Lignomat Mini-Ligno E/D Moisture Meter
$119.90
Unit price
/
Unavailable
Moisture Can Ruin Your Next Project - Prevent The Heartache With Our Moisture Meter
The Problem…
If your raw lumber does not contain the correct moisture content your finished project will likely shrink and warp over time, ruing your hard work and causing endless frustration. This problem becomes more evident when the raw material you use has a moisture content which deviates substantially from other 'normalized' projects in your home. Since moisture content in wood can vary over 50% depending on your climate zone it's not a good idea to leave your raw stock's moisture content to chance.
The Solution….
Using a high quality moisture meter will enable you to select the right lumber for your projects – saving you time, money and agrevation. The trick is to accurately match the moisture content of your current furniture and then use raw lumber with the same or similair moisture content for your new projects. To determine the ideal moisture content of your raw material use our accurate moisture meter and you'll quickly know the exact moisture content before tackling your project.
The Right Tool….
The rugged, compact mini-Ligno E/D moisture meter is easy to use: remove the protective cap and push the pins into a piece of wood. The meter turns itself on automatically and the bright LEDs instantly show you the wood’s moisture content. Best of all, wood species corrections are built-in and the easy-to-use pocket guide lists the most common woods and the corresponding wood groups.
Other features include;
Don't miss our Lignomat Mini Ligno E/D Blog Post here!
Click here to download our informational article on wood moisture and the problems it can cause.
Why do you need a moisture meter? Click here to read all about it.
Read the Fine Woodworking Magazine review of the Lignomat Mini-Ligno E/D Moisture Meter here.
Newest to Oldest
- Highest to Lowest
- Newest to Oldest
- Favorite Reviews
All Ratings
- All Ratings
- 5 ★ Reviews
- 4 ★ Reviews
- 3 ★ Reviews
- 2 ★ Reviews
- 1 ★ Reviews
Write a Review
Lignomat Mini-Ligno E/D Moisture Meter How would you rate this product?
Please fix above errors. 
Brent H. Verified Customer 
04-11-25
I purchased the 6' Dadonator Jr expecting it to perform as described in Infinity Cutting Tools catalog. For the most part it performed as expected. Issues with the actual dado width produced by the blade were not what I was expecting, dado width was close to 1/64' oversized. Customer support experience was not a pleasant one. After many back and forth emails to convince Infinity that I was properly installing and using the blade they agreed to returning the blade for diagnosis at their facility.Three aggravating weeks later Infinity agreed that the blade was not within their specifications and offered to return the blade or give a refund. I chose the refund. During this entire process I got the distinct impression that Infinity Cutting Tools was convinced that their product was not the problem but rather it was something I was doing wrong ,in the end Infinity begrudgingly agreed that the fault was the Dado blade and not user error. Will I buy other Infinity Cutting tools in the future? Yes I most likely will. Nothing is perfect, mistakes happen and I try to be a gracious person.
Customer Service1 / 5
I was wanting a dado blade that didn’t leave “bat ear” undecuts at the outside edges of the dado groove
Jack J. Verified Customer 04-09-25
My overall experience has been very positive.
Reply from infinitytools.com
Customer ServiceThank you for the feedback, Jack! We’re glad to hear you had such a positive shopping experience. We hope to see you back soon!
5 / 5
Because I have an affinity for wood handplanes.
Jerrod R. Verified Customer 04-07-25
I love the equipment works as designed. Easy to set up. My only complaint is the price is to high.
Reply from infinitytools.com
Hey Jerrod, thanks for your feedback. We are very competitivey priced and also offer free shipping on most orders over $100. If you have additional questions just reach out our office hours are Monday – Friday, between 8:30 am and 5:00 pm ET. Just give us a call or send us an email to open a support ticket, and we’ll jump right on it! 877-872-2487 | support@infinitytools.com
The moisture content of your wood is one of those horrible little things that you must constantly be aware of. No one wants to build a cabinet and then find out a year later that a panel has shrunk by a 1/4" or more. Some of the more common moisture problems that can occur are shrinking, warping, swelling, delamination, bad finishes, and loose joints. Most of these problems can be solved by making sure you have dry, stable wood that has acclimated gradually to your shop's climate. And here's where we get into what is called Equilibrium Moisture Content.
Simply put, EMC is a state of moisture saturation that has reached a stable point (relatively speaking). Before you mill up that beautiful piece of maple you need to figure out if its moisture content is the same as your shop's. If the moisture content of your wood is not very close to the moisture content of your shop, bad things can happen. So how close do the two need to be? One article we found from the January 2010 Fine Woodworking Magazine stated that "...even a 2% change can mean a lot. In general, a 1% moisture change in hardwood will result in a bit less than 1⁄32 in. of expansion or contraction per 10 in. of board width. A 2% moisture difference results in a dimensional change of 1⁄16 in."
To calculate your shop's EMC you need only know the temperature and relative humidity. Then you can use a handy online calculator like this one here to figure out your shop's EMC. And if we know the relative humidity and temperature, and therefore the EMC, of any location where your lumber is stored, we can quickly find out the optimum moisture content of the lumber you'll use for your projects.
So now you know where this is heading right? To make beautiful woodworking projects that stay structurally stable you'll need to know the moisture content (MC) of your wood. And you can't do that by touching it or even by staring at it, you'll need a high quality moisture meter. In the Infinity Tools Wood Lab, we really love the Mini-Ligno Lignomat Moisture Meter with Electronic Display.
The Mini-Ligno E/D is an affordable pin style meter that will tell you exactly what the moisture content of your wood is.I have had a nice chunk of Rosewood that I've been aching to resaw into a bunch of parts for some boxes, but I've really wanted to make sure it was acclimated to my shop before I used it. That's where the Mini-Ligno comes into play. Rated the Best Overall Choice by Fine Woodworking Magazine (January 2010), this super easy-to-use pin-style moisture meter can tell me exactly when I am good to go. The device comes with a nice soft storage case that helps to keep it dust free when not in use. There is also a green protective cap that makes sure your pins don't get damaged and when placed on the end of the device, gives you a nice curved support that mimics the contour of your hand. Between the two pins is the on-off switch. Whenever you push the pins into a chunk of wood, the on-off switch is automatically engaged making operation a breeze.
The Mini-Ligno Moisture Meter is a perfect sized tool that gives you accurate readings easily
The ergonomically designed green protective cap when placed on the other end of the meter gives your hand a comfortable grip for easy pin insertion.
The Mini-Ligno comes with two sets of pins (3/16" and 7/16" long) to help you get accurate readings every time.
In between the two pins is the on/off switch. You can press the switch twice to toggle back and forth between the two wood groups.
The Mini-Ligno is an accurate, easy-to-use device that will really help you pinpoint moisture issues in your wood and keep wood movement issues in check. It's also portable and will be a good tool to have with you when shopping for wood at the lumber yard. Moisture meters are also outstanding for when you need to replace a part on an antique piece of furniture. You can make sure that the piece of furniture and the replacement part have the same moisture content.
[youtube=http://www.youtube.com/watch?v=qyNrC8JlquU&w=475&h=267]
Please visit the Infinity Tools website for more great products and information.
