Question 1

Looking for a finish for cedar tables to withstand food spills and heavy use. How does your finish perform with multiple coats? View answer

Asked 7 ´years ago | Odie's Oil Food Safe Wood Finish - 9 oz. Jar

Question 2

Is this oil safe for cutting boards and cheese boards? How food-safe is it? View answer

Asked 7 ´years ago | Odie's Oil Food Safe Wood Finish - 9 oz. Jar

Question 3

Should I switch to your oil, butter, or wax for a wood tabletop primed with half linseed oil and turpentine? View answer

Asked 6 ´years ago | Odie's Oil Food Safe Wood Finish - 9 oz. Jar

Question 4

Will this product add shine to unfinished cherry wood on a cutting board, and give a glossy effect? View answer

Asked 6 ´years ago | Odie's Oil Food Safe Wood Finish - 9 oz. Jar

Question 5

Please what's the difference between item 84-002. SX and item 84-002. DX? View answer

Asked 6 ´years ago | Infinity Tools Exterior Door Making Kit for Insert-Pro Shaper Cutter Sets, 1-1/4" Bore

Question 6

Where can I get replacement parts for my comet 2 View answer

Asked 6 ´years ago | Teknnatool Nova Comet II Midi Lathe; Variable Speed & Reversible

Question 7

I bought the Celtic Knot template. Is there a video or guide for proper use and flipping of the template? View answer

Asked 7 ´years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 8

What is the size of the smaller Celtic Knot Multi-Layer Inlay? The larger one is 12" x 12". What are the dimensions of the smaller one? View answer

Asked 8 ´years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 9

Are your hand planes European-made? Where are they manufactured, and are any components from China? View answer

Asked 7 ´years ago | Infinity Tools 4-Pc. Bench Plane Package

Question 10

Can I buy an additional head for an electric branding iron with my personal initials? How do I send my signature, and what’s the cost? View answer

Asked 7 ´years ago

Question 11

I wear a 17-17.5" collar and have a beard. What size Dust-Bee-Gone mask should I get for woodworking and construction dust? View answer

Asked 6 ´years ago | Dust Bee Gone Masks

Question 12

I bought the Celtic Knot but am confused about the order and rotation. Can you assist with this? View answer

Asked 7 ´years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 13

I want a branding iron with ZN initials, where Z and N are identical. Block style, thickness. Can you show examples? View answer

Asked 6 ´years ago

Question 14

can you make a banding iron with 2 initials with the dimensions 5/8" x 5/8" The initials are MM View answer

Asked 6 ´years ago

Question 15

For a custom branding iron (100-700C) with two text lines including “Hand Crafted by,” should I input the whole text or just John Doe? View answer

Asked 7 ´years ago

Question 16

Is this for just the tip or the whole iron? View answer

Asked 7 ´years ago

Question 17

What is the turn around time? Can we do this in cursive (my own writing?) View answer

Asked 6 ´years ago

Question 18

Will the 4" hose clamp go over 4 1 /2 " pipe or do I need a 5" clamp? View answer

Asked 7 ´years ago | Infinity Tools 4" Traditional Hose Clamp

Question 19

can i use Infinity Tools Router Table Insert Plate in a kreg router table View answer

Asked 6 ´years ago | Infinity Tools Aluminum Router Table Insert Plate, 9-1/4" x 11-3/4"

Question 20

I want to brand initials on fiddles. Can you make a brand the size of a quarter or 50 cent piece with my initials? View answer

Asked 8 ´years ago

Question 21

Will the lift you advertise fit the discontinued Porter Cable 7539 plunge router? View answer

Asked 7 ´years ago | Infinity Tools Aluminum Router Table Insert Plate, 9-1/4" x 11-3/4"

Question 22

Need a 10-inch diameter, 20-foot long clear flexible hose. Do you offer different sizes? View answer

Asked 6 ´years ago | Infinity Tools Urethane Dust Collection Hose, 2.5" x 10'

Question 23

Does the 10-Pc. TAB-LOCK Ring Insert Set include an insert for Porter Cable bushings? I have a Jessem router lift. View answer

Asked 7 ´years ago | Infinity Tools Aluminum Router Table Insert Plate, 9-1/4" x 11-3/4"

Question 24

How easily do urethane dust hoses and anti-static PVC hoses stretch over fittings? My clear wire hose is too tight. View answer

Asked 7 ´years ago | Infinity Tools Urethane Dust Collection Hose, 2.5" x 10'

Question 25

Will the Triton 3-1/4 router fit in a BenchDog BenchTop/Portable router table with 15" clearance? View answer

Asked 6 ´years ago | Infinity Tools Aluminum Router Table Insert Plate, 9-1/4" x 11-3/4"

Question 26

How many inches around are Medium, Large and Extra Large straps for Dust-bee-gone masks View answer

Asked 6 ´years ago | Dust Bee Gone Masks

Question 27

Header says w/ BOX. Don't see any box in the photos. Or is that the carboad packing box? View answer

Asked 7 ´years ago | Narex 7-Pc. Professional Screwdriver Set w/ Box

Question 28

I need a bearing with a 5/16 ID for a 1/16 groove bit. Does Infinity make a kit with a 5/16 ID bearing? View answer

Asked 6 ´years ago | Infinity Tools 16-Pc. Ultimate Router Bit Bearing Kit - 3/16" I.D.

Question 29

Hello. Do scrub planes have chip breakers? View answer

Asked 8 ´years ago | Infinity Tools Wood Scrub Hand Plane

Question 30

What size are the cap screws for the rabbit and trim bits? I would like to buy one bearing set for both. View answer

Asked 6 ´years ago | Infinity Tools 16-Pc. Ultimate Router Bit Bearing Kit - 3/16" I.D.

Question 31

What are the outside dimensions for this box? View answer

Asked 6 ´years ago | Infinity Tools Wooden Box for Mega Rabbeting Router Bit Set

Question 32

How does this same item fit both 20mm and 3/4" holes? is it a snug fit for 20mm and a sloppy fit for 3/4", or ??? View answer

Asked 7 ´years ago | BORA Self Adjusting In-Line Dog Clamp

Question 33

I need a replacement blade for an Ohio Tool 5-1/2 jack plane. Is the 101-631-BL 2-3/8” or 2-1/4” wide? View answer

Asked 7 ´years ago | Infinity Tools Wood Smoothing Hand Plane

Question 34

Can the 20 PC sharpening set with sandpaper be used with diamond or whetstones also. View answer

Asked 6 ´years ago | Infinity Tools 20-Pc. Chisel & Plane Blade Sandpaper Sharpening System

Question 35

Can I use a scrub blade in a smoother plane for rough work, despite the angle difference? View answer

Asked 7 ´years ago | Infinity Tools Wood Scrub Hand Plane

Question 36

On the 20-Pc. Chisel & Plane Blade Sandpaper Sharpening System (100-SSS), are there written instructions? View answer

Asked 7 ´years ago | Infinity Tools 20-Pc. Chisel & Plane Blade Sandpaper Sharpening System

Question 37

What is the lead time on shipping this item? View answer

Asked 6 ´years ago | Mirka Dust Extractor DE-1230-PC HEPA 120v

Question 38

Your pictures show an electric iron and a non-electric. How do I know which one I am ordering? View answer

Asked 6 ´years ago

Question 39

For an electric branding iron with curved text (e.g., Hand Crafted by), will it be one or two lines? Can I preview it before ordering? View answer

Asked 7 ´years ago

Question 40

Where are these planes made? View answer

Asked 6 ´years ago | Infinity Tools Wood Scrub Hand Plane

Question 41

Can I get this set with 20mm dog pegs instead of 3/4” at the same price, rather than buying 20mm pegs separately? View answer

Asked 6 ´years ago | BORA 6-Pc Auto-Adjust Dog Hole Clamp Master Pack

Question 42

Do I need to purchase the template guides separately or are they included with the multi-layer inlay system? View answer

Asked 7 ´years ago | Infinity Tools 4" Butterfly - Multi-Layer Inlay System

Question 43

Why did he go from 220 grit straight to the highest grit while sharpening. What are the in between grits for? View answer

Asked 5 ´years ago | Infinity Tools 20-Pc. Chisel & Plane Blade Sandpaper Sharpening System

Question 44

What is the lifespan of the electric branding iron, order turnaround time, and its dimensions? View answer

Asked 7 ´years ago

Question 45

Hi , Are these Narex 8-Pc. Palm Chisel Set sharp when they arrive? Thanks. View answer

Asked 6 ´years ago | Narex 8-Pc. Palm Chisel Set w/ Wooden Stand

Question 46

Do you carry hand-stitched round rasps and round machine cut rasps? I can't find them. View answer

Asked 6 ´years ago | Narex Premium Fine Cut Flat Rasp - 20mm

Question 47

can I use you templates with a whiteside router inlay kit? View answer

Asked 7 ´years ago | Infinity Tools Fleur De Lis - Multi-Layer Inlay System

Question 48

My son wants to add antennas to the butterfly on a bench project. Any tips for adding them after the fact? View answer

Asked 8 ´years ago | Infinity Tools 4" Butterfly - Multi-Layer Inlay System

Question 49

Is the Festool Kapex KS 120 zero clearance insert listing correct? Do I need one or two plates for a complete set? View answer

Asked 7 ´years ago | Infinity Tools Festool Kapex KS 120 Miter Saw Z.C.I.

Question 50

Total cut height? View answer

Asked 32 ´minutes ago | Infinity Tools 1/2" Shank Colonial Period Router Bit, Large Furniture Detail

Browse by Topic

Tools