Question 1

For numbering a small turned part (e.g., 180), what is the combined length of three numbers? View answer

Asked 5 ´years ago | Infinity Tools 2" Number Set - Multi-Layer Inlay System 1

Question 2

What are the dimensions of the completed Sail Boat? Does the 7.5" base plate come with the template set? View answer

Asked 5 ´years ago | Infinity Tools Sailboat - Multi Layer Inlay System

Question 3

I'm looking for an electric branding iron with a small Cardinal bird and up to 2 lines of text. Can you make that? View answer

Asked 7 ´years ago

Question 4

I make chairs and want to brand them with "Classic Woody" in cursive print. Can you do that? View answer

Asked 7 ´years ago

Question 5

Is it possible to replace the "Hand Crafted" with "Custom Made"? View answer

Asked 6 ´years ago

Question 6

What are the thicknesses of your saws? I need to cut grooves in a fretboard for fretwire. View answer

Asked 6 ´years ago | Shark Corp. 5-Pc Master Woodworker's Saw Set

Question 7

What is the proper blade angle for sharpening a jointer plane (item 101-632)? I’m happy with the jack plane I bought. View answer

Asked 6 ´years ago | Infinity Tools Wood Jointer Hand Plane

Question 8

Does your 101-632 hand jointer plane operate like steel planes with a Norris style cut adjuster? View answer

Asked 5 ´years ago | Infinity Tools Wood Jointer Hand Plane

Question 9

Do Hurricane Blades work well on a table saw for cutting "green" lumber? I use a 7.5" blade for outdoor furniture. View answer

Asked 7 ´years ago

Question 10

Are you making this saw in different sizes? I need a blade for a cordless 6 1/2” circular saw. View answer

Asked 7 ´years ago

Question 11

What grits are the diamond stones in this sharpening package? View answer

Asked 6 ´years ago | Infinity Tools 5-pc. Diamond Stone Sharpening Package

Question 12

How many templates are in the Iris inlay set? Will my 1/8" cutter work with the set? View answer

Asked 5 ´years ago | Infinity Tools Iris - Multi-Layer Inlay System

Question 13

I purchased an iris inlay with no instructions. The butterfly was clear, but I need instructions for the iris. View answer

Asked 6 ´years ago | Infinity Tools Iris - Multi-Layer Inlay System

Question 14

I plan to use an inlay on a cutting board project. What is the maximum recommended thickness of the inlay material? View answer

Asked 7 ´years ago | Infinity Tools Mountain Sunset - Multi-Layer Inlay System

Question 15

Do you have a jig for precise mounting of Kreg concealed hinge doors, or are you considering developing one? View answer

Asked 7 ´years ago | Kreg Concealed Hinge Jig

Question 16

does this jig accomodate a 1/2 inch offset? View answer

Asked 5 ´years ago | Kreg Concealed Hinge Jig

Question 17

Do you offer custom template creation for multi-layer inlay systems from an uploaded image? View answer

Asked 7 ´years ago | Infinity Tools Yin Yang - Multi-Layer Inlay System

Question 18

Need Eagle Inlays for my grandson’s Eagle Scout award. Will a standard inlay bushing work with my DeWalt compact router? View answer

Asked 7 ´years ago | Infinity Tools 2" Letter Set - Multi-Layer Inlay System

Question 19

What solvent do you recommend for removing the glue residue from the templates? View answer

Asked 7 ´years ago | Infinity Tools 2" Letter Set - Multi-Layer Inlay System

Question 20

I have Trend router bushes (7.93mm & 14.28mm). Will they work with your MILS letter templates? Do you ship to England? View answer

Asked 6 ´years ago | Infinity Tools 2" Letter Set - Multi-Layer Inlay System

Question 21

Can I use thin veneers glued to a 1/8 inch backer board for inlays? View answer

Asked 5 ´years ago | Infinity Tools Bonsai - Multi-Layer Inlay System

Question 22

For the Bonsai multi-layer inlay, do you need both the inlay and accessory package, or just the inlay pattern? View answer

Asked 6 ´years ago | Infinity Tools Bonsai - Multi-Layer Inlay System

Question 23

Can I use 1/2" ebony for butterfly inlays in a 2" redwood slab with your system, which suggests 1/8" veneer in the video? View answer

Asked 7 ´years ago | Infinity Tools Nested Butterfly - Multi-Layer Inlay System

Question 24

Does the 100-190 positioning plate system include both 4.5" x 11.5" and 4.5" x 7" plates, or are they sold separately? View answer

Asked 6 ´years ago | Infinity Tools Positioning Plates for Multi-Layer Inlay Template System

Question 25

What are the diameters of the Narex Hand Stitched rotary rasps? Need one for smoothing small scroll saw cuts. View answer

Asked 5 ´years ago | Narex Hand Stitched Rotary Rasp

Question 26

What is the diameter of the shaft and what rotary speeds are recommended? View answer

Asked 7 ´years ago | Narex Hand Stitched Rotary Rasp

Question 27

Will Narex 00-726 rasps handle higher RPMs, or is there a high-speed rasp set for a Dremel? View answer

Asked 5 ´years ago | Narex Hand Stitched Rotary Rasp

Question 28

Can I buy the premium coping sled, cop block, and clamps together, or do I need to purchase each item separately? View answer

Asked 7 ´years ago | Bessey Auto Adjust Toggle Clamps

Question 29

Can this clamp be used on a jig that clamps material below the clamp base, like making tapered legs for furniture? View answer

Asked 6 ´years ago | Bessey Auto Adjust Toggle Clamps

Question 30

Will this template route an 8-1/4" opening to fit a 9-1/4" plate? View answer

Asked 5 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 31

Does the RTI-DIY template kit work with INCRA MagnaLOCK router plates and RTT-IRS rings? View answer

Asked 6 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 32

Does the router base template fit the Jessem Mast-R-Lift II RTL-003? Do you have one for RTL-002? View answer

Asked 6 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 33

Why can’t the optional 4-corner screws be used with the RTI-DIY router table kit? How does the side plunger work? View answer

Asked 7 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 34

Does the Infinity Tools D.I.Y. Router Template Package fit a Kreg 359063 Insert Plate Undrilled PRS4038? View answer

Asked 6 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 35

Will the RTI-DIY 5 pc. router insert plate template fit the Jessem Mast-R-Lift II without voids at the corners? View answer

Asked 6 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 36

Can I install a 47" extension table on my Ridgid table saw, or only the 29" extension? View answer

Asked 5 ´years ago | Infinity Tools Table Saw Router Table Package w/ 27" x 29" Table Top & 3.25HP Triton Router (TRA001)

Question 37

Can you pre-drill your router plate insert for a Bosch router and include a hole for the Bosch height adjustment tool? View answer

Asked 5 ´years ago | Infinity Tools Table Saw Router Table Package w/ 27" x 29" Table Top & 3.25HP Triton Router (TRA001)

Question 38

Is the table saw router table package available minus the router? I already own the MOF-001. (I like it a lot) View answer

Asked 5 ´years ago | Infinity Tools Table Saw Router Table Package w/ 27" x 29" Table Top & 3.25HP Triton Router (TRA001)

Question 39

Will this inlay kit work well and accurately with end grain material for making butcher blocks? View answer

Asked 5 ´years ago | Infinity Tools Multi-Layer Inlay System Accessory Package

Question 40

Can you make a custom router template of a walking bear? I think it looks more professional than a branding iron. View answer

Asked 5 ´years ago | Infinity Tools Multi Layer Inlay System - Hummingbird

Question 41

Need a replacement for a cracked fixed roller on a Grizzly GO444Z saw. Can fixed rollers be swapped for swivel ones? View answer

Asked 6 ´years ago | Shop Fox Bear Crawl Heavy-Duty Mobile Base

Question 42

I can't remove the original feather from my GuidePro extension. The allen wrench doesn’t fit. What should I use? View answer

Asked 6 ´years ago | BOW Products GuidePRO Resaw Featherboard for Bandsaws

Question 43

Looking to buy replacement feathers for 6 (#70014-01) and 10 (GP7) GuidePRO Band Saw Feed Guides. Do you sell them? View answer

Asked 6 ´years ago | BOW Products GuidePRO Resaw Featherboard for Bandsaws

Question 44

Is the 60” hose flexible enough for handheld routers and tight bends? What’s the smallest bend it can handle? View answer

Asked 6 ´years ago | Infinity Tools 3-Pc. Triton Router Dust Collection Package

Question 45

Is the Triton router adapter left-hand thread for the 3-piece dust collection package? View answer

Asked 6 ´years ago | Infinity Tools 3-Pc. Triton Router Dust Collection Package

Question 46

What are the ID and OD of the largest part of the T fitting for the Triton 3.25 router dust collection kit? Is it 4"? View answer

Asked 5 ´years ago | Infinity Tools 3-Pc. Triton Router Dust Collection Package

Question 47

Does this insert fit the makita 10" compound mitre saw model number ls1016? View answer

Asked 6 ´years ago | Wooster White China Bristle 2"

Question 48

Will this insert also fit the new Makita XSL06Z 36v cordless miter saw? If not do you plan on making one to fit? View answer

Asked 6 ´years ago | Wooster White China Bristle 2"

Question 49

Will the JessEm Rout-R-Lift Prestige fit a DeWalt DW618 router? I don't see my router base listed. View answer

Asked 7 ´years ago | JessEm Rout-R-Lift Prestige for Plunge Based Routers

Question 50

Will the Prestige work with an Elu 3338 type 2? View answer

Asked 6 ´years ago | JessEm Rout-R-Lift Prestige for Plunge Based Routers

Browse by Topic

Tools