Dust Collection Flanges & Hoods for Woodshop Machines

Q: What jointer size flange do I need for a 6-inch jointer?

A 6-inch jointer typically uses the 6-1/2" jointer flange , which is sized to fit the chip opening of most 6-inch capacity jointers. Verify by measuring your machine's chip port opening.

Dust Collection Flanges, Hoods & Floor Sweeps for Woodshop Machines

Capturing dust at its source is the most effective strategy for keeping a woodshop clean and protecting your lungs. This collection covers the connection hardware that links your machines and work surfaces to a dust collection system—including machine-specific flanges for table saws and jointers, universal hoods for routers and sanders, and floor sweeps for cleaning up fine dust that settles between machine runs.

Machine-specific flanges attach directly to the dust port opening of a particular tool to create a sealed, efficient connection. The 14" table saw flange and 12" table saw flange fit the shroud openings on common cabinet and contractor saws. Jointer users can choose between the 8-1/2" jointer flange and 6-1/2" jointer flange to match their machine's chip opening.

Hoods, Floor Sweeps, and Universal Options

For tools without a dedicated port, dust hoods capture chips and fine particles from above or at the side of the cut zone. The Big Gulp Dust Hood handles high-volume chip sources, while the Mini Gulp Dust Hood is sized for routers, scroll saws, and smaller benchtop tools. The 21" floor sweep connects to your dust collector hose for vacuuming fine dust from shop floors. The 6" universal flange and 2-1/2" universal dust port provide flexible connection points for machines without a purpose-built fitting.

Table saw flanges in 12" and 14" sizes
Jointer flanges in 6-1/2" and 8-1/2" sizes
Big Gulp and Mini Gulp hoods for open-face capture
Floor sweep for cleaning fine dust between sessions

Frequently Asked Questions

What is a dust collection flange and how does it differ from a dust hood?

A flange is a rigid fitting sized to match the specific chip opening or dust port of a machinesuch as a table saw or jointercreating a sealed connection to the duct run. A dust hood is an open-faced capture device positioned near a cutting zone to collect dust that does not have a dedicated port.

Which table saw flange size do I need?

Table saw flanges are sized to match the blade shroud opening on your specific saw. Common sizes are 12" and 14"—check your table saw manual or measure the chip opening before ordering the 14" flange or 12" flange.

What is the Big Gulp Dust Hood used for?

The Big Gulp Dust Hood is a wide-mouth capture hood designed for high-volume chip producers such as router tables, band saws, and stationary sanders where chips must be captured above or beside the cut.

Can I connect these flanges to both 4-inch and 2-1/2-inch duct systems?

Flanges and hoods in this collection come in different outlet sizes. Check each product's outlet diameter to confirm it matches your duct run. The 2-1/2" universal dust port fits smaller hose systems, while larger flanges connect to 4-inch trunk lines.

What is the 21-inch floor sweep used for?

The 21" floor sweep attaches to a standard shop vacuum or dust collector hose and slides along the floor to vacuum fine sawdust that accumulates between machine operations, keeping fine airborne particles off the shop floor.

What jointer size flange do I need for a 6-inch jointer?

A 6-inch jointer typically uses the 6-1/2" jointer flange, which is sized to fit the chip opening of most 6-inch capacity jointers. Verify by measuring your machine's chip port opening.

What is the 2-1/2" hose adapter for mini cyclone separators used for?

The 2-1/2" hose adapter connects a standard 2-1/2-inch dust hose to a mini cyclone separator, allowing fine dust to be separated and collected before reaching the main filter of a shop vacuum or collector.

How does a dust hood improve air quality compared to no dust collection?

Without dust collection, fine wood dust becomes airborne and recirculates through the shop environment. A properly positioned dust hood captures particles at the source before they disperse, dramatically reducing airborne dust concentration and protecting lungs from repeated exposure.

Does Infinity Tools offer a quality guarantee on dust collection hardware?

Yes. All purchases are backed by the Infinity Tools quality guarantee—review the page for full terms and conditions.

Where can I find guidance on planning a dust collection system layout?

The Infinity Tools learning center includes articles on dust collection system design, duct sizing, and machine connection strategies for woodshops of all sizes.

Bridas y capotas