Incra I-Box Box Joint Jig for Table Saw & Rotuer Table
INCRA I-Box is the most advanced tool ever produced for creating a stunning variety of box joints & finger joints. It features a fast setup for basic joints, plus advanced capability for unique decorative joints. This single jig can be used on both your table saw and your router table.
Incra's I-Box box joint jig is a precision cutting machine that makes joinery fun! This single jig can be used on both your table saw and your router table, and the I-Box's dual-pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1/8" - 3/4" range of pin widths in lumber up to 1" thick.
Yes, I said router table. The INCRA miter bar fits standard 3/4" x 3/8" miter slots.
The miter bar is easily adjusted for a smooth, perfect fit from above, to fit with a 0.740" - 0.762" adjustment range.
The indexing pin is about as versatile and easy to adjust as possible.
The pin is set by adjusting up against the blade or bit being used.
The beauty here is when used on a right-tilt saw, the adjustment stays the same, while the size of the blade set changes. Simple!
And a simple cutout in the jig allows the user to see down to the indexing pin with ease!
The next few images give only a sample of the joinery possible with the I-Box!
Custom hinges? Why not!
The possibilities are endless with Incra's I-Box Box Joint Jig!
