Sistemas magnéticos Magswitch

Magswitch uses a switchable permanent magnet technology—rotating the base activates or deactivates the magnetic field with a twist. When active, the base bonds firmly to cast-iron machine surfaces. When switched off, the base lifts away cleanly, allowing instant repositioning without any fasteners or tools.

Magswitch bases are designed for cast-iron surfaces, which include table saw tops, router table inserts, jointer beds, and bandsaw tables. They do not adhere to aluminum or wood surfaces. Most traditional woodworking machinery with cast-iron tables is compatible.

Horizontal featherboards apply lateral pressure to keep stock against the fence during ripping. Vertical featherboards—like the Magswitch Vertical Featherboard Attachment—apply downward pressure to keep stock flat on the table. Using both together provides full three-dimensional workpiece control.

The Magswitch Workholding System Starter Kit is the recommended starting point. It includes a universal magnetic base and essential accessories to establish magnetic workholding on a table saw or router table.

Yes, provided the router table has a cast-iron or cast-iron insert top. Magswitch featherboards and guides position accurately on router table surfaces to keep stock against fences during edge profiling and groove cutting.

The Magswitch Resaw Guide is a single-point fence for the bandsaw that mounts magnetically to the bandsaw table. Its single-point contact allows you to steer stock to compensate for blade drift while maintaining a consistent thickness during resawing.

Free shipping is available on most orders over the qualifying threshold. Visit the shipping policies page for current details.

Magswitch featherboards mount without reaching into the blade zone—a significant safety advantage over featherboards that require tightening clamps near the table saw blade. The instant on/off switching also means the board never accidentally releases mid-cut.

The Magswitch MagJig 150 is a general-purpose switchable magnetic base that accepts a range of Magswitch accessories. It can function as a universal mounting point for custom jigs, stops, and guides on any ferrous machine surface.

The Infinity Tools learning center covers table saw setup, featherboard use, and workholding techniques. You can also browse our Shop Essentials collection for additional safety and setup accessories.