Famag 2-Pc  Forstner Bit Extension KIt

This kits allow you to extend the length of the Forstner bit for any requried application. Available Available in 8mm & 10mm. With four attachment screws for fixing. Perfect for drilling deep holes.

Famag #2 Morse Taper for 10mm Hex Shank Forstner Bits

Designed for mounting a Forstner bit on your lathe, for horizontal boring.

Famag 5-Pc. Depth Stop Set For Forstner Bits

This depth stop set is designed to work with Famag Forstner bits. Each depth stop is supported by a ball-bearing mounted bushing and stops rotating as soon as it touches the work-piece. The guide bushing is mounted on the shank using a grub screw and depth is adjusted accordingl, making it so holes can always be drilled at the same depth. The depth stop is made from ABS and has an outer diameter of 65 mm. The guide bushing is made of steel.

For deeper depths, it is possible to mount the guide bushing in reverse. In this case, the Forstner bit should be larger than the guide bushing, which has a diameter of 26 mm.

The set includes five guide bushings, a hex key, a pair of circlip pliers and a wooden case.