Question 1

Does the aluminum insert plate fit older tables and can it be purchased separately? Is it a good upgrade? View answer

Answer posted 7 years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 2

How much extra material should be planned when cutting 3/4" thick stock with a 22.5° Lock Miter Bit Set? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank 22.5° Lock Miter Router Bit Set w/ Setup Block

Question 3

Where is the Dadonator made? View answer

Answer posted 7 years ago | Infinity Tools Dadonator Jr., 6" Stacked Dado Saw Blade Set, 5/8" Bore

Question 4

Does this work on carbide blades? View answer

Answer posted 7 years ago | Deulen 6" Jointer Knife Sharpener - For Knives Up To 8" Long

Question 5

My iGaging Angle Cube only reads zero. Is there a reset needed to fix this issue? View answer

Answer posted 7 years ago | iGaging Angle Cube Digital Angle Guide

Question 6

size? View answer

Answer posted 7 years ago | Two-Sided Mobile Clamp Rack Plans

Question 7

Is the plate thickness of the 010-045 thin kerf blade suitable for my Skilsaw worm-drive contractor saw, which requires a minimum of 0.088”? View answer

Answer posted 7 years ago | Infinity Tools 10" Super General Combination Table Saw Blade

Question 8

Which Rosette Cutter is shown on page 51 of your flyer? Which bead bit is paired with it for straight cuts? View answer

Answer posted 7 years ago | Infinity Tools Carbide Tipped Rosette Cutters, 2-3/4"" Diameter

Question 9

Where are the 10" Super General thin kerf blades manufactured? View answer

Answer posted 7 years ago | Infinity Tools 10" Super General Combination Table Saw Blade

Question 10

I would like to know if the table is all phenolic. View answer

Answer posted 7 years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 11

What is the rail/stile slot width for your bit set? I need to match acrylic panels for cabinet doors. View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Matched Rail & Stile Router Bits

Question 12

Will your setup master jig work with a Freud lock miter shaper cutter? View answer

Answer posted 7 years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 13

I use a lot of baltic birch plywood for drawers. Does the Lock Miter bits produce excessive tear-out issues? View answer

Answer posted 7 years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 14

hello I am looking for planer blades for a Powermatic 412 View answer

Answer posted 7 years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 15

I bought a Triton 3 1/4 hp router. Need help finding a quality lift table insert. Thanks for your assistance. View answer

Answer posted 7 years ago | JessEm Mast-R-Lift II - 8-1/4" x 11-3/4" Aluminum Plate

Question 16

I’m looking at a spray booth for a big project. Are there vents at the bottom? Can it adapt to a low airflow box fan? View answer

Answer posted 7 years ago | HomeRight Portable Spray Booths

Question 17

Shaper cutters need a 3/4” spindle. Can you advise where to find one or how to return the cutters if needed? View answer

Answer posted 7 years ago | Infinity Tools Shape-Up Radius Backcutter Shaper Cutter, 3/4" Bore

Question 18

Are the sanding disks aluminum oxide? Do you sell a gizmo for fine-tuning a table saw using a caliper? View answer

Answer posted 7 years ago | Klingspor 10" Sanding Disk w/ 5/8" Arbor'

Question 19

Where can I find arbors for the 83-070 with a 3/4” spindle hole? I can't find anything that fits. View answer

Answer posted 7 years ago | Infinity Tools Rabbeting Shape-Up Shaper Cutter

Question 20

For Ivac systems, what’s the solution for 3-phase tools? How can I make the system compatible with my setup? View answer

Answer posted 7 years ago | iVac Contactor; 115Vac Trigger; 10HP Capacity

Question 21

Will this fit the rockleer router table without modification View answer

Answer posted 7 years ago | JessEm Rout-R-Lift II

Question 22

What is the total thickness of the football tray, and how should I attach the laces to the wood? View answer

Answer posted 7 years ago | Infinity Tools Football Tray Template

Question 23

Are these made in the USA? View answer

Answer posted 7 years ago | Narex Premium Hand Stitched Rasp

Question 24

the dragonfly inlay template appears to be able to make 3 different sizes of dragonfly, how is this done? View answer

Answer posted 7 years ago | Infinity Tools Dragonfly - Multi-Layer Inlay System

Question 25

It would be helpful to know the size of the inlays to determine if they are appropriate for the project. View answer

Answer posted 7 years ago | Infinity Tools Light House - Multi-Layer Inlay System

Question 26

Do you sell longer lengths of your Anti-Static PVC Dust Collection Hoses? View answer

Answer posted 7 years ago | Anti-Static PVC Dust Collection Hose, 10 Feet.

Question 27

How much does an electric branding iron with my signature cost? How do I submit my signature for customization? View answer

Answer posted 7 years ago

Question 28

Do you have frame making router bits with an 8mm shank View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Picture & Frame Making Router Bits

Question 29

What is height and width of completed tree ? View answer

Answer posted 7 years ago | Infinity Tools Bonsai - Multi-Layer Inlay System

Question 30

When you buy a plane is the blade already sharpen. View answer

Answer posted 7 years ago | Infinity Tools Wood Scrub Hand Plane

Question 31

Do the wooden skewed rabbit planes have a nicker for slicing into the corner against the wall of the rabbit? View answer

Answer posted 7 years ago | Infinity Tools Double Rabbet Wood Hand Plane

Question 32

I bought the Celtic Knot but am confused about the order and rotation. Can you assist with this? View answer

Answer posted 7 years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 33

I?m new to dado blades. With the MDS-PK2 set, does expanding it require specifying a particular mating blade? View answer

Answer posted 7 years ago | MicroJIG MATCHFIT Dado Stop

Question 34

Do you sell these products in The Netherlands? View answer

Answer posted 7 years ago | BORA 6-Pc Auto-Adjust Dog Hole Clamp Master Pack

Question 35

What type of sandpaper is it? View answer

Answer posted 7 years ago | Deulen Six Pack Sandpaper For Lapping Plate

Question 36

Can I use item 23-GLS with item 00-102 to build a cabinet door with glass that has a curved top rail? View answer

Answer posted 7 years ago | Infinity Tools Divided Light Door Kit For Rail & Stile Router Bit Sets

Question 37

Can the 03-500 router bit round over 3/4" stock without leaving square cuts, or is there a better bit for a full radius? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Thumbnail Router Bit

Question 38

Will this work with birch plywood that is slightly less than 3/4 inch? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Drawer Locking Router Bit

Question 39

What is the difference between the BJJ-002 and the BJJ-003 set? Do either come with the hinge attachment? View answer

Answer posted 7 years ago | Incra I-BOX - Box Joint Jig with Infinity Tools 3-Pc. Flat Top Blade Package

Question 40

What size are the wood boards for 100-195? View answer

Answer posted 7 years ago | Infinity Tools 20-Pc. Assorted Wood Pack

Question 41

Are you making this saw in different sizes? I need a blade for a cordless 6 1/2” circular saw. View answer

Answer posted 7 years ago

Question 42

What is the bevel angle of the Narex Dovetail Chisels? View answer

Answer posted 7 years ago | Narex Dovetail Chisel, 1/2"

Question 43

Can I use this blade on a circular saw? View answer

Answer posted 7 years ago | Infinity Tools 10" Laser Kerf Saw Blade & Splitter, 5/8" Arbor

Question 44

Looking at the 00-520. Also need a Rosette Cutter up to 50mm in diameter. Can you help? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank 3-Pc. Mini Door Making Router Bit Set

Question 45

Can the full stack slot cutter be used in a handheld router? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Full Stack Slot-Cutter Set

Question 46

I love the Bosch miter saw zero clearance insert. Can you make one for my Craftsman table saw, model #JT2504RC (dimensions: .345 x 4.165 x 13.835)? View answer

Answer posted 7 years ago | Betterley Tru-Cut Insert System For Delta Right Tilt Unisaw

Question 47

How many templates for the Celtic knot inlay? View answer

Answer posted 7 years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 48

Can a backcutter attach to the Art Deco 3-piece raised panel set, or do I need a separate bit for 3/4” stock? View answer

Answer posted 7 years ago | Infinity Tools 1/2" Shank Backcutter Router Bits

Question 49

What wood is used for the body on these planes? View answer

Answer posted 7 years ago | Infinity Tools 4-Pc. Bench Plane Package

Question 50

Will the iVac system work with a SawStop saw? If the saw is off but power is on, will it trigger the vacuum? View answer

Answer posted 7 years ago | iVac 4-Pc. Auto Dust Collection Pack w/ 115 VAC Switch

Browse by Topic

Tools