Router Bit Vise
Holding router bits in your hand when taking off or putting on bearings and nuts is painful and can be dangerous! Our innovative vise holds your router bits securely while you easily remove or install bearings or nuts. It's also perfect for holding bits when cleaning off carbide edges with a wire brush. Precision CNC machined from 6061 grade aluminum and ergonomically contoured to fit comfortably in your left or right hand. The secret to its easy operation are the three unidirectional needle bearings used to securely hold your 1/2", 8mm and 1/4" shank router bits. Once inserted into the correct opening, the needle bearings lock your router bits' shank securely in place so you can easily loosen or tighten bearing screws, nuts and perform routine bit maintenance. Black anodized to prevent corrosion and to provide years of service. Simply use the rare earth magnets to attach to any magnetic surface in your shop for safe storage.
102-Pc. Hex Driver Set
The Infinity 102-Piece Hex Screwdriver set includes all of the most commonly used ¼” hex driver bits as well as a huge assortment of unusual and hard to find styles and sizes. The set comes in a compact storage case where each bit is labeled with its design and size making it easy to always find the right bit.
The compact bit driver handle is perfect for those delicate jobs where precision is needed. Several adapters and extensions are included allowing you to adapt ¼” square drive sockets and ratchets to be used on the hex drive handle or in drills and other power drivers. No need to wonder if you have the right bit for a job. With this 102-Piece Set you'll ensure that you always do!
JessEm 6-Pc. Saddle Square Set
Saddle squares have been essential layout tools since the days of ancient Egypt. Unlike standard measuring tools that only mark a single surface, saddle squares solve a critical challenge: transferring precise markings across corners onto adjoining surfaces. The result? Perfectly aligned lines every time—no guesswork, no misalignment.
This JessEm set includes saddle squares for straight 90° cuts, 45° miters, as well as the four most common dovetail angles: the 1:6, 1:7, 1:8 and 14° sizes. Made of solid steel and precision laser cut, they’ll give you accuracy and repeatability for years to come. Plus, they include an anti-skid surface on the back, so they’ll stay put while you’re drawing your lines.
13-Pc. T-Handle Screwdriver Set
This handy T-Handle Screwdriver can replace a drawer full of standard drivers and keep them all nicely organized. Not only can the head ratchet to both tighten and loosen screws but it can be set in three different positions to provide additional torque or reach into tight places. The base of the screwdriver has a storage compartment that holds the 13 included drive bits.
To switch between fixed and ratcheting drive modes, simply twist the collar at the top of the screwdriver body. Pulling this collar forward will allow the head to be rotated and locked into one of three working positions including; straight, right-angle, or t-handle. This clever design makes it one of the most versatile drivers you'll own. Keep one of these in your toolbox, kitchen drawer or glovebox and you will never have to hunt for the right screwdriver again.
Adjustable Drill Depth Stops
Typical drill depth stops have set screws that are easy to cam out, don't always grip very well, or sit evenly on the bit. The unique two part, dual set screw design of our Universal Adjustable Drill Depth Stops addresses these shortcomings. All one needs to do is slide two halves of the depth stops slide over your bit to the desired stopping point. Then tighten each screw just until resistance is encountered, alternating back and forth until each screw is fully tightened. This ensures consistent grip and seating, even on bits with very large or oddly shaped flutes. No more accidentally overtightening to avoid slipping down or off the bit, or crooked seating. Plus, since these adjust to such a wide size range, you only have to keep track of one or two depth stops instead of a whole set for each size drill bit you own.
iGaging Angle Cube Digital Angle Guide
The iGaging Digital Angle Gauge attaches to any metal surface and accurately measures angles with digital precision. No more guessing the setup of your important bevel cuts on your jointer, table saw, bandsaw or drill press table. It's easy to operate; simply set the unit on a flat reference surface, press the ZERO button to calibrate and then attach it to your saw blade, tablesaw or bandsaw fence and precisely adjust to the desired angle.
The iGaging Angle Cube is precision CNC machined and uses a USA made angle sensor that measures +/- 0.2 degree accuracy with a resolution of 0.05 degrees at a range of +/- 90 degrees. Strong magnets hold the unit in place to any steel or iron surface while the the large LCD screen makes it easy on the eyes.
The Gift That Always Fits! 
Choosing the perfect gift for your favorite woodworker is not always easy, especially if it seems like they already have everything. That's why we've made gift giving easier than ever. Purchase one of our Infinity Tools gift certificates and you can be sure the woodworker who receives it will be very pleased.
Whether it's a birthday, holiday, graduation, or other special occasion we've got thousands of unique and hard to find woodworking tools and accessories to choose from. Simply purchase the gift certificate and make sure to add your custom note in the comments section during checkout.
There is no expiration date so the card can be used any time. It's that easy! Gift certificates are redeemable by telephone or online.
