Question 1

Will your plates fit Festool routers? View answer

Asked 5 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 2

Will the Universal base fit a Black & Decker model 7612 Type 1 router? View answer

Asked 7 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 3

Will this base work on an older Ryobi RE180PL1 tool, or will new mounting holes be needed? View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 4

Need a Universal Router plate with a 1-3/16” center hole and 1-3/8” counter-bore for Black & Decker RP250. Will it fit? View answer

Asked 7 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 5

Will the Universal 12" x 12" Router Base Plate (115-032) fit a TruePower 1800W Plunge Router (01-0147)? View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 6

My 12" Craftsman Band-saw has a 26.5" table. Will the fence attachment fit on a 36" straight edge clamp for my saw? View answer

Asked 7 ´years ago | Infinity Tools PRO-Grip Universal Fence Attachment

Question 7

I have reclaimed heart pine flooring and need to re-tongue & groove. Will this tool align with existing T&G? View answer

Asked 8 ´years ago | Infinity Tools Shape-Up Floor Making Shaper Cutter Set, 3/4" Bore

Question 8

Will the Pro-Grip Universal Fence Attachment work with a 12 1/2” x 14 1/16” table on my 12” Craftsman bandsaw? Is there a universal base available? View answer

Asked 7 ´years ago | Infinity Tools PRO-Grip Universal Fence Attachment

Question 9

Can you make shaper cutters for 1.25" decking material? I can plane 5/4 larch to 4/4 if needed. View answer

Asked 7 ´years ago | Infinity Tools Shape-Up Floor Making Shaper Cutter Set, 3/4" Bore

Question 10

I’m considering buying your 55-510 glue joint bit. Should I choose the 55-501 or bevel bit? What’s the difference? View answer

Asked 6 ´years ago | Juego de brocas para fresadora con unión encolada y biselada con vástago de 1/2" de Infinity Tools

Question 11

Hi, does the Lock Master Jig work with the Lock Mitre Shaper Cutter? View answer

Asked 7 ´years ago | Infinity Tools Shape-Up 45° Lock Miter Shaper Cutter, 3/4" Bore

Question 12

Can the full stack slot cutter be used in a handheld router? View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank Full Stack Slot-Cutter Set

Question 13

Can I use stacked 1/4 rabbet cutters for tall box joints, or do you have a pre-made solution? Height adjustments are a hassle. View answer

Asked 7 ´years ago | Infinity Tools Rabbeting Shape-Up Shaper Cutter

Question 14

Where can I find arbors for the 83-070 with a 3/4” spindle hole? I can't find anything that fits. View answer

Asked 7 ´years ago | Infinity Tools Rabbeting Shape-Up Shaper Cutter

Question 15

I have a Craftsman 12" bandsaw. Model #113.248210. The tabletop is 17.5 in long. Will this fit? View answer

Asked 6 ´years ago | Infinity Tools PRO-Grip Universal Fence Attachment

Question 16

Can you quote for an oval Branding Iron with "Hand Crafted By Duane Conrad"? View answer

Asked 7 ´years ago

Question 17

Will the Magswitch 2-Pc. Starter Kit w/ 18" Fence work on an old Delta shaper? The current fence doesn’t adjust properly. View answer

Asked 8 ´years ago | Magswitch 2-Pc. Starter Kit w/ 18" Fence Package

Question 18

What is the thickness of material i can use this on.Im making doors 1 1/8 thick and want 1/4 panel View answer

Asked 8 ´years ago | Infinity Tools Extended Tenon Shape-Up Shaper Cutter

Question 19

Is this backcutter compatible with the 90-511 Art Deco Raised Panel Bit? View answer

Asked 6 ´years ago | Infinity Tools Shape-Up Radius Backcutter Shaper Cutter, 3/4" Bore

Question 20

Shaper cutters need a 3/4” spindle. Can you advise where to find one or how to return the cutters if needed? View answer

Asked 7 ´years ago | Infinity Tools Shape-Up Radius Backcutter Shaper Cutter, 3/4" Bore

Question 21

What is the total length of the 101-039 5mm bit? I need a 5-inch long Brad point bit. View answer

Asked 7 ´years ago | Snappy #2 & #3 (5/64") Self Centering Bit

Question 22

Do you sell a 5/8" straight plug cutter as well as a 5/8" Forstner drill separately ( not in a Kit or set) View answer

Asked 6 ´years ago | Infinity Tools 8-Pc. Plug Cutter & Tenon Set - Straight & Tapered Styles

Question 23

How much panel gap do I allow for the space balls? View answer

Asked 7 ´years ago | Infinity Tools Space Balls 1/4"; 250 pack

Question 24

Where can I find PDFs for setting up the bit for different wood thicknesses? Mentioned in a finger joint video. View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank Box Joint Router Bit

Question 25

What is the recommended speed for this bit? Is 16,000-18,000 RPM correct? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Box Joint Router Bit

Question 26

How can I change the angle from 25 to 30 degrees with this system? View answer

Asked 7 ´years ago | MPOWER Diamond DeBurring Plate For PSS

Question 27

Will this bit work if both front, back, and sides of the drawer at 1/2" plywood? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Drawer Locking Router Bit

Question 28

Does the M-Power Fasttrack Sharpening System work for Flexcut carving tools, or do you have a similar system? View answer

Asked 7 ´years ago | MPOWER Diamond DeBurring Plate For PSS

Question 29

For using a bit, do I need to add extra stock to the drawer's total measurement, e.g., for a 20"x12" drawer? View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank Drawer Locking Router Bit

Question 30

Do you stock 7/16” and 7/8” bits for the 5-Pc. Extra Long Dowel & Plug Cutter Set? View answer

Asked 7 ´years ago | Infinity Tools 5-Pc. Extra Long Dowel & Plug Cutter Set

Question 31

How much extra material should be planned when cutting 3/4" thick stock with a 22.5° Lock Miter Bit Set? View answer

Asked 7 ´years ago | Infinity Tools 1/2" Shank 22.5° Lock Miter Router Bit Set w/ Setup Block

Question 32

I need a plug cutter with a drill bit mounted in the shaft for drilling holes in small dowels. Can you help with this? View answer

Asked 7 ´years ago | Infinity Tools 5-Pc. Extra Long Dowel & Plug Cutter Set

Question 33

Can I buy just the 3/4" bit from the plug cutter set 101-208? It's my favorite, but I don’t need the whole set. View answer

Asked 7 ´years ago | Infinity Tools 5-Pc. Extra Long Dowel & Plug Cutter Set

Question 34

Can I make multiple passes with a 3-1/4 HP router for a lock miter bit to cut 1 ply, or is there a better method? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Lock Miter Jr. Router Bit

Question 35

your templates are meant to cut the inside of the trays, and other items. How do you cut the outside edges please? View answer

Asked 7 ´years ago | Infinity Tools Flower Tray Template

Question 36

Hi. We drill the holes in jig to fit our own router. So it will adapt to any router, is that correct. View answer

Asked 6 ´years ago | Infinity Tools Fluting Jig For Straight & Arched Stock

Question 37

What size collet wrench is used in a SawStop in-line roter lift? View answer

Asked 6 ´years ago | Infinity Tools Router Collet Offset Wrench For Porter Cable 1-1/8"

Question 38

I need a collet wrench for a Central Machinery 91130 Router with a 7/8" nut. Do you have one that fits? View answer

Asked 6 ´years ago | Infinity Tools Router Collet Offset Wrench For Porter Cable 1-1/8"

Question 39

What is the "auxillary" output for? View answer

Asked 6 ´years ago | Caja de interruptor de vacío automático iVac

Question 40

Will this switch work with a Saw Stop? View answer

Asked 7 ´years ago | Caja de interruptor de vacío automático iVac

Question 41

Can the Ivac switch work on two circuits simultaneously? My Shop-Vac is on 20 amps and other devices on 15 amps. View answer

Asked 7 ´years ago | Caja de interruptor de vacío automático iVac

Question 42

The iVac Pro Switch page shows a 115V plug, but I need to confirm the 220V model has the correct 220V plug with horizontal blade. View answer

Asked 6 ´years ago | iVac Pro Switch; 240Vac; 20A

Question 43

Can two blast gates open simultaneously for a table saw’s base and guard dust collection while others stay closed? View answer

Asked 6 ´years ago | iVac Pro Switch; 240Vac; 20A

Question 44

How do you change the saw blade without removing the bag? View answer

Asked 7 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Question 45

Will it work with a four inch dust collector hose? View answer

Asked 7 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Question 46

Hi I have Freud lock miter router bit I need to know if lock miter master jigs work , with thank. , Oscar View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Lock Miter Jr. Router Bit

Question 47

Will this work with a Skil 3410? View answer

Asked 7 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Question 48

Will the Dust Cutter work with my Dewalt DW746 table saw? View answer

Asked 7 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Question 49

Will this unit fit DeWalt DWE7490,DWE7491 Heavy -Duty 10" Job Site Table Saws? Thanks. View answer

Asked 6 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Question 50

Does this work with a Ridgid TS2424 1? View answer

Asked 7 ´years ago | Milescraft Table Saw Dust Collector - Dust Cutter

Browse by Topic

Tools