A great shop runs on sharp, clean tools. A dull blade or a rusted bit doesn’t just make your work harder—it compromises safety, accuracy, and the quality of your finished piece. You wouldn’t build a masterpiece with a chipped chisel, so why run your saw blades and router bits into the ground?
That’s where the Boeshield 3-Pc Maintenance Pack comes in. Developed by Boeing for aerospace applications, Boeshield’s cleaning and protective products have become a go-to in woodworking shops for keeping blades, bits, and surfaces clean, corrosion-free, and cutting at their best.
This blog will walk you through why maintenance matters, what’s inside the Boeshield kit, and how to work a simple maintenance routine into your shop schedule. Whether you’re running a professional shop or just keeping your home workshop in top condition, Boeshield is a must-have.
Why Tool Maintenance Should Be Non-Negotiable
Better Performance
Pitch, resin, and sap buildup on blades cause more friction. More friction means more heat. More heat means burned cuts, faster dulling, and greater strain on your saw’s motor.
Clean blades cut cooler, quieter, and straighter—period.
Longer Tool Life
Corrosion is the silent killer of woodworking tools. Even in a climate-controlled shop, humidity can cause rust. A thin coat of protectant prevents oxidation and keeps your investment safe.
Improved Safety
A dull or dirty blade increases the risk of kickback. Clean, sharp tools are safer tools.
What’s Inside the Boeshield 3-Pc Maintenance Pack?
The Boeshield kit gives you three products to cover every stage of maintenance—cleaning, rust removal, and protection.
1. Boeshield Blade & Bit Cleaner
Removes pitch, resin, and gummy buildup from saw blades, router bits, and other cutting tools.
How to use:
- Spray on the surface
- Let it soak for 1–2 minutes
- Wipe clean with a shop towel
- Rinse with water if needed
Result: Restores cutting edges without damaging carbide or steel.
2. Boeshield Rust Free
A fast-acting rust remover for cast iron, steel, and other metal surfaces.
How to use:
- Apply to affected area
- Let sit briefly (do not allow to dry)
- Scrub with a non-abrasive pad
- Wipe clean and dry
Result: Rust-free surfaces ready for protection.
3. Boeshield T-9 Protectant
The star of the kit. T-9 is a thin-film, waterproof lubricant that penetrates and protects. Once dry, it leaves a waxy, non-sticky coating that repels moisture and prevents corrosion.
How to use:
- Spray on clean, dry surface
- Let dry for 2 hours (longer in humid conditions)
- Buff lightly if desired
Result: Long-lasting protection that doesn’t attract dust.
Step-by-Step Maintenance Routine
Step 1: Remove the Tool
Always disconnect power before removing blades, bits, or cutters for cleaning.
Step 2: Clean with Blade & Bit Cleaner
Apply Boeshield Blade & Bit Cleaner to remove pitch and resin. Wipe clean.
Step 3: Remove Rust with Rust Free
If rust is present, treat with Rust Free before protecting.
Step 4: Protect with T-9
Spray T-9 Protectant on the blade, bit, or table surface. Allow to dry before use.
Step 5: Maintain Regularly
Incorporate a quick check every month or after heavy use. A few minutes of maintenance can save hours of frustration.
Where to Use Boeshield in the Shop
- Table Saw Blades – Keep teeth clean for cooler cuts.
- Router Bits – Prevent buildup that dulls edges.
- Planer & Jointer Knives – Reduce friction and protect from rust.
- Cast Iron Tables – Stop rust rings from developing under jigs or stock.
- Bandsaw Blades & Guides – Extend blade life and maintain smooth tracking.
- Drill Bits & Forstner Bits – Clean pitch and prevent corrosion.
Complementary Products for a Complete Workflow
Boeshield is the final step in a full cut-to-finish process:
-
Cut with Precision: Super General Saw Blade
Start with accurate, clean cuts. -
Work with Control: MicroJig Safety Tools
Keep your hands safe and feed consistent. -
Glue with Confidence: Titebond Glues
Secure strong joints for long-lasting builds.
Boeshield ensures all those tools stay sharp, clean, and ready for the next project.
Real-World Feedback
“After I started using Boeshield, my blades last at least twice as long between sharpenings.”
—Ken W., Pro Cabinetmaker, MI
“T-9 is my go-to for cast iron tables. Zero rust issues in a humid garage shop.”
—Marcy T., Hobbyist Woodworker, GA
Win a Boeshield Maintenance Pack
The Boeshield 3-Pc Maintenance Pack is included in our Cut to Finish Pro Pack Giveaway—so you can keep your shop running like new without spending a dime.
Final Thoughts: Protection Pays Off
Sharp, clean, and rust-free tools are a joy to work with. They save time, improve results, and make woodworking safer. A few minutes of maintenance with Boeshield can extend tool life, reduce frustration, and keep your projects looking their best.
Your tools work hard for you—return the favor. Protect them.
Full Giveaway Blog Series:
→ Cut with Precision: Super General Saw Blade
→ Work with Control: MicroJig Safety Tools
→ Glue with Confidence: Titebond Glues
