Accesorios para recolección de polvo

Most woodworking shop dust systems use 4" main ducts from the collector to tool drops, then transition to 2-1/2" branch lines at blast gates for individual tools. Handheld tools connect via 1-1/4" hoses. Using the correct reducer at each transition maintains airflow velocity so chips do not settle and block the duct.

Plastic blast gates are lightweight, affordable, and suitable for most hobby and semi-professional shops where gates are opened and closed periodically. The 4" aluminum blast gate is more durable under frequent use and heavy chip loads, and resists warping better than plastic in temperature-variable shop environments.

You need one blast gate per tool drop in your duct system. If your collector connects to five machines, you need five blast gates — one at each drop, so you can open the active tool's gate and close the rest to concentrate suction. Only one gate should be fully open at a time for optimal collection performance.

Yes. A common approach is to run 4" main duct from the collector through the shop and reduce to 2-1/2" at each tool connection with a 4" to 2-1/2" reducer. This maintains adequate velocity in the main duct while matching the smaller ports on hand-tool-sized connections.

A Y-fitting splits a single duct run into two branches, allowing one main line from the collector to serve two separate tool stations. Install a blast gate on each branch so you can direct airflow to whichever tool is active. Y-fittings are more airflow-efficient than 90-degree T-fittings.

A quick-connect fitting like the 4" quick connect/disconnect uses a friction-lock or bayonet mechanism to connect and release hoses without tools. It is particularly useful on moveable tools like drum sanders or drill presses, where you connect the hose when using the tool and release it to restore floor space when done.

Universal adapters like the FastCap UniVac Universal Vacuum Adapter include a stepped cone that fits dozens of different port diameters, bridging the gap between non-standard tool ports and standard vacuum hoses. For common router-to-vacuum connections, dedicated kits from hose and accessory options provide a cleaner permanent solution.

Most table saw dust ports are 4" diameter. Connect from the port with a short section of 4" flex hose to a blast gate, then to the main duct with a 4" splice into your duct run. The Milescraft Table Saw Dust Cutter in the full dust collection system section improves below-blade chip capture.

Most shop dust collection fittings follow standard diameter conventions (4", 2-1/2", 1-1/4") and are interchangeable across brands. Occasional discrepancies exist in exact outer versus inner diameter — use splices, couplers, and adapters to connect mismatched parts. The 2-1/4" x 2-1/2" Quick Coupler is a common example of an adapter bridging a slight size mismatch.

Yes. The fittings collection includes blast gates, reducers, elbows, Y-fittings, splices, quick-connects, and magnetic ports in the sizes used by the vast majority of woodworking tools. If you need help planning a system layout, visit the learning center or contact the team for guidance.