Infinity Cutting Tools Q&A
Do you sell individual bearings for router bits? I dropped my 06-694 bit and damaged the bearing. View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits
The milescraft featherboard work on the infinity router table? View answer
Asked 8 ´years ago | Milescraft Featherboard
Which Milescraft frame square is the standard? I’m looking for the 8405 standard, possibly item #100-024? View answer
Asked 6 ´years ago | Milescraft FrameSquare
I want to buy a metric Frame Square 500. How do I order the correct one, as I don't want an imperial one? View answer
Can I use a 5 pad on a 6 Mirka Deros sander, or do I need to purchase a 6 kit? The 6 model is 220V in Europe. View answer
Asked 6 ´years ago | Mirka Deros Dust-Free Sanding System with 18' Coaxial Vacuum Hose
What are the model numbers for the Mirka Dust-Free Sanding System components? Shipping cost to Seattle? View answer
Asked 7 ´years ago | Mirka Deros Dust-Free Sanding System with 18' Coaxial Vacuum Hose
I was looking for the dimensions of the router bit 56-510. Thank you. View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Mitered Door & Much More Router Bits
For routing black walnut pickup cavities, what’s the difference between 11-127B and 01-127B? Recommend a bit? View answer
Asked 7 ´years ago | Infinity Tools 1/4" Shank Mortise & Tenon Router Bits
Is your 'Inverted Ogee' (item #59-564) the same as a 'reverse ogee' bit? The website calls it 'Classic Ogee Router Bit - Large.' Is it the same? View answer
Asked 6 ´years ago | Infinity Tools 1/2" Shank Ogee Router Bits
What’s the width of the flat spot created by the Ovolo router bit? I need it less than 1/4" for a ribbed profile. View answer
Asked 6 ´years ago | Infinity Tools 1/2" Shank Ovolo Router Bits
How much space do I need to allow for the spacer or how much should my panel compress them on glue-up? View answer
Asked 6 ´years ago | Infinity Tools Entry & Passage Door Panel Spacers
Can I get just the contractor foam replacement plugs and not the foam twisty kind? View answer
Asked 7 ´years ago | Plugfones Replacement Earplugs
The 1/2" model’s adjustment xxxx feels loose, and the top cutter moves too slowly. Any fixes for this issue? View answer
Asked 8 ´years ago | Broca de ranurado de precisión con vástago de 1/2" de Infinity Tools
Can these straight edges be joined end-to-end? I want to combine a 24" and a 50" edge for stability on a 66" table. View answer
Asked 6 ´years ago | Infinity Tools 2" Wide Pro-Grip Straight Edge Clamps
I have Auto-Adjust Toggle Clamps; some black rubber tips split. Can you sell or advise where to get replacements? View answer
Asked 6 ´years ago | Infinity Tools Quick Release Toggle Clamps
Can the 00-555 rabbet kit be used in a handheld Bosch 1617 router safely? I’ve used smaller bits before and seek advice on results and safety. View answer
Asked 8 ´years ago | Infinity Tools 7-Pc. Rabbeting Router Bit Combo Kits, 1-3/8" Cutter Diameter
I need a flush trim bit that removes only 1/16” for adding a vinyl finish to a speaker door panel. Do you have a bit with such a bearing? View answer
Asked 5 ´years ago | Infinity Tools 1/4" Shank Rabbeting Router Bits
Can the 35-856 bit set cut 15/32" and 23/32" rabbets without a router table, or does it require one? View answer
Asked 8 ´years ago | Infinity Tools 1/4" Shank Rabbeting Router Bits
Is there a specification sheet for your rail and stile door bit sets showing cutter head dimensions? View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Matched Rail & Stile Router Bits w/ Setup Block
Can your rail and stile cutter sets work with other brands, or do I need to buy your specific bit set? View answer
Asked 5 ´years ago | Infinity Tools 1/2" Shank Matched Rail & Stile Router Bits w/ Setup Block
What does 'matched set' mean for the #91-505 Shaker 15 degree router bit set? Do they make perfect joints without shims? View answer
Do you have a panel cutter for 5.2mm plywood? I need it for a 15-degree shaper set. I have 1/4" and 5.5mm cutters. View answer
Asked 6 ´years ago | Infinity Tools Cabinet Door Rail & Stile Shaper Cutter Sets, 3/4" Bore
Does the 83-034 set come with a 5.5 mm slot cutter and bearing to match? View answer
Tips for setting the first bit on the 84-051 Rail & Stile Set to be centered? I know how to center subsequent bits. View answer
For item 83-507 on a shaper, which bearing is recommended? Do you need adjustments when switching from tongue to groove? View answer
I am needing a traditional cutter set to make interior doors. All I see on your site is Ogee. View answer
Asked 7 ´years ago | Infinity Tools Interior & Exterior Door 2-Piece Shaper Cutter Sets, 3/4" Bore
Can a backcutter attach to the Art Deco 3-piece raised panel set, or do I need a separate bit for 3/4” stock? View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Backcutter Router Bits
Can I swap the small bearing on the cove bit in the 3-piece raised panel set for a larger diameter bearing? View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Horizontal Raised Panel Router Bits
I need a router bit to make a raised panel fitting a 1/2" thickness. Any recommendations for a bit that will leave the right fit? View answer
I bought an Art Deco raised panel bit and now need the matching rail and stile bits. Can you guide me to the correct bits on your site? View answer
Asked 6 ´years ago | Infinity Tools 1/2" Shank Horizontal Raised Panel Router Bits
Can I use the 22.5 Shaker raised panel bit on 1/2” hardwood stock? I prefer the Shaker profile over the mini ogre. View answer
Item #90-604: How deep is the cove this bit produces? I want to craft cove siding with about a 1/4” depth. View answer
Asked 6 ´years ago | Infinity Tools 1/2" Shank Vertical Raised Panel Router Bits
For raised panel and glass doors, what's the most cost-effective cabinet door router bit set that uses the same rail and stile bits? View answer
Asked 8 ´years ago | Infinity Tools 1/2" Shank Vertical Raised Panel Router Bits
After you are through changing the bearing or cleaning the bit, how do you get the bit out of the device? View answer
Asked 6 ´years ago | Infinity Tools Router Bit Vise
I paid for the Miter Saw Station Plans but haven’t received them. I got the Kreg Tool R3 Pocket Hole System though. View answer
Asked 6 ´years ago | Mobile Miter Saw Station Plans
Which carbide tipped planer blades fit a Delta 22-560C benchtop planer? Also, do you have blades for the helical cutting 8” jointer KC-85FX? View answer
When adding edge banding, how do you remove all the tops? Is unscrewing required? View answer
Would the 27” x 29” Table Saw Router Table Package be compatible with the Delta 36-725 Table Saw? View answer
Asked 6 ´years ago | Infinity Tools Table Saw Router Table Package w/ 27" x 29" Table Top & 3.25HP Triton Router (TRA001)
Will this fit a Craftsman model 113.xxxxxx table saw? View answer
What router bits were used to create the first frame in your website's picture? It looks different from the video. View answer
Asked 6 ´years ago | Infinity Tools 1/2" Shank Picture & Frame Making Router Bits
Looking for an Ogee bit similar to the 56-517 profile in the American Woodworker book. Is this one yours? View answer
Asked 7 ´years ago | Infinity Tools 1/2" Shank Picture & Frame Making Router Bits
Do these bits have a lifetime warranty? View answer
Asked 5 ´years ago | Infinity Tools 1/2" Shank Picture & Frame Making Router Bits
I need blades for a 12" CKM jointer. Specs: 3/4" to 1" wide and 1/8" thick. Do you have suitable blades? View answer
Asked 7 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets
I need replacement knives for my Reliant Jointer model #dd39c. Old knives measure 1/8 × 6 1/6 × 5/8. Do you sell them? View answer
Do you sell blades for a Craftsman Professional Series planer model 351.217480? View answer
Asked 6 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets
Does Infinity offer sharpening services for blades, knives, chisels, etc.? If not, can you recommend one? View answer
I need HSS replacement knives for Robland XSD-31: 310mm x 25mm x 3mm. Can you recommend a part number? View answer
Do you carry a 4-blade set for a Boice Crane 3450 jointer? The HSSK-020 set is 3 blades. I need one with 4. View answer
Do you have jointer and planer blades for a Makita 2030 combination jointer-planer with blade slots for bolts? View answer
I need HSS planer knives: 36-1/2” long, 1-3/8” wide, 1/8” thick, 40-deg bevel, and 1/8” bevel surface. Set of 4. View answer
Infinity Cutting Tools Q&A