Question 1

Looking for planer knives, 1.25" tall, 30" long, .152" thick. If unavailable, can you direct me to a supplier? View answer

Asked 6 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 2

Do you have carbide replacement blades for a Sears Craftsman 8” Jointer-Planer-Molder MOD 306.23377? View answer

Asked 5 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 3

i would like to buy the blade setting tool for Rockwell 131/8" blades. View answer

Asked 7 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 4

Do you carry a 6 1/8 x 13/16 x 1/4" HSS knife? Would HSSK-015 fit a planer for this size knife? View answer

Asked 6 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 5

Which carbide tipped planer blades fit a Delta 22-560C benchtop planer? Also, do you have blades for the helical cutting 8” jointer KC-85FX? View answer

Asked 5 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 6

I didn't find a cert of calibration for the 100-069 iGaging set on your site. Do your tools come with one? View answer

Asked 7 ´years ago | iGaging 4R Rule

Question 7

Will the replacement blades you sell fit my 15-year-old Jesada rail and style shaper head? The current blades are too thin to sharpen. View answer

Asked 7 ´years ago | Infinity Tools Combination Rail & Stile Shaper Cutter, 1-1/4" Bore

Question 8

I need to build cabinet doors from 3/4 stock with a Grizzly G1035 shaper (3/4 spindle). What items do I need for stile, rail, and raised panel cutting? View answer

Asked 7 ´years ago | Infinity Tools Combination Rail & Stile Shaper Cutter, 1-1/4" Bore

Question 9

Is your cope and stick cutter head compatible with a Felder shaper with a 30mm spindle? Can you ship to Canada? View answer

Asked 7 ´years ago | Infinity Tools Combination Rail & Stile Shaper Cutter, 1-1/4" Bore

Question 10

Does the Professional Coping & Crosscut Sled with Auto-Adjust Clamps work with a Bosch router table? View answer

Asked 7 ´years ago | Infinity Tools Combination Rail & Stile Shaper Cutter, 1-1/4" Bore

Question 11

I need an insert cutter head for a Rockwell shaper with a 3/4" spindle to cut T&G in 2X6 material. Any suggestions? View answer

Asked 7 ´years ago | Infinity Tools Combination Rail & Stile Shaper Cutter, 1-1/4" Bore

Question 12

What is the part number for the stile cutter that matches the extended tenon cutter 84-eth? View answer

Asked 7 ´years ago | Infinity Tools Extended Tenon Shaper Cutter Sets, 1-1/4" Bore

Question 13

I lost the pad on my Irwin heavy-duty bar clamp. Do you sell replacement pads? View answer

Asked 6 ´years ago | Irwin Medium-Duty Bar Clamp

Question 14

I plan on purchasing a Kregg HD for 2x4 framing on a Home Bar.. What screws should I purchase ? View answer

Asked 7 ´years ago | Kreg Pocket-Hole Screw, 1-1/4", #7 Fine Maxi-Loc Head

Question 15

How do these bits compare to carbide spiral flush trim bits for figured woods like maple? Which avoids tearout? View answer

Asked 5 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 16

Can I remove the top bearing and use only the bottom one, or vice versa, with a 7/4 leg blank and a 3/4” plywood jig? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 17

Can the top bearing be removed so the bottom bearing guides the cut? Needed for thickness greater than the bit’s cutting height? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 18

Can I run the bit with either bearing removed for jointing stock over 2"? I want to use it as both a pattern and flush trim bit. View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 19

Will mega flush trim bits prevent tear out on end grain when template routing compared to a standard flush bit? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 20

Can your flush trim bits be sharpened for plywood trimming? Do you offer sharpening or should I use a sharpener? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 21

Where can I find instructions for setting up router bits in my router table for different stock sizes? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 22

Why should I use the 1-1/2" mega bits in a router table? Can the 3/4" bits not be used, or are there issues? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 23

For a mega flush trim bit, is the cutter height the distance between bearings? Is a 2 height good for 2 material? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 24

What’s the advantage of a 1.5" diam. mega flush trim router bit over a 3/4" diam. bit? I use a 3.25 hp router. View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 25

How can you tell if a router is running too fast or slow without specific speed settings? View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 26

miter lock router bits with a 1/4inch shank View answer

Asked 9 ´months ago | Sales, Support

Question 27

What are dimensions of base/sled & vertical face? Miter bar location on my router table & table saw differ a lot. View answer

Asked 9 ´months ago | Infinity Tools Professional Vertical Router Sled

Question 28

Can you use the mega flush trim bit with a 1 1/4" cutter height for a 1 1/2" thick round cutting board? View answer

Asked 9 ´months ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 29

A friend bought one - it had a UK plug on it - he had to convert it. Do yours have a standard North American plug? View answer

Asked 9 ´months ago | Triton Palm Belt Sander

Question 30

Do your lock miter bits allow for any gap for glue run out? View answer

Asked 9 ´months ago | Infinity Tools 1/2" Shank Lock Miter Router Bits

Question 31

Does this have a corresponding rub bushing? View answer

Asked 9 ´months ago | Infinity Tools Chamfer Shape-Up Shaper Cutters, 3/4" Bore

Question 32

Need UV protection for interior mounted wood blinds subject to sun damage. Which product is best please? View answer

Asked 9 ´months ago | General Finishes Satin Topcoat

Question 33

2 different bevel gauges shown - one black & the other SS with 1/4 - which one is it? View answer

Asked 9 ´months ago | Guía de calibre de bisel y centrado de 12" x 3" de iGaging

Question 34

What is the size of the baseplate? View answer

Asked 8 ´months ago | Infinity Tools Easy Angle Miter Jig

Question 35

I have a variable speed router but it is hard to access it so would like to do this remotely. Will this work View answer

Asked 8 ´months ago | Infinity Tools Router Speed Control 15 Amps

Question 36

how do you make speed adjustments on the triton after mounting? View answer

Asked 8 ´months ago | Support

Question 37

What size pin is included and are other sizes available for purchase? View answer

Asked 8 ´months ago | Infinity Tools Box Joint Jig For Router Table & Table Saw

Question 38

Will these work with the door sets such as 91-522? View answer

Asked 8 ´months ago | Infinity Tools Undersize Plywood Slot Cutter Kits For Rail & Stile Router Bits

Question 39

does the top of the fence have a standard T track View answer

Asked 8 ´months ago | Infinity Tools Standard Drill Press Fence

Question 40

Can the the Incra Miter 5000 be used on a left tilting Steel City cabinet saw? View answer

Asked 8 ´months ago | INCRA Miter 5000 Table Saw Crosscut Sled

Question 41

Will this work with a Festool 1400 router? View answer

Asked 8 ´months ago | Infinity Tools Precision Router Dado Jig

Question 42

How do you adjust the height of the router bit? View answer

Asked 7 ´months ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001) & Cast Iron Top

Question 43

What are the metric sizes? View answer

Asked 7 ´months ago | Big Gator V-Drill Guides

Question 44

I have router and Incra lift. Will my lift and plate fit? View answer

Asked 7 ´months ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 45

Are this food grade? View answer

Asked 7 ´months ago | Anti-Static PVC Dust Collection Hose, 10 Feet.

Question 46

What dimensions are the stones View answer

Asked 7 ´months ago | MPOWER SBS Triple Diamond Sharpening Stone Set – Side By Side

Question 47

Can one of the bearings be removed? Will the bit still work with only one bearing? View answer

Asked 7 ´months ago | Infinity Tools 1/2" Shank Solid Carbide Compression Double Bearing Pattern Router Bits

Question 48

Will this work in a horizontal position for resawing with a bandsaw and would the magnetic base hold it ? View answer

Asked 7 ´months ago | Infinity Tools Power Feeder Adapter Plate

Question 49

Does this just do 45 degree cuts or can you do 90 degree cuts as well? View answer

Asked 7 ´months ago | Infinity Tools Precision Miter Trimmer

Question 50

Does it come in different sizes View answer

Asked 7 ´months ago | Infinity Tools Sleeveless Sanding Drums

Browse by Topic

Tools