Infinity Tools carries six General Finishes topcoats: High Performance Top Coat (water-based), Armrseal (oil-based), Enduro-Var II (water-based with amber tone), Exterior 450 Clear Top Coat, Wood Bowl Finish, and a Satin Topcoat. See all options in the top coat collection.

Water-based topcoats dry clear, have low odor, recoat in hours, and clean up with water. Oil-based topcoats require 24 or more hours between coats but produce a harder final film, impart a warm amber color to the wood, and excel in ultra-high-gloss or heavily polished applications.

Most water-based topcoats from General Finishes dry completely clear and will not yellow over time—making them excellent for white paint, light stains, and natural maple or ash. The exception is Enduro-Var II, which is a water-based formula specifically designed to amber the wood in a manner similar to oil-based finishes.

Yes, but the oil-based stain must be completely dry and cured—typically 24–72 hours depending on temperature and humidity—before applying a water-based topcoat. Applying water-based finish over uncured oil can cause the finish to fish-eye, bead, or remain tacky.

Two to three coats of a water-based topcoat (lightly sanding between each coat with 320 grit or a scuff pad) is standard for furniture. High-traffic pieces like tabletops benefit from a third or fourth coat. Oil-based topcoats typically require fewer coats because each coat is thicker and harder.

General Finishes topcoats are available in flat, satin, semi-gloss, and gloss sheens, depending on the specific product. Satin is the most popular choice for furniture as it provides a refined, low-reflective look that doesn't show fingerprints or imperfections as readily as gloss.

Armrseal is a durable, oil-based polyurethane topcoat designed for floors, bar tops, and other ultra-high-traffic surfaces. It produces one of the hardest film surfaces in the General Finishes lineup, making it ideal where abrasion resistance and maximum durability are the primary requirements.

The General Finishes Wood Bowl Finish is designed specifically for turned wooden bowls and other food-contact surfaces. Always check the product label to confirm food-safe status after full curing before using on utensils or cutting surfaces.

The General Finishes Exterior 450 Clear Top Coat is formulated specifically for outdoor use and provides UV resistance and moisture protection for exterior furniture, doors, and millwork.

Work quickly in thin, even coats and avoid overbrushing. Use a quality synthetic bristle brush or foam applicator, and if brush marks are an issue, adding a small amount of General Finishes Dry Time Extender slows the dry time enough to let the finish self-level before it sets. Explore our brushes and applicators for suitable tools.