Question 1

What is the ID of this fitting? View answer

Asked 6 ´years ago | Infinity Tools 4" Threaded Splice

Question 2

For a vacuum bag switch, do I need a valve to start the vacuum when PSI drops below a certain level? View answer

Asked 6 ´years ago | Venturi Vacuum System

Question 3

I lost spring #TRA379 while shifting modes. Can I order just the spring or a subassembly with it? View answer

Asked 6 ´years ago | Triton 2-1/4 HP (1400w) Dual Mode Plunge Router (MOF001)

Question 4

I'm looking for a guide bearing, ID 3/16, OD 1-1/4 or 1-3/8. Do you sell them individually or only in sets? View answer

Asked 6 ´years ago | Infinity Tools 7-Pc. Rabbeting Bit Bearing Kit, 3/16" I.D.

Question 5

How long are the centering pins on the Base Plate Self-Centering Kit With Roller Bearings (115-039) View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 6

I bought a 1 1/2" flattening router bit (52-504). Can you tell me what speed this bit is rated for? View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Dado Router Bit

Question 7

I love my track saw! Can I buy just 1/2 inch router bearings separately? I need them for my bits and router collet. View answer

Asked 6 ´years ago | Infinity Tools 33-Pc. Router Bit Bearing Emergency Kit

Question 8

what is the plate thickness 012-190 90t miter saw blade View answer

Asked 6 ´years ago | Infinity Tools 12" Miter Saw Blade

Question 9

Hi, will the JessEm Clearcut guides work with Bosch RA1181 router table with 5" high fence? View answer

Asked 6 ´years ago | JessEm Clear-Cut Router Table Stock Guides

Question 10

Do you sell the attachment set (stops, tape) without rails? Interested in using Woodpecker rails and additional stops. View answer

Asked 6 ´years ago | Infinity Tools 96" Professional Miter Saw Fence System

Question 11

is it possible to purchase the slot cutters and a bit without the cope and cutters? View answer

Asked 6 ´years ago | Infinity Tools Plywood Slot Cutter Router Bit

Question 12

Can I attach the fence directly to my portable miter saw’s existing fences, or do I need a work station? View answer

Asked 6 ´years ago | Infinity Tools 96" Professional Miter Saw Fence System

Question 13

Can the handheld remote control two dust collectors? I need options for 16 tools. Can multiple systems run without signal issues? View answer

Asked 6 ´years ago | iVac 5-Pc. Auto Dust Collection Pack w/ 115 VAC Switch

Question 14

Will my 2-1/4 HP router handle the Sr lock miter bit for 1” MDF? What speed should I use? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Lock Miter Jr. Router Bit

Question 15

Is your BR-114 bearing rated for 35,000 RPM? It has a retainer xxxx , not a pressed fit. View answer

Asked 6 ´years ago | Infinity Tools 3/16" x 3/8" Bearing

Question 16

I have a Diablo DR42104 Flush Trim Bit. I need a 1” I.D. bearing. The shaft seems slightly under 3/16”. Do you have it? View answer

Asked 6 ´years ago | Infinity Tools 16-Pc. Ultimate Router Bit Bearing Kit - 3/16" I.D.

Question 17

How thick are your adhesive measuring tapes and what material? Do you sell extra mounting hardware? View answer

Asked 6 ´years ago | Infinity Tools 96" Professional Miter Saw Fence System

Question 18

What size are the cap screws for the rabbit and trim bits? I would like to buy one bearing set for both. View answer

Asked 6 ´years ago | Infinity Tools 16-Pc. Ultimate Router Bit Bearing Kit - 3/16" I.D.

Question 19

What’s the size hole in the 60 tooth 165 mm blade I bought? I got the Triton track kit and 59" extension. View answer

Asked 6 ´years ago | Triton Plunge Track Saw

Question 20

Hi. I am looking for a quick change chuck for my dewalt dwp-611 router. Will this product fit? View answer

Asked 6 ´years ago | Infinity Tools Eliminator Quick Change Router Chucks

Question 21

Do you have a router chuck and collar for a Craftsman model 2767 that fits 1/2? and 1/4? bits? View answer

Asked 6 ´years ago | Infinity Tools Eliminator Quick Change Router Chucks

Question 22

What thread configuration are your urethane and PVC hoses? I need to match them with my dust collection system fittings. View answer

Asked 6 ´years ago | Infinity Tools 4" Threaded Splice

Question 23

For your collet extreme extension what height is added. View answer

Asked 6 ´years ago | Infinity Tools Eliminator Quick Change Router Chucks

Question 24

Will the PRO-GRIP 2" x 24" Straight Edge Clamp fit my 24" Bandsaw table? I need a fence system for accurate cuts. View answer

Asked 6 ´years ago | Abrazaderas de borde recto Pro-Grip de 2" de ancho de Infinity Tools

Question 25

Will the tool work efficiently at 6 and 10 degrees for stool leg installations, even without dedicated stops? View answer

Asked 6 ´years ago | Milescraft Drill Mate Portable Drill Guide

Question 26

What is the minimum router horsepower required to use this cutter? View answer

Asked 6 ´years ago | Infinity Tools Insert-Pro 45° Lock Miter Shaper Cutter, 1-1/4" Bore

Question 27

Will this fit onto my Laguna 14/12 ? View answer

Asked 6 ´years ago | Kreg Precision Band Saw Fence

Question 28

How long is the warranty on the power feeder? View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 29

Can this mini feeder be used on a jointer View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 30

Will the Plycore router top fit my Benchdog 40-037 table? Can I use my existing router lift plate with it? View answer

Asked 6 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 31

How does the feeder attach to a SawStop table or extension? What is the maximum support arm extension in inches? View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 32

Will this fit a hitachi km12vc router View answer

Asked 6 ´years ago | JessEm Rout-R-Lift II

Question 33

Will your new small feeder work with a Shop Fox 2HP shaper and include a jig for top mounting? View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 34

Can the mini power feeder be used on a tablesaw for ripping? View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 35

I have a Laguna 18" bandsaw that requires a blade 145" long. Do you sell non-stock lengths for bandsaw blades? View answer

Asked 6 ´years ago | Infinity Tools Resaw Bandsaw Blades

Question 36

Will the Big GULP Dust Hood 115-351 fix my Rigid Table S aw Model TS24121, Ser# O122OPO164? View answer

Asked 6 ´years ago | Infinity Tools Big Gulp Dust Hood

Question 37

Will this coping sled work with an Incra fence system? Will the visor fit or is it too tall? View answer

Asked 6 ´years ago | Infinity Tools Pro Coping Sled

Question 38

Hi - Will JessEm Rout-R-Lift II fit in Kreg PRS2100? Thanks View answer

Asked 6 ´years ago | JessEm Rout-R-Lift II

Question 39

Im interested in the V tongue and groove router bit set 61-504. Does this set have carbide cutters? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Floor Making Router Bit Sets

Question 40

what is the dry time of Georgian Cherry Gel Stain (oil based) needed prior to applying poly finish? View answer

Asked 6 ´years ago | General Finishes Gel Stains, Georgian Cherry

Question 41

Do you have 160" resaw blades available View answer

Asked 6 ´years ago | Infinity Tools Resaw Bandsaw Blades

Question 42

Will using a dovetail bit in my jig for sliding dovetails work, given its clearances? I’ll finish the tails on my router table. View answer

Asked 6 ´years ago | Infinity Tools Precision Router Dado Jig

Question 43

What's the basic difference between interior doors and exterior doors with respect to cutters View answer

Asked 6 ´years ago | Infinity Tools Insert-Pro Interior & Exterior Door Making Master System

Question 44

Do you have a quick-change chuck for Milwaukee routers model 5616-24 and 5625-20? Where can I buy one? View answer

Asked 6 ´years ago | Infinity Tools Eliminator Quick Change Router Chucks

Question 45

Do you carry replacement hand planer knives for a Chicago Electric 4" planer? The planer item number is #45376 View answer

Asked 6 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 46

Will this sharpen my delta 13 inch planner blades View answer

Asked 6 ´years ago | Deulen 6" Jointer Knife Sharpener - For Knives Up To 8" Long

Question 47

I have a ryobi 18-1 volt palm router will your base plates pre drilled holes fit this router. View answer

Asked 6 ´years ago | Infinity Tools Universal D-Handle Router Base Plate For Compact Routers

Question 48

Product says clamps work from 3/4? to 2? thick. Can this coping sled be used with stock thinner than 3/4?? View answer

Asked 6 ´years ago | Infinity Tools Pro Coping Sled

Question 49

what diameter router motor will fit into this lift? Is there a lift available for a 4.2" diameter router motor? View answer

Asked 6 ´years ago | JessEm Rout-R-Lift II

Question 50

I want to use a Mega Dato Cutter for a 1mm plunge with a raised section. Can you specify the diameter of the raised section? View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Dado Router Bit

Browse by Topic

Tools