Edge Making Router Bits

Edge Making Router Bits for Every Profile and Application

Edge profile router bits are among the most-used bits in a woodworking shop. Whether you are softening a sharp corner with a simple roundover, adding classical detail with an ogee, creating a shadow line with a chamfer, or forming a decorative bead, the right edge bit makes the difference between a flat board and a finished piece of furniture. Our edge making router bit collection covers more than 30 profiles to serve every woodworking style and application.

Classic profiles include the ogee router bits, chamfer bits, and roundover beading bits, all available in 1/2-inch shank for maximum stability in table-mounted routing. The brass-guided roundover bits in 1/4-inch shank are ideal for handheld router work where a bearing alone may not provide enough surface contact on narrow stock.

Multi-Profile and Specialty Edge Bits

For shops that want versatility in a single tool, the Multi Radius Router Bit with 3-Piece Bearing Kit produces three different roundover radii by swapping bearings, and the Three-in-One Router Bit cuts a roundover, fillet, and shoulder in a single pass. The Queen Anne bit and Thumbnail bit add period-furniture detail for traditional cabinetry and face-frame work.

Rabbeting is another essential edge operation — the 7-piece Rabbeting Router Bit Combo Kit provides a full set of bearing sizes for cutting rabbets of multiple depths with a single bit body. For shaper-based shops, see our companion edge making shaper cutters collection.

Frequently Asked Questions

What are edge making router bits used for?

Edge making router bits cut decorative and functional profiles along the edges and faces of wood boards and panels. Common profiles include roundovers, ogees, chamfers, coves, beads, and bullnoses, each used to add visual interest or soften a corner on furniture, cabinetry, and millwork.

What is the difference between a 1/4-inch and 1/2-inch shank router bit?

Shank diameter affects rigidity and vibration at the bit. A 1/2-inch shank bit is stiffer and runs more smoothly at higher speeds, which produces a cleaner cut with less chatter. Use 1/2-inch shank bits for larger profiles and table-mounted routing whenever your router collet supports it.

Can I use edge router bits in a handheld router?

Yes. Most edge bits with a pilot bearing can be used freehand with the bearing riding along the workpiece edge. The 1/4-inch brass-guided roundover bits are specifically suited for handheld work on narrower stock.

What is a multi-radius router bit?

A multi-radius router bit uses interchangeable bearings of different diameters to produce roundover profiles of different radii from the same bit body. The Multi Radius Router Bit with 3-Piece Bearing Kit provides three radius options without needing separate bits.

What is a rabbeting bit used for?

A rabbeting bit cuts a stepped recess along the edge of a board, used for panel captures in cabinet backs, glass rabbet in door frames, and drawer slip joints. The 7-piece Rabbeting Combo Kit includes multiple bearing sizes to cut rabbets of different depths with one bit body.

What is the difference between a roundover and a beading router bit?

A roundover bit curves the top edge of a board in a quarter-circle arc and leaves a flat fillet at the bottom. A beading bit produces a similar curved profile but adds a small shoulder on each side, creating a raised bead with defined edges for a more decorative appearance.

Are shaper cutters better than router bits for edge profiles?

For production work and heavy stock removal, shaper cutters mounted on a spindle shaper offer more power and mass than router bits, which reduces vibration and extends cutter life. For most shop woodworking, carbide-tipped router bits are fully capable. Compare options in our edge making shaper cutters collection.

What feed direction should I use when routing an edge profile?

When using a handheld router, feed against the bit rotation — move from left to right when the bit is in front of you. At the router table, feed from right to left. Climb cutting against the standard feed direction is an advanced technique and should only be used for light finishing passes.

Does Infinity Tools offer a quality guarantee on router bits?

Yes. Infinity Tools backs the quality of its router bits. Visit the quality guarantee page for complete terms, or contact the team with specific questions.

Where can I learn more about choosing and using edge router bits?

The Infinity Tools Learn blog covers router bit selection, profile matching for furniture styles, router table setup, and cutting techniques for producing clean, tear-free edge profiles.