Kreg 530 Micro-Pocket Drill Guide

The Kreg 530 is made for Kreg 500-Series pocket hole jigs. For 700-Series jigs, the matching guide is the Kreg 730. Explore compatible pocket hole jigs.

The Kreg 530 creates a pocket hole that is 25% smaller than a standard Kreg pocket hole, which is appropriate for narrow and thinner stock.

It includes the Micro-Pocket Drill Guide Block, an Easy-Set Micro-Pocket Drill Bit and Stop Collar, a Hex Key, and a Material Thickness Gauge.

Use it for 1/2" or narrow stock, or when you need smaller holes for extremely hard wood that is difficult to drill with a larger-diameter bit.

Simply snap it into the slot where the standard drill guide normally fits on your 500-Series jig, and it's ready to use — no tools required for the swap.

Yes. Beyond thin and narrow stock, the smaller bit is also useful for materials that may be difficult to drill with larger-diameter bits, including very hard woods.

Yes. Because it snaps into the same slot as the standard drill guide, you can switch between standard and micro-pocket holes on the same 500-Series jig.

It's made by Kreg Tool as an accessory for its pocket hole jig systems. Browse more drilling & boring tools.

Yes. The set includes an Easy-Set Micro-Pocket Drill Bit and Stop Collar sized for the smaller pocket hole. Find more drill bits & drivers here.

The Kreg 530 fits Kreg 500-Series jigs, while the Kreg 730 fits Kreg 700-Series jigs. Both create the same 25%-smaller micro-pocket hole for narrow and thin stock.