Premium Blade For The Festool Kapex

Woodworkers know that any saw is only as good as the blade you put in it. For Festool Kapex users this has typically meant shelling out big bucks for OEM blades that most agree do not qualify as premium and, arguably, are simply overpriced. This is exactly why we are proud to offer a true premium miter saw blade for the Festool Kapex with the same features you have come to expect from Infinity Cutting Tools. Let's take a closer look at the 260mm Miter-Max Saw Blade, 010-281.

Diameter and Bore

Here at Infinity, we offer three different miter saw specific blades, including a 10" blade with 5/8" bore, a 12" blade with 1" bore, and now a 260mm blade with 30mm bore made specifically for miter saws like the Festool Kapex.  Why not just make a 10" blade with a 30mm bore? The answer is simple. We don't like to cut corners... no pun intended. That extra 6mm (.236") means all the  Kapex features like scoring functions work as intended.

Premium Materials

If you have used an Infinity Tools circular saw blade in your table saw before, you know exactly what to expect from the Miter-Max 010-281. We start with cold-rolled steel bodes that are laser cut, stress relieved, and tensioned, ensuring a blade that runs true in even the most demanding situations.  Then, we add C4 micro-grain carbide teeth that take a sharper edge and are physically larger than the competition. This means your Infinity blade will last longer between sharpening—not to mention increasing the number of times you can have our blades re-sharpened with excellent results. Finally, we Chrome-Armor plate each blade. This Chrome-Armor plating has several advantages over paint. Chrome-Armor is tougher and won't wear off, it's highly corrosion-resistant, it's slick and reduces heat generation, it makes cleaning away pitch and sap buildup easier, and it looks great.

Tooth Count and Geometry

The 010-281 Miter Saw Blade has 80 teeth configured in an ATB-R geometry. For every set of five teeth, there are four 30° ATB teeth and one triple-chip raker tooth. What does this mean for you? It means you can expect an extremely smooth and consistent crosscut, excellent blade longevity, and an almost perfectly flat bottom kerf. Each tooth also has -5° of rake. A negative rake reduces climbing and self-feeding of the blade when used in miter saws.  In other words, The blade is safer, easier to control, and more predictable in a variety of materials. This is especially true in sliding saws like the Kapex.

Add A ZCI for Ultimate Performance

If you want to get even more performance from your Kapex miter saw, consider adding a Zero Clearance Insert ("ZCI" for short). We offer a complete line of ZCI's with replaceable inserts for a large variety of miter saws from companies like Festool, Dewalt, Bosch, and Makita. Just like on your table saw, a Miter Saw ZCI will reduce tear-out, improve cut quality, and increase safety by supporting material close to the blade.

You don't need to look for a high-quality replacement blade for your Festool Kapex any longer. The 260mm Miter-Max Saw Blade, 010-281 is the blade you have been waiting for.