Question 1

How can I upload my design for a custom branding iron (Item Number: 100-689C)? View answer

Asked 8 ´years ago

Question 2

Can I order the RTP-103 router package without the stand. If so what would the price be? View answer

Asked 8 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 3

Why are offset mortise and tenon bits hard to find? I want a tool for making cabinet doors without chiseling corners. View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank 3-Pc. Ultimate Glass Door Making Router Bit Set

Question 4

What speed do you recommend for an upcut sprial bit? View answer

Asked 8 ´years ago | Infinity Tools 1/4" Shank Solid Carbide Spiral Upcut Router Bits

Question 5

Do you have 1/2" profile width View answer

Asked 8 ´years ago | Infinity Tools Cabinet Door Rail & Stile Shaper Cutter Sets, 3/4" Bore

Question 6

Any bushings for 7/16" or 1/2"? View answer

Asked 8 ´years ago | Infinity Tools Self-Centering Dowel Jig

Question 7

Hello. Please, let me know if the item: RTL-003 is the Jessem Mast-R-Lift II 02120. Thank you. View answer

Asked 8 ´years ago | JessEm Mast-R-Lift II - 8-1/4" x 11-3/4" Aluminum Plate

Question 8

My son wants to add antennas to the butterfly on a bench project. Any tips for adding them after the fact? View answer

Asked 8 ´years ago | Infinity Tools 4" Butterfly - Multi-Layer Inlay System

Question 9

For raised panel and glass doors, what's the most cost-effective cabinet door router bit set that uses the same rail and stile bits? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Vertical Raised Panel Router Bits

Question 10

Does this router lift work the Elu mof 177/02 type 3 router View answer

Asked 8 ´years ago | JessEm Rout-R-Lift Prestige for Plunge Based Routers

Question 11

I have the 45 degree lock miter junior and will be using it on 3/4" plywood. What RPM should I use? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Lock Miter Jr. Router Bit

Question 12

Hi I have Freud lock miter router bit I need to know if lock miter master jigs work , with thank. , Oscar View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Lock Miter Jr. Router Bit

Question 13

Multi-Radius Router Bit w/ 3-Pc. Bearing Kit: Is this available with a 1/4" shank? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Multi-Radius Router Bit w/ 3-Pc. Bearing Kit

Question 14

Can I order the router table top alone? I have a damaged table top I need to replace. View answer

Asked 8 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 15

Recommended RPM for the 52-506 Mega Dado and Planer Router bit with a 3.5 HP router? Is 13,000 RPM suitable? View answer

Asked 8 ´years ago | Infinity Tools 1/4" Shank Dado Router Bit

Question 16

Wll this "Table Saw Setup & Sanding Disk Premium Package", work with my 10" SawStop Professional 3.0 hp.? View answer

Asked 8 ´years ago | Klingspor 10" Sanding Disk w/ 5/8" Arbor'

Question 17

Is the lens plastic or glass? View answer

Asked 8 ´years ago | Infinity Tools Magnifying LED Work Light With Dual Power & Dual Clamping

Question 18

Can I buy the premium coping sled, cop block, and clamps together, or do I need to purchase each item separately? View answer

Asked 8 ´years ago | Bessey Auto Adjust Toggle Clamps

Question 19

What panel thickness is the 91-527 Door Router Bit Set for? Can I adjust it for slightly undersized plywood panels? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Interior & Exterior Door Router Bit Set

Question 20

Best shaper bit set for a 12-lite exterior French door (1.375” thick)? I have a shaper and router table. View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Interior & Exterior Door Router Bit Set

Question 21

Can I add a rabbet bit to the Insert-pro extended tenon shaper cutters for window sash making, or use an insert collar? View answer

Asked 8 ´years ago | Infinity Tools 2-Pc. T-Bushing Set

Question 22

I have reclaimed heart pine flooring and need to re-tongue & groove. Will this tool align with existing T&G? View answer

Asked 8 ´years ago | Infinity Tools Shape-Up Floor Making Shaper Cutter Set, 3/4" Bore

Question 23

Is this table a solid 1 1/2 inch cast or is it hollowed out on the bottom View answer

Asked 8 ´years ago | Infinity Tools Cast Iron Router Table Top

Question 24

is this table solid 1.5 inch clear across or is it hollowed out on the bottom side View answer

Asked 8 ´years ago | Infinity Tools Cast Iron Router Table Top

Question 25

What's the length of the Narex 00-723 3 pieces fine rasp set (150mm, 200mm or 250mm)? View answer

Asked 8 ´years ago | Narex Premium Fine Cut Flat Rasp - 20mm

Question 26

Is this 6-Pc. Narex Premium Rasp Set fine cut? View answer

Asked 8 ´years ago | Narex 6-Pc. Premium Rasp Set

Question 27

Do you have Earlex Steam Generator For Wood Bending 230 volt? View answer

Asked 8 ´years ago | Earlex Steam Generator For Wood Bending

Question 28

Do you provide CNC info for router bits, like recommended feed rates or spindle speeds? View answer

Asked 8 ´years ago | Infinity Tools 1/4" Shank Roundnose Router Bits

Question 29

If you have the Micro Jig complete, do you need the deflector or the second handle? View answer

Asked 8 ´years ago | MicroJIG GRR-Ripper Complete Package

Question 30

My order price is in USD rigth and what i order it the item in the photo that show. View answer

Asked 8 ´years ago | Infinity Tools 20-Pc. Chisel & Plane Blade Sandpaper Sharpening System

Question 31

Will the Magswitch 2-Pc. Starter Kit w/ 18" Fence work on an old Delta shaper? The current fence doesn’t adjust properly. View answer

Asked 8 ´years ago | Magswitch 2-Pc. Starter Kit w/ 18" Fence Package

Question 32

Do you have a slot cutter that cuts a 1/16 inch wide slot? View answer

Asked 8 ´years ago | Infinity Tools Slot Cutter w/ 1/4" Shank Arbor

Question 33

Hello. Do scrub planes have chip breakers? View answer

Asked 8 ´years ago | Infinity Tools Wood Scrub Hand Plane

Question 34

What size hose is used for dust collection? View answer

Asked 8 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001) & Cast Iron Top

Question 35

Does the 06-690B Double Bearing Pattern Router Bit have two flutes or one? Are the edges carbide? View answer

Asked 8 ´years ago | Infinity Tools 1/4" Shank Double Bearing Pattern Router Bits

Question 36

I have a Delta 6"jointer model # 37-190. Which of these Knife jig should I order? View answer

Asked 8 ´years ago | Infinity Tools Planer & Jointer Knife Setting Jig - (Full Size Planers; Pair)

Question 37

If the surface is nonmetallic, how stable is this unit when it can't use the magnetic base? View answer

Asked 8 ´years ago | iGaging Multi-Purpose Digital Snap Gauge

Question 38

What’s the largest round stock I can safely use? I need three holes lined up for a wooden train. View answer

Asked 8 ´years ago | Infinity Tools Center Holding Jig For Drill Press

Question 39

Why can’t the optional 4-corner screws be used with the RTI-DIY router table kit? How does the side plunger work? View answer

Asked 8 ´years ago | Infinity Tools 5-Pc. Router Insert Plate Template Package

Question 40

Can you provide the size of your small butterfly? I need to buy a few for projects but need specific dimensions. View answer

Asked 8 ´years ago | Infinity Tools Small Monarch Butterfly - Multi-Layer Inlay System

Question 41

What is the "setup block" for the coping sled used for? I'm not sure it's function. Thanks View answer

Asked 8 ´years ago | Infinity Tools Pro Coping Sled

Question 42

How do you cut a long board (like 6’ long 2X4s) on an angle with a taper jig if it extends off the table? View answer

Asked 8 ´years ago | Infinity Tools Table Saw Taper Jig

Question 43

How do I increase depth for tenons with your extended tenon router, and cut panels after using the door set? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Interior & Exterior Door Router Bit Set

Question 44

Will old DeWalt 733 planer knives fit the new DeWalt 735 3-knife planer? View answer

Asked 8 ´years ago | Infinity Tools Carbide Tipped Knives For DeWalt 735 Planer - 3-Pc.

Question 45

Can your classical bead router bit work on a standard router for baseboard profiles? Is it suitable for table tops? View answer

Asked 8 ´years ago | Infinity Tools 1/2" Shank Classical Bead Router Bit

Question 46

how many keys are given and whars the range of the box joint sizes that can be made View answer

Asked 8 ´years ago | INCRA I-BOX - Box Joint Jig For Table Saw & Router Table

Question 47

Item no RTP 106 with motar all so or not View answer

Asked 8 ´years ago | Infinity Tools Pro Router Table Package with Cast Iron Top & JessEm Mast-R-Lift (02120)

Question 48

Is there a Tru-Cut Table Saw Insert System or other insert for a Jet Tablesaw JPS-10TS? View answer

Asked 8 ´years ago | Betterley Tru-Cut Insert System For Delta Right Tilt Unisaw

Question 49

What tools are available to cut 5/16" wide slots 1/2" deep? Is there a single head with a 1/4" shank bit? View answer

Asked 8 ´years ago | Infinity Tools 3-Wing Slot Cutter, 5/16" I.D. x 1-7/8" O.D.

Question 50

Do you have to replace your table saw measurement tape since your fence is now thicker? View answer

Asked 8 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Browse by Topic

Tools