Question 1

Is the Infinity Diamond Knife hone compatible with a Vevor 13" Model M1B-LS-3301? View answer

Asked 1 ´year ago | Infinity Tools Diamond Knife Hone For HSS & Carbide Planer & Jointer Knives

Question 2

Is the 3 1/2" dimension the inside or outside diameter of the 6 oz ramekins? Thanks! View answer

Asked 1 ´year ago | Infinity Tools Porcelain Ramekins 3-1/2" x 6 oz.

Question 3

Will this set cut 3/4" cabinet doors? View answer

Asked 10 ´months ago | Infinity Tools Insert-Pro Extended Tenon Shaper Cutter Sets, 1-1/4" Bore

Question 4

What are the full dimensions, specifically the edge leg? View answer

Asked 10 ´months ago | Infinity Tools 2" Pocket Saddle T-Square

Question 5

Signature? There's no way to upload a signature for infinity branding iron. View answer

Asked 1 ´year ago | Infinity Tools Signature Branding Iron

Question 6

Would this hold a 1/4hp power feeder down? View answer

Asked 10 ´months ago | Infinity Tools Magnetic Base for Mini Power Feeder

Question 7

Should I use a coping sled on my shaper with the cabinet cutter for several doors? View answer

Asked 1 ´year ago | Infinity Tools 3-Pc. Cabinet Door Making Shaper Cutter Sets w/ Combo Rail & Stile Cutter, 3/4" Bore

Question 8

Which tool stand, HDTS-001 or HDTS-002, supports the cast iron router table extension? View answer

Asked 1 ´year ago | Infinity Tools Cast Iron Router Table Extension Wings, Pair

Question 9

Does it come in a box? View answer

Asked 10 ´months ago | Infinity Tools 1/2" shank 6-Pc. Master Frame Making Router Bit Set

Question 10

Is it possible to sharpen the Infinity Tools 1/2" Shank Dado Router Bit? View answer

Asked 1 ´year ago | Infinity Tools 1/2" Shank Dado Router Bit

Question 11

Will this Infinity Tools Z.C.I. Plate for DW709 fit a Dewalt DWS780 saw? View answer

Asked 1 ´year ago | Infinity Tools Zero Clearance Insert (Z.C.I.) Plate for DeWalt 12" DW709

Question 12

Does the Narex Premium Hand Stitched Rasp have right or left handed patern? View answer

Asked 1 ´year ago | Narex Premium Half Round Hand Stitched Rasps

Question 13

Is it possible to sharpen the Infinity Tools miter knife replacement? View answer

Asked 2 ´years ago | Infinity Tools Replacement Knife for Insert-Pro Lock Miter Shaper Cutter

Question 14

How do I adjust the angle on the Deulen planer blade sharpener for different bevels? View answer

Asked 2 ´years ago | Deulen Jointer Knives Sharpening Jig

Question 15

What comes with the JessEm table saw guides in the box? View answer

Asked 2 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 16

Can the 1/4 dado router bit be used with solid wood like Maple and White Oak? View answer

Asked 2 ´years ago | Infinity Tools 1/4" Shank 3-Pc. Plywood Dado Router Bit Set

Question 17

What machines is it for? Table saw? View answer

Asked 9 ´months ago | JessEm Micro Adjuster

Question 18

What is it made of SS, plastic, painted steel...? View answer

Asked 9 ´months ago | iGaging 12" x 3" Bevel & Center Finding Gauge Guide

Question 19

What are the dimensions of the power feeder magnetic base? View answer

Asked 2 ´years ago | Infinity Tools Magnetic Base for Mini Power Feeder

Question 20

What is the kerf width on the multi material saw blade View answer

Asked 2 ´years ago | Infinity Tools 10" x 80T Multi-Material Saw Blade 5/8" Bore

Question 21

What is the plate thickness of these Infinity Tools 10" bench saw blades? View answer

Asked 2 ´years ago | Infinity Tools 10" x 50T Combination Tablesaw Blades, 5/8" Bore

Question 22

How do you install the included splitter? View answer

Asked 9 ´months ago | Infinity Tools 10" Laser Kerf Saw Blade & Splitter, 5/8" Arbor

Question 23

Will the Infinity precision trimmer blade pair fit the Pootatuck trimmer? View answer

Asked 2 ´years ago | Infinity Tools Precision Miter Trimmer Replacement Blades, Pair

Question 24

I have a delta cabinet makers saw with a bessemer fence will these fit it? And I need a kerf splitter also View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 25

I will like to know if the Clear Cut stoke guides could be used in a Incra fence View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 26

How long is the craftsmn rigid 7/16" insert? View answer

Asked 9 ´months ago | Betterly Tru-Cut Zero Clearance Tablesaw Insert System

Question 27

I have an incra tablesaw fence Q. JessEm will work on my tablesaw View answer

Asked 8 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 28

Can Jessem Clear Cut Tablesaw Stock Guides be attached to a Delta Unifense? Is there a mounting kit? View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 29

will the mpower flat lying tremmel set (sku 100-094) fit the 24 inch stainless ruler (sku 100-067)? View answer

Asked 9 ´months ago | MPOWER Flat Lying Trammel Set - Tri Scribes

Question 30

will this kit fit the Makita 3x21 belt sander mod. 9903 or the Dewalt 5 inch random orbital sander DWE6423? View answer

Asked 9 ´months ago | Infinity Tools Quick-Snap Small Tools Dust Collection Kit with Flex Adaptors and 16' Hose

Question 31

Can a single JessEm Clear Cut Table Stock Guide be ordered instead of a pair? How would I order just one? View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 32

Is the mounting bracket compatible with a Vega Utility fence on a mid-1980s 10" Delta Contractor Saw? View answer

Asked 8 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 33

It appears that the cutter angle, or slope angle, is set at 8 or 9º. I assume that is fixed. I like the 14º angle View answer

Asked 9 ´months ago | Leigh D4R Pro Dovetail Jig

Question 34

Will this new arbor nut fit the SKIL TS6307-00 10" Jobsite Table Saw? View answer

Asked 9 ´months ago | Infinity Tools SuperNut Table Saw Arbor Nut, For Standard 5/8"–12 TPI Acme-Threaded Arbors Only

Question 35

Will Jessum stock guides fit my SawStop Contractor table saw? Is there a mounting adapter available if not? View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 36

What are the dimensions of your stock guide? I have a Rigid R4513 saw with a 2? wide fence. Will it fit my jig? View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 37

Do the blast gates need to be plugged in? View answer

Asked 9 ´months ago | iVac 7-Pc. Auto Dust Collection Pack with VAC Switch

Question 38

I an using a 510 shopsmith with the new wider fence, will this work on this fence? View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 39

have a ridged ts3650 and fence is only 2" wide will this work View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 40

Can the dust collector be activated with a handheld remote for shop cleanup? View answer

Asked 9 ´months ago | iVac 8-Pc. Auto Dust Collection w/ Contactor

Question 41

I OWN A SEARS CABINET SAW, WILL THIS WORK ON MY FENCE? View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 42

Will this fit a Delta Contractors saw? View answer

Asked 9 ´months ago | Infinity Tools SuperNut Table Saw Arbor Nut, For Standard 5/8"–12 TPI Acme-Threaded Arbors Only

Question 43

Compatability View answer

Asked 9 ´months ago | Infinity Tools SuperNut Table Saw Arbor Nut, For Standard 5/8"–12 TPI Acme-Threaded Arbors Only

Question 44

What's thinnest cut 8" dadonator makes?I'm also looking at the 080-250. View answer

Asked 9 ´months ago | Infinity Tools Dadonator 8" Master Dado Saw Blade Package, 5/8" Bore

Question 45

Can someone advise if the JESSEM table saw guide system will fit on a jobsite table saw View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 46

Will these table saw stock guides meet OSHA requirements for antikickback paws? View answer

Asked 8 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 47

Will an Xacta II micro adjust fence fit my Jet 10? table saw as is, or will modifications be needed? View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 48

What kind of push stick do you use to get past these guides when ripping narrow pieces of wood? Thanks. View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 49

The front guide bar blocks push stick access. How can I address this for cuts between rollers and fence? View answer

Asked 7 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 50

Do lock miter setup jigs work with lock miter shaper cutters or only with router bit versions? Thanks! View answer

Asked 7 ´years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Browse by Topic

Tools