Question 1

What is the minimum size of the material that the set will work with? View answer

Asked 2 ´days ago | Guías de radio de esquina Kreg

Question 2

It looks like a large portion of the back blade is unfinished. Can this portion be flattened if needed in time? View answer

Asked 4 ´days ago | Narex Dovetail Chisels

Question 3

I see that you can remove either bearing -- excellent. Any reason I couldn't use these bits to do a plunge cut? View answer

Asked 5 ´days ago | Infinity Tools 1/2" Shank Mega Flush Trim Router Bits

Question 4

What is the overall length of the chisels? View answer

Asked 8 ´days ago | Narex Wood Line Imperial Bench Chisels

Question 5

Are the lock miter bits compatible for plywood? View answer

Asked 9 ´days ago | Infinity Tools 1/2" Shank 4-Pc. Master Lock-Miter Bit & Setup Jig Package

Question 6

Clamps for Quick-Snap 5-Piece Dust Collection Flex Adaptors View answer

Asked 10 ´days ago | Support

Question 7

What are the dimensions of this table? View answer

Asked 10 ´days ago | JessEm Ultimate Excel II Package

Question 8

What is the diameter (OD/ID) of the included hose? View answer

Asked 12 ´days ago | Venturi Vacuum System w/Vacuum Gauge & Fitting

Question 9

I need plunge capability following a template on top of the material. Can the lower bearing be temporarily removed? View answer

Asked 15 ´days ago | Infinity Tools 3-Pc. 1/4" Shank mini-Mega Flush Trim Router Bit Set

Question 10

Are the groves and dados using MatchFit dovetail? View answer

Asked 15 ´days ago | Infinity Tools Multi-Function Work Top (Top Only)

Question 11

Is the ID 4”? View answer

Asked 16 ´days ago | Infinity Tools 4"-45° Elbow

Question 12

are these clamps sold as singles or in pairs? View answer

Asked 17 ´days ago | Dubuque Handscrew Clamps

Question 13

Will this base work for the ShopFox 1825 19" Bandsaw? View answer

Asked 18 ´days ago | Shop Fox Extreme-Duty Mobile Base

Question 14

Can this product tint lacquer finish? View answer

Asked 18 ´days ago | Tintes universales Mixol, 20 ml

Question 15

What is the I.D. of the 5 inch side? I am needing an adapter to connect a 4 inch hose to a 5 inch tool outlet. View answer

Asked 22 ´days ago | Infinity Tools 5" to 4" Reducer

Question 16

Can the flexible vacuum hose be cut down to size? View answer

Asked 22 ´days ago | Infinity Tools Quick-Snap 5-Piece Dust Collection Flex Adaptors Kit with No Hose

Question 17

What is the minimum thickness rail and stile that can be used with this bit set? View answer

Asked 22 ´days ago | Infinity Tools 1/2" Shank 3-Pc. Ultimate Glass Door Making Router Bit Set

Question 18

Sleeve size View answer

Asked 26 ´days ago | Shark Corp. Saw Protective Sleeve

Question 19

does it work on a router table? View answer

Asked 1 ´month ago | Infinity Tools Vertical Router Sled

Question 20

Does the JessEm Pow-R-Tek SR™ Router run on 220-240v? View answer

Asked 1 ´month ago | JessEm Pow-R-Tek SR™ Router with Variable Speed Control Box

Question 21

What is in the box Infinity Tools Plycore Drill Press Table Only View answer

Asked 1 ´month ago | Infinity Tools Plycore Drill Press Table Only

Question 22

What xxxx sizes do these bits comport to? View answer

Asked 1 ´month ago | Infinity Tools 7-Pc. Tapered Drill & Countersink Set

Question 23

Does the 6" Dadonator dado stack work with the Dewalt DWE7491 table saw? View answer

Asked 1 ´month ago | Support

Question 24

Does offer include both sections of the connector? View answer

Asked 1 ´month ago | Infinity Tools MagSnap Dust Collection Ports with Hose Clamp

Question 25

Is this product ABS? View answer

Asked 1 ´month ago | Infinity Tools 4" Connector

Question 26

Hi I'm planning to just use the cove combo and use 1/4 ply as panel. Can I purcase 2 bits instead of 3? Thanks View answer

Asked 1 ´month ago | Juego de 3 brocas para rebajadora de puertas de gabinete con vástago de 1/2" de Infinity Tools

Question 27

Is your stock material true 2” thick to start with? View answer

Asked 1 ´month ago | Infinity Tools 2-Pc. GameDay Tray Making Templates

Question 28

Where are these bits made? View answer

Asked 1 ´month ago | Infinity Tools Brad Point Drill Bit Sets

Question 29

What is the line options View answer

Asked 1 ´month ago | Hierro para marcar con grabador Infinity Tools

Question 30

What is the outside diameter of the rings? View answer

Asked 1 ´month ago | Juego de 10 anillos de bloqueo de inserción JessEm

Question 31

What hardwood router speeds to recommend for the large and junior? View answer

Asked 1 ´month ago | Infinity Tools 1/2" Shank 4-Pc. Master Lock-Miter Bit & Setup Jig Package

Question 32

RPM range? View answer

Asked 1 ´month ago | Hoja de sierra de ranurar de punta plana de 8" de Infinity Tools, orificio de 5/8"

Question 33

can it be used on exterior wood applications View answer

Asked 1 ´month ago | Gork's Goodfilla, Heavy Body Wood Grain Filler

Question 34

Are there accessories available, such as extensions for pepper mill drilling? View answer

Asked 1 ´month ago | Famag Bormax³ Carbide-Tipped Forstner Bits

Question 35

Gate leg table project. View answer

Asked 1 ´month ago | Infinity Tools 1/2" Shank Drop Leaf Table Router Bit Set

Question 36

What is the height of your 1-3/4" OD rub collar for a 3/4" spindle shaper - SKU: RUB-100 View answer

Asked 1 ´month ago | Infinity Tools Rub Collars For Shape Up Shaper Cutters, 3/4" I.D.

Question 37

what are the dimensions of the 4oz delrin mallet? View answer

Asked 1 ´month ago | Grace Brass Mallet With Delrin Face

Question 38

Can the bearing be placed on the top? the opposite from the way the bearing is positioned in the photos? View answer

Asked 1 ´month ago | Cortadora de ranuras Infinity Tools con eje de vástago de 1/2"

Question 39

Can I buy this router table package without the router lift and if so, what would the price be? View answer

Asked 1 ´month ago | Infinity Tools Essential Router Table Package with JessEm Rout-R-Plate (03100)

Question 40

What size are the heavy duty casters rods.i know the wheels are 3 inch and rod is 1" long. Is the rod 3/8,5/8 thick View answer

Asked 2 ´months ago | Infinity Tools Heavy-Duty Double-Locking Caster Set, 4-pc.

Question 41

will this fit the Kreg track saw (the original blade is 165 mm, with 20 mm arbor hole and 2.2 mm kerf) View answer

Asked 2 ´months ago | Infinity Tools Track Master, Premium Saw Blades For Track Saws

Question 42

I have a Hitachi C10FS , without a large base . How do I support the 48 inch fence on either side of the saw? View answer

Asked 2 ´months ago | Infinity Tools 96" Professional Miter Saw Fence System

Question 43

How to set up locking miter bit on 3/8 wood View answer

Asked 2 ´months ago | Infinity Tools 1/2" Shank 4-Pc. Master Lock-Miter Bit & Setup Jig Package

Question 44

Will bits allow wood to join at 180 deg? View answer

Asked 2 ´months ago | Infinity Tools 1/2" Shank 4-Pc. Master Lock-Miter Bit & Setup Jig Package

Question 45

Can I get this router stand with the top and fence without the router lift? View answer

Asked 2 ´months ago | Infinity Tools Essential Router Table Package with JessEM Rout-R-Lift II (02310)

Question 46

What is the depth of the clamp from the gate to the hold down foot? View answer

Asked 2 ´months ago | Infinity Tools T-Track Toggle Clamp Kit

Question 47

What are the dimensions of the Scrub Plane blade? View answer

Asked 2 ´months ago | Infinity Tools Wood Scrub Hand Plane Replacement Blade

Question 48

How far apart are the tracks for fence. View answer

Asked 2 ´months ago | Infinity Tools Tablesaw Router Table w/ Stand Only

Question 49

What is this clamp made of? Besides the threaded pieces, is it plastic or aluminum? View answer

Asked 2 ´months ago | Infinity Tools Router & Table Saw Small Workpiece Holder

Question 50

Will this clamp work in a standard aluminum T-track? View answer

Asked 2 ´months ago | Abrazadera de trinquete MicroJIG con guía en T

Browse by Topic

Tools