Infinity Tools Pepper Mill and Salt Shaker Combo Turning Kit

The kit includes all the hardware needed for the project: a ceramic grinder mechanism, a stainless steel grinder shaft, a nickel-plated salt shaker cap and adjusting nut, and a plastic grinder sleeve. You supply the turning tools and the wood.

You supply the wood blank and the turning tools. Infinity Tools offers most of the tools you may need if you do not already have them; see our woodturning tools.

No. The kit uses a ceramic grinder mechanism that will not corrode, and the plastic grinder sleeve protects the stainless steel shaft from corrosion as well.

The project calls for a 1-1/2" Forstner bit and a 1-1/16" Forstner bit, plus an optional bit extension. A 7/16" drill bit is also used.

You will need a drill press, a lathe, a screwdriver, a wood blank of your choice, and the turning tools necessary to create your desired profile, along with the Forstner and drill bits listed.

The plastic grinder sleeve fits over the grinder shaft and extends through the salt reservoir at the top to protect the shaft from corrosion. Its flared base also aligns the top and bottom turned pieces.

The hardware has a gunmetal, almost-black finish that imparts a sleek, refined look to your turned piece.

It is a fun project that includes all the hardware, so you can focus on turning your chosen profile. Stock up on woodturning tools and you are ready to get started.

Sharp gouges and skews give the cleanest cuts on the mill and shaker bodies. Maintain a keen edge with quality sharpening supplies.

It is made by Infinity Cutting Tools. A matching Famag boring kit is available separately to drill the bores for this specific project kit.