{"title":"Table Saw Accessories","description":"\u003ch2\u003eTable Saw Accessories for Safer, More Precise Woodworking\u003c\/h2\u003e\n\u003cp\u003eA table saw is the centerpiece of most woodworking shops, and the right accessories transform it from a basic cutting machine into a precision instrument. Infinity Tools carries a comprehensive selection of table saw accessories — from blades and dado sets to zero-clearance inserts, crosscut sleds, and safety gear — all chosen to improve accuracy, safety, and versatility.\u003c\/p\u003e\n\u003cp\u003eThe foundation of accurate table saw work is the blade and the insert. Our \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-dadonator-xl-8-stacked-dado-saw-blade-set-5-8-arbor\"\u003eDadonator XL 8\" stacked dado set\u003c\/a\u003e cuts flat-bottomed dadoes, grooves, and rabbets in a single pass — essential for cabinetry, shelving, and joinery. The \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-10-laser-kerf-saw-blade-splitter-5-8-arbor\"\u003elaser-kerf blade splitter\u003c\/a\u003e keeps the kerf open during rip cuts to prevent binding and kickback. For chipout-free cuts on the bottom face of your workpiece, a zero-clearance insert is indispensable — the \u003ca href=\"https:\/\/infinitytools.com\/products\/betterly-trucut-zero-clearance-tablesaw-insert-system\"\u003eBetterly TruCut ZCI system\u003c\/a\u003e makes it easy to produce custom-fit inserts for any table saw.\u003c\/p\u003e\n\u003cp\u003eSleds and jigs multiply your table saw's capabilities. The \u003ca href=\"https:\/\/infinitytools.com\/products\/tcs-200-professional-crosscut-sled\"\u003eTCS-200 professional crosscut sled\u003c\/a\u003e provides a stable, accurate reference surface for crosscutting wide panels safely. The \u003ca href=\"https:\/\/infinitytools.com\/products\/thin-rip-guide-for-table-saw-bandsaw-router-table\"\u003ethin rip guide\u003c\/a\u003e allows safe, controlled narrow strip cuts. \u003ca href=\"https:\/\/infinitytools.com\/products\/jessem-clear-cut-table-saw-stock-guides\"\u003eJessEm Clear-Cut stock guides\u003c\/a\u003e hold the workpiece firmly against the fence throughout the cut for consistent, repeatable rips.\u003c\/p\u003e\n\u003ch3\u003eExplore More Sawing Categories\u003c\/h3\u003e\n\u003cp\u003eAlso browse \u003ca href=\"https:\/\/infinitytools.com\/collections\/saw-blades-accessories\"\u003eall sawing tools and accessories\u003c\/a\u003e, \u003ca href=\"https:\/\/infinitytools.com\/collections\/miter-saw-accessories-1\"\u003emiter saw accessories\u003c\/a\u003e, and the complete \u003ca href=\"https:\/\/infinitytools.com\/collections\/power-tools\"\u003epower tool accessories\u003c\/a\u003e collection.\u003c\/p\u003e","products":[{"product_id":"table-saw-setup-sanding-disc-premium-package","title":"Infinity Tools Table Saw Setup \u0026 Sanding Disc 5-Pc. Package, 5\/8\" Arbor","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003e\u003cstrong\u003eTurn Your Table Saw Into A Sanding and Setup Station With This Great Package!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse these hook and loop sanding disks and 10\" Set \u0026amp; Sanding Plate to turn your table saw into a versatile sanding station. With this setup, you can save space in your workshop by converting your 10\" table saw into a power sanding wheel.\u003c\/p\u003e\n\u003cp\u003eThis 5-Pc. package include one (1) each of an 80, 150 and 220 grit abrasive disk, (1) one each black hook \u0026amp; loop disc and (1) each precision ground setup and sanding disc. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Attach the black 10\" Hook and Loop Disc (item 102-010) to the Setup and Sanding Plate (item SSD-010)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2: \u003c\/strong\u003eAttach the Sanding Disc of your choice to the plate via the Hook and loop material\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3:\u003c\/strong\u003e Install the Setup and Sanding Plate to your table saw like a normal table saw blade\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4: \u003c\/strong\u003eGet to work sanding on your table saw the same as you would at a dedicated sanding wheel. When you're ready to change grits, just peel the sanding disc off of the hook and loop face and attach the new one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBONUS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Setup \u0026amp; Sanding Plate (item SSD-010) makes table saw, radial arm saw, and miter saw calibration faster and more accurate. Like our table saw blades, the disk is laser cut from premium cold-rolled steel plate, and is guaranteed to be within .002\" flat. It will allow you to fine-tune your saw for perfectly efficient and clean cuts. It's ideal for checking a machine's arbor for square or setting your miter gauge to the precise angle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-cut 5\/8\" arbor hole\u003c\/li\u003e\n\u003cli\u003eSmoother finish\u003c\/li\u003e\n\u003cli\u003eLonger life\u003c\/li\u003e\n\u003cli\u003eSaves money\u003c\/li\u003e\n\u003cli\u003eCooler running\u003c\/li\u003e\n\u003cli\u003eBlack hook material sticks to your sanding disk so the sand paper doesn't have to\u003c\/li\u003e\n\u003cli\u003eSandpaper sticks to Black Hook material via a Hook \u0026amp; Loop system for fast changeover\u003c\/li\u003e\n\u003cli\u003ePremium quality sandpaper is perfect for woodworking applications\u003c\/li\u003e\n\u003cli\u003eReplacement 10\" sanding discs available in 80, 150 and 220 grit, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847517786401,"sku":"00-SSD","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/00-SSD_Family_Shot_WhiteBG.jpg?v=1775672795"},{"product_id":"infinity-tools-10-laser-kerf-saw-blade-splitter-5-8-arbor","title":"Infinity Tools 10\" Laser Kerf Saw Blade \u0026 Splitter, 5\/8\" Arbor","description":"\u003cp\u003e\u003cstrong\u003eClean, Thin Kerfs Save Energy \u0026amp; Material!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Exclusive Infinity Cutting Tools Laser Thin-Kerf blade removes a sliver-thin amount of material (1\/16\") and makes quick work of Ripping and Crosscutting in hardwood, softwood, composites and plastics. At half the thickness of a standard-kerf blade, the 10\" x 40 Tooth Laser Kerf requires less power, cuts cleaner and leaves a super-smooth finish. Features our exclusive Chrome Armor coating to reduce friction and pitch buildup. The precision-machined blade stiffeners are permanently affixed to the blade's steel body with five copper core rivets. This innovative system absorbs both vibration and noise, making this possibly the quietest and smoothest-cutting saw blade you've ever used!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures include:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes Laser thin kerf splitter (TKS-001)\u003c\/li\u003e\n\u003cli\u003e10\" x 40T x 1\/16\" kerf with 5\/8\" arbor\u003c\/li\u003e\n\u003cli\u003eAlternate Top Bevel grind plus a negative hook angle for smoother cuts\u003c\/li\u003e\n\u003cli\u003eC4-Micro-Grain Carbide is long-lasting \u0026amp; can be sharpened multiple times\u003c\/li\u003e\n\u003cli\u003ePremium hot-rolled steel is laser-cut \u0026amp; hand-straightened\u003c\/li\u003e\n\u003cli\u003eChrome Armor Coating for less friction and a cleaner blade\u003c\/li\u003e\n\u003cli\u003eWhisper-quiet operation with almost no cutting resistance\u003c\/li\u003e\n\u003cli\u003eIdeal for cabinet, contractor and benchtop table saws\u003c\/li\u003e\n\u003cli\u003eMax depth of cut is 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eMade In European Union\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847518638369,"sku":"010-046","price":179.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/010-046_a1471832-afd2-413a-b998-075337c5c2ee.jpg?v=1779117696"},{"product_id":"infinity-tools-4pc-thick-kerf-flat-top-saw-blade-package-5-8-arbor","title":"Infinity Tools 4pc. Thick Kerf Flat-Top Saw Blade Package - 5\/8\" Arbor","description":"\u003cp\u003e\u003cstrong\u003eMake Flat Bottom Crosscuts On Your Tablesaw With Our Four-Piece Flat-Top Blade Set!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur exclusive Flat Top saw blades will allow you to make clean grooves and dados with perfectly flat bottoms.\u003c\/p\u003e\n\u003cp\u003eOur 080-001 Four-Piece Set includes one 5\/32\" Flat-top Blade, two 1\/4\" Flat-top Blade and one Precision Shim Set. Each blade is 8\" in diameter and features 24 flat-top ground carbide teeth with special side clearance for an ultra-smooth finish when cutting hardwood, softwood, laminates and veneered plywood. You will find a multitude of uses around your shop for these exclusive table saw blades. Use them for cutting tenons, box joints, rabbets and even dadoes on your table saw. But unlike dedicated dado saw blades, they will not leave even the slightest \"bat ears\" on your wood as they cut a perfectly flat bottom. They are ideal for cutting tenons on your table saw with a tenoning jig, just take one pass with the 1\/4\" kerf blade and you're done. Like all of our premium quality saw blades, these flat-top blades are made from a special German cold-rolled steel and durable C4 micro-grain carbide tips for a long service life and multiple sharpening. They are designed to deliver smooth and fray-free cuts even in the most demanding material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Flat Top saw blades make perfect:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBox Joints\u003c\/li\u003e\n\u003cli\u003eRabbets\u003c\/li\u003e\n\u003cli\u003eTenons (see video)\u003c\/li\u003e\n\u003cli\u003eFlat Bottom Crosscuts\u003c\/li\u003e\n\u003cli\u003ePrecision Cutoffs\u003c\/li\u003e\n\u003cli\u003eRipping\u003c\/li\u003e\n\u003cli\u003eCrosscutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* \u003cmeta charset=\"utf-8\"\u003eMade In European Union\u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847519490337,"sku":"080-001","price":399.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/080-001_4-Pc._Set.jpg?v=1779126822"},{"product_id":"5-pc-brass-bar-set-for-tool-set-up","title":"Infinity Tools 5-Pc. Brass Bar Set For Tool Set-Up","description":"\u003cp\u003e\u003cstrong\u003eA Perfect Fit, By Touch!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese precision made solid brass bars allow you to quickly and accurately set up cuts with your table saw, router, and other tools. The soft brass won't harm delicate cutting edges on your bits and blades. Each bar measures 2-1\/2\" long and is marked with its thickness for convenience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFive Thicknesses Included\n\u003cul\u003e\n\u003cli\u003e1\/8\"\u003c\/li\u003e\n\u003cli\u003e3\/16\"\u003c\/li\u003e\n\u003cli\u003e1\/4\"\u003c\/li\u003e\n\u003cli\u003e3\/8\"\u003c\/li\u003e\n\u003cli\u003e1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be stacked for measurements from 1\/8\" through 1-7\/16\". A must-have item for your toolbox.\u003c\/li\u003e\n\u003cli\u003eWith a Tolerance of +\/-.004\" these setup bars are a perfect choice for any woodworking setup application. Not recommended for metalworking or machinist setup.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847520997665,"sku":"100-128","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-128_Brass_Setup_Bars_WhiteBG.jpg?v=1748020340"},{"product_id":"milescraft-push-stick","title":"Milescraft Push Stick","description":"\u003cp\u003e\u003cstrong\u003eThis Push Stick is Ergonomically Correct For Ultimate Comfort \u0026amp; Safety\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're using your table saw or router table without a good quality push stick you are taking an unnecessary risk. Keep you hands away from the spinning router bit or saw blade with this useful safety tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Benefits Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolidly built push stick for guiding material through table saws and router tables.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTall tilted handle keeps hands away from cutting blade or bit\u003c\/li\u003e\n\u003cli\u003eRear foot grabs material\u003c\/li\u003e\n\u003cli\u003eSoft surface base provides control without damaging the stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHigh visibility yellow - Easily located in a busy shop\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milescraft","offers":[{"title":"Default Title","offer_id":46847523422497,"sku":"100-346","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/3404_a1-webo.webp?v=1705895074"},{"product_id":"table-saw-taper-jig","title":"Infinity Tools Table Saw Taper Jig","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eOne of the first accessories that many woodworkers purchase for the table saw is a tapering jig. \u003c\/span\u003e\u003cspan\u003eIt’s used to safely make long tapering cuts at the table saw for things like table legs or angled panel cuts. \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Infinity tapering jig is made from extruded aluminum for stiffness and lightness in use and \u003c\/span\u003etakes the guess-work out of making perfectly tapered cuts.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYou can choose either 0-15° on one side of the scale \u003c\/span\u003e\u003cspan\u003eor select a pitch angle, with 0-3\" of angle per linear foot, settable in quarter-inch increments. \u003c\/span\u003e\u003cspan\u003eIt features a tall handle for safe operation \u003c\/span\u003eand a \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003emovable stop block to help steady your workpiece through the cut. \u003c\/span\u003e\u003cspan\u003eOnce you determine your proper angle, \u003c\/span\u003e\u003cspan\u003eset the arched locking bar into place \u003c\/span\u003e\u003cspan\u003eand position your table saw fence. \u003c\/span\u003e\u003cspan\u003eHold the jig against your fence, \u003c\/span\u003e\u003cspan\u003eplace the workpiece against the stop block\u003c\/span\u003e\u003cspan\u003e and guide it through your saw blade.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s just that easy and the results are repeatable. The Infinity Tools table saw taper jig is a must-have for any woodworker’s shop. \u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847523651873,"sku":"100-146","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/onthesawsquare.jpg?v=1749561471"},{"product_id":"3-4-1-2-universal-fence-clamp-pair","title":"Infinity Tools 3\"- 4-1\/2\" Universal Fence Clamp; pair","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\u003c\/style\u003e\n\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eThe Go-To Clamp For Your Sacrificial Fence Needs - They Don't Get In The Way Of Your Woodworking!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you need to attach a sacrificial fence to your table saw, router table, bandsaw or miter saw's current fence, we highly recommend picking up a set of our Universal Table Saw Fence Clamps. They stay completely out of your way when running wood across the sacrificial fence, which means that you don't need to worry about getting hung up in the middle of the cut for any reason. Our universal fence clamps come in two sizes: 1-1\/2\" to 3\" (part #100-536) for smaller table saws and the 3\" to 4-1\/2\" (part 100-537) for most cabinet saws. Measuring your table saw fence's width will tell you which one is right for you.\u003c\/p\u003e\n\u003cp\u003eYou may be saying to yourself, \"Can't a Pony clamp hold the sacrificial fence in place just fine?\" The problem with Pony (or any other traditional clamp) is that they need to actually be on the outside of the objects they’re clamping, whereas these sweet little guys actually become a part of the fence and hold it down from the inside. Want to use a push stick? That's not a problem since the fence face is clear and unencumbered when using these clamps. And they're super easy to use: drill a 3\/8\" hole in the top part of your sacrificial fence (usually mdf), insert the universal clamps and fasten to your original fence. You can also use them to secure a stop-block for repeated cuts on your miter saw and they're especially useful for attaching taller fences to your router table.\u003cstrong\u003e Sold in pairs.\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847524176161,"sku":"100-537","price":12.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/clamps_add1_c8d8fe04-78f7-44ff-9144-8b626bad2881.webp?v=1722009760"},{"product_id":"magswitch-professional-table-featherboard","title":"Magswitch Professional Table Featherboard","description":"\u003cp style=\"text-align: left;\"\u003eMove Beyond the mitre slot! The Magswitch Professional Featherboard brings all of the benefits of traditional featherboards with one major advantage - complete flexibility in use. The Magswitch Pro. Featherboard offers versatility on table saws, band saws, planers and Jointers. Easy to use, easy to love. Simply align the featherboard with the material to be cut. Use one hand to apply pressure and the other to switch the magnets on. Position the featherboard so it doesn't’t pressure the saw blade. Leave Magswitch off when done.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eFast easy setup\u003c\/li\u003e\n\u003cli\u003ePrecise positioning\u003c\/li\u003e\n\u003cli\u003ePerfect for infeed \/ outfeed applications\u003c\/li\u003e\n\u003cli\u003eEasily turns magnets on and off and provides powerful control\u003c\/li\u003e\n\u003cli\u003eLock the featherboard tight with just the twist of a knob\u003c\/li\u003e\n\u003cli\u003eUse for infeed \/ outfeed – your work stays in one place firmly\u003c\/li\u003e\n\u003cli\u003eUse with table saw fence on left side of blade\u003c\/li\u003e\n\u003cli\u003eComes with 2 powerful MagJig 150's, featuring 150 lbs of holding force each\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525290273,"sku":"100-617","price":92.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8110328_edit1_1024x1024_2x_67f600f8-5626-4ace-a05a-be0161ea98ee.webp?v=1756914483"},{"product_id":"magswitch-magjig-150","title":"Magswitch MagJig 150","description":"\u003cp\u003eDesigned as the \"Heart\" of the Magswitch Workholding System, the MagJig 150 is a switchable magnetic clamp with 150 lbs of workholding force. It's fast, strong and precise positioning allow you to create unique fixtures that attach themselves to any cast iron top or steel fence. Use two of them in the Universal Base, item #100-623 along with all the other attachments to create a complete workholding system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple and fast, the ultimate strong clamp\u003c\/li\u003e\n\u003cli\u003eVersatile – use anywhere on the table\u003c\/li\u003e\n\u003cli\u003eEasy on\/off – secure all your jigs \u0026amp; fixtures\u003c\/li\u003e\n\u003cli\u003eFast, strong, and precise positioning\u003c\/li\u003e\n\u003cli\u003eDrill hole with 40mm Forstner bit and simply insert the MagJig\u003c\/li\u003e\n\u003cli\u003eUse at least two per fixture\u003c\/li\u003e\n\u003cli\u003eAdd more for even greater holding force\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525552417,"sku":"100-622","price":61.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8110005_edit1_1024x1024_2x_db96cf38-9a08-4621-8df1-65f77fe93738.webp?v=1756914563"},{"product_id":"magswitch-dual-roll-guide","title":"Magswitch Dual Roll Guide","description":"\u003cp style=\"text-align: left;\"\u003eThe MagJig Dual Roller guide is the ultimate \"third hand\" when you are doing the most difficult and dangerous work. It helps supports a tall panel or hold down a long piece of wood and steady your resaw projects. You'll find a use on every cast-iron table in your shop!We recommend purchasing the Magswitch Starter Kit along with this item. It includes the Universal Mounting Base and two Magswitch 150 magnets.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eIncludes two black angular brackets\u003c\/li\u003e\n\u003cli\u003eHolds material against fence for firm control of tall work pieces.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with MagFence universal mounting base.\u003c\/li\u003e\n\u003cli\u003ePrecision sealed roller bearings.\u003c\/li\u003e\n\u003cli\u003eSmooth, non-maring flow of material.\u003c\/li\u003e\n\u003cli\u003eFast, precise setup on all steel or cast-iron tables.\u003c\/li\u003e\n\u003cli\u003ePerfect for infeed \/ outfeed applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525585185,"sku":"100-619","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8110130_edit1_1024x1024_2x_21822c2e-89bb-4fac-ba00-f56c2f625e7f.webp?v=1756914609"},{"product_id":"magswitch-vert-featherboard-attachment-w-risers","title":"Magswitch Vert. Featherboard Attachment w\/ Risers","description":"\u003cp\u003eThe Vertical Featherboard Attachment tool is for use with the Magswitch Workholding System and The Pro Table Featherboard. In the Magswitch Workholding System, it mounts to the Reversible Featherboard Attachment, Universal Mounting Base and MagJigs (each sold separately – note, these are the tools that make up the Starter Kit). Adds a dimension of dual plane workholding. When attached to the Pro Table Featherboard, or Reversible Featherboard, the Vertical Featherboard Attachment can be mounted in a vertical position from the top for pressure down on the material at the same time the horizontal featherboard is holding the material against the fence. When set up in the stacked position using the risers, you get dual featherboard hold on the same horizontal plane - ideal for tall material. This tool helps protect against kickbacks on vertical and horizontal plane. Magswitch featherboards feature the core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSafety against kickbacks, both in vertical and horizontal position\u003c\/li\u003e\n\u003cli\u003eCan be stacked for extra height and holding power\u003c\/li\u003e\n\u003cli\u003eBolts directly to the Pro Table Featherboard or Reversible Featherboard\u003c\/li\u003e\n\u003cli\u003eNot limited by miter slot, fastens firmly anywhere on a cast iron or steel worktop or fence\u003c\/li\u003e\n\u003cli\u003eIdeal for taller material\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525650721,"sku":"100-626","price":28.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/N_VertattachkitBeautyV3_1024x1024_2x_7046dffa-9837-4523-b5a5-a0f5f795220a.webp?v=1756914695"},{"product_id":"magswitch-pro-table-featherboard-vertical-attachment-kit","title":"Magswitch Pro Table Featherboard  Vertical Attachment Kit","description":"\u003cp style=\"text-align: left;\"\u003eThe Pro Table Featherboard features all of the benefits of traditional featherboards with one major advantage - complete flexibility of use. It offers a strong hold-down on any cast iron router table, table saw, band saw, planer or jointer. The Vertical Featherboard Attachment can be mounted in a vertical position from the top for downward pressure on your material while at the same time the horizontal featherboard is holding the material against your fence. When set-up in the stacked position using the risers, you get dual featherboard hold on the same horizontal plane - ideal for tall material. This dream duo helps protect against kickbacks on both vertical and horizontal planes.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThis money-saving package includes one each of the Magswitch Professional Table Featherboard (100-617) and the Magswitch Vertical Featherboard Attachment (100-626)\u003c\/p\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525683489,"sku":"100-627","price":103.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-627_base.webp?v=1705895211"},{"product_id":"magswitch-thin-stock-guide-ripping-jig","title":"Magswitch Thin Stock Guide \u0026 Ripping Jig","description":"\u003cp style=\"text-align: left;\"\u003eThe Ultimate Thin Ripping \u0026amp; Hold Down Guide performs three useful functions in your shop. First, the adjustable ball-bearing in the center of the jig extends and retracts for accurate and repeatable thin ripping jobs. Second, it features a sloped side which locks down any stock thickness from 1\/16\" to 3\/4\", freeing your hands and making your work more accurate and safe. Lastly, the opposite side is a molded step, designed to safely hold down 1\/8\", 1\/4\" and 3\/8\" thick stock. Designed to be used with either the Magswitch Workholding System Starter Kit or the combination of the Magswitch Universal Base and MagJig 150's.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures Include: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eAccurate and repeatable guide for thin stock ripping\u003c\/li\u003e\n\u003cli\u003eSafely hold down any thickness of stock from 1\/16\" up to 3\/4\" thick\u003c\/li\u003e\n\u003cli\u003eMinimizes chatter for extra smooth cuts\u003c\/li\u003e\n\u003cli\u003eLow profile design for use even on small work surfaces\u003c\/li\u003e\n\u003cli\u003eNot limited by miter slot, fits securely anywhere on iron or steel work tops or fences\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSafety First:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eUse a Zero Clearance Insert \u003c\/li\u003e\n\u003cli\u003eUse a push stick\u003c\/li\u003e\n\u003cli\u003eUse a riving knife or splitter\u003c\/li\u003e\n\u003cli\u003eUse you saw's blade guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFor optimal results on your table saw, we recommend the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eCheck to make sure your fence is parallel (or with slight toe-out) relative to your sawblade.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eUse a Thin Kerf blade to maximize stock yield.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eDon't use stock which is already narrow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847525781793,"sku":"100-624","price":35.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8110362_edit1_1024x1024_2x_b4f6d5e4-213e-41a8-988d-8a76470a3972.webp?v=1756914822"},{"product_id":"magswitch-5-pc-master-workholding-package","title":"Magswitch 5-Pc. Master Workholding Package","description":"\u003cp\u003eThe Magswitch Workholding System is a unique collection of tools that makes each cut incredibly safe and easy. This system uses super-strong magnets to attach to any cast iron or steel tool top. See below for links to product details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis 5-piece Magswitch Workholding System comes with the following items: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-workholding-system-starter-kit\" target=\"_blank\" title=\"Magswitch Workholding System Starter Kit\" rel=\"noopener\"\u003eMagswitch Starter Kit, item 100-615 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-resaw-guide\" target=\"_blank\" title=\"Magswitch Resaw Guide\" rel=\"noopener\"\u003eMagswitch Resaw Guide, item 100-618 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-dual-roll-guide\" target=\"_blank\" title=\"Magswitch Dual Roll Guide\" rel=\"noopener\"\u003eMagswitch Dual Roller Guide, item 100-619 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-thin-stock-guide-ripping-jig\" target=\"_blank\" title=\"Magswitch Thin Stock Guide \u0026amp; Ripping Jig\" rel=\"noopener\"\u003eMagswitch Ultimate Thin Stock Jig, item 100-624 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-vert-featherboard-attachment-w-risers\" target=\"_blank\" title=\"Magswitch Vert. Featherboard Attachment w\/ Risers\" rel=\"noopener\"\u003eMagswitch Vertical Featherboard Attachment, item 100-626\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847526076705,"sku":"100-640","price":274.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-640_base.webp?v=1705895223"},{"product_id":"magswitch-2-pc-package-w-starter-kit-featherboard","title":"Magswitch 2-Pc. Package w\/ Starter Kit \u0026 Featherboard","description":"\u003cp\u003eThe Magswitch Workholding System is a unique collection of tools that makes each cut incredibly safe and easy. And it's the only workholding solution you'll ever need because it fits every cast iron or steel top you've got in your shop. See below for links to product details and videos.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis 2-piece Magswitch Workholding System comes with the following items\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.com\/products\/magswitch-workholding-system-starter-kit?_pos=5\u0026amp;_sid=e5493f8a2\u0026amp;_ss=r\" target=\"_blank\"\u003eMagswitch Starter Kit, item 100-615\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.com\/products\/magswitch-vert-featherboard-attachment-w-risers?_pos=5\u0026amp;_sid=7f7138ba8\u0026amp;_ss=r\" target=\"_blank\"\u003eMagswitch Vertical Featherboard Attachment, item 100-626\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847526240545,"sku":"100-642","price":164.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-642_add-2.webp?v=1705895226"},{"product_id":"magswitch-resaw-guide","title":"Magswitch Resaw Guide","description":"\u003cp style=\"text-align: left;\"\u003eThis ball-bearing based resaw fence allows wood to flow more smoothly than anything you have ever tried. Angled to allow for blade drift, it also makes a perfect outfeed work support. Includes two black angle brackets to mount directly to Magswitch Universal Mounting Base. We recommend purchasing the Magswitch Starter Kit along with this item. It includes the Universal Mounting Base and two Magswitch 150 magnets.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eIncludes two black angular brackets\u003c\/li\u003e\n\u003cli\u003eDesigned for use with MagFence universal mounting base.\u003c\/li\u003e\n\u003cli\u003ePrecision sealed roller bearings.\u003c\/li\u003e\n\u003cli\u003eSmooth, non-maring flow of material.\u003c\/li\u003e\n\u003cli\u003eFast, precise setup on all steel or cast-iron tables.\u003c\/li\u003e\n\u003cli\u003ePerfect for infeed \/ outfeed applications.\u003c\/li\u003e\n\u003cli\u003eAngled face aids in adjusting for blade drift.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847526863137,"sku":"100-618","price":36.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/resaw2.jpg?v=1755694628"},{"product_id":"magswitch-universal-base","title":"Magswitch Universal Base","description":"\u003cp style=\"text-align: left;\"\u003eThe Magswitch Universal Mounting Base is the centerpiece of the Magswitch Workholding System. All Magswitch tool attachments are designed to fit the Universal Mounting Base. Low profile design enables use on small surfaces including fences and small table tops. Requires two MagJigs to secure the Universal Base to a steel or cast iron surface. Simply add the desired tool attachment, place anywhere on any steel or cast-Iron tabletop, and you ready to go. Add more Universal Mounting Bases and MagJigs to use multiple tools at the same time. Accepts the MagJig 150 (150 lbs of hold force) magnetic clamp and other Magswitch accessories.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847527125281,"sku":"100-623","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8110112_edit1_1024x1024_2x_b3f1dcd0-adc1-4533-8b80-9177650e02cb.webp?v=1756914876"},{"product_id":"magswitch-2-pc-starter-kit-w-18-fence-package","title":"Magswitch 2-Pc. Starter Kit w\/ 18\" Fence Package","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp align=\"left\"\u003eThe Magswitch Workholding System is a unique collection of tools that makes each cut incredibly safe and easy. And it's the only workholding solution you'll ever need because it fits every cast iron or steel top you've got in your shop. See below for links to product details and videos.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eThis 2-piece Magswitch package comes with the following items;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.infinitytools.com\/magswitch-starter-ki\" rel=\"noopener\" target=\"_blank\"\u003eMagswitch Starter Kit, item 100-615\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.infinitytools.com\/magswitch-universal-t-track-fences\" rel=\"noopener\" target=\"_blank\"\u003eMagswitch 18\" Universal Track, item 100-620 \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847527551265,"sku":"100-641","price":184.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-641_add-3.webp?v=1705895223"},{"product_id":"magswitch-workholding-system-starter-kit","title":"Magswitch Workholding System Starter Kit","description":"\u003cp style=\"text-align: left;\"\u003eThe Perfect entré into the Magswitch Workholding System. The Starter Kit comes complete with the Reversible Featherboard Attachment, the Universal Mounting Base and two MagJig 150’s. Once you have this tool, get all the other great tool attachments and simply mount to the base as needed. Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Not limited by the miter slot. Featherboard is reversible for left and right hand feeds. Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks. Low profile design for use on your smallest tables.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eAccepts all Magswitch workholding accessories\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eWorks with the Vertical Featherboard Attachment\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eReversible to work on either side of your saw blade\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eSmall footprint takes little space on your worktop\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eWorks on any iron surface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847528632609,"sku":"100-615","price":141.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/8100134_edit1_1024x1024_2x_f42bdbe0-b982-48be-990a-67d27bd988c8.webp?v=1756914986"},{"product_id":"magswitch-reversible-featherboard","title":"Magswitch Reversible Featherboard","description":"\u003cp style=\"text-align: left;\"\u003eThe Magswitch Reversible Featherboard tool attachment is for use with the Magswitch Workholding System and mounts to the Universal Mounting Base and MagJigs. Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Not limited by the miter slot. Featherboard is reversible for left and right hand feeds. Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks. Low profile design for use on your smallest tables and fences.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003eNot limited by miter slot - fits anywhere on steel or cast iron tops or fences\u003c\/li\u003e\n\u003cli\u003eReversible for left or right hand side feed\u003c\/li\u003e\n\u003cli\u003eLow profile design perfect even the smallest work tops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e the Reversible Featherboard must be used in conjunction with the \u003ca href=\"http:\/\/www.infinitytools.com\/Magswitch-Universal-Base\/productinfo\/100-623\/\" target=\"_blank\"\u003eUniversal Mounting Base\u003c\/a\u003e and\u003ca href=\"http:\/\/www.infinitytools.com\/Magswitch-MagJig-150\/productinfo\/100-622\/\" target=\"_blank\"\u003e MagJig 150's\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847529353505,"sku":"100-625","price":25.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/Revfeather2.webp?v=1755693301"},{"product_id":"magswitch-master-package-4-with-18-and-36-universal-tracks","title":"Magswitch Master Package #4; with 18 and 36 Universal Tracks","description":"\u003cp\u003eThe Magswitch Workholding System is a unique collection of tools that makes each cut incredibly safe and easy. And it's the only workholding solution you'll ever need because it fits every cast iron or steel top you've got in your shop. Break-free from the miter slot and use this innovative workholding system on any woodworking table, anywhere you want it. See below for links to product details and videos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis 7-piece Magswitch Workholding System comes with the following devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-workholding-system-starter-kit\" target=\"_blank\" title=\"Magswitch Workholding System Starter Kit\" rel=\"noopener\"\u003eMagswitch Starter Kit, item 100-615 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-resaw-guide\" target=\"_blank\" title=\"https:\/\/infinitytools.com\/products\/magswitch-resaw-guide\" rel=\"noopener\"\u003eMagswitch Resaw Guide, item 100-618 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-dual-roll-guide\" target=\"_blank\" title=\"Magswitch Dual Roll Guide\" rel=\"noopener\"\u003eMagswitch Dual Roller Guide, item 100-619 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-universal-ttrack-fence\" target=\"_blank\" title=\"Magswitch Universal T-Track Fence\" rel=\"noopener\"\u003eMagswitch 18\" Universal Track, item 100-620 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-universal-ttrack-fence?variant=50141738664225\" title=\"Magswitch Universal T-Track Fence\"\u003eMagswitch 36\" Universal Track, item 100-621 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-thin-stock-guide-ripping-jig\" target=\"_blank\" title=\"Magswitch Thin Stock Guide \u0026amp; Ripping Jig\" rel=\"noopener\"\u003eMagswitch Ultimate Thin Stock Jig, item 100-624 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/infinitytools.com\/products\/magswitch-vert-featherboard-attachment-w-risers\" target=\"_blank\" title=\"Magswitch Vert. Featherboard Attachment w\/ Risers\" rel=\"noopener\"\u003eMagswitch Vertical Featherboard Attachment, item 100-626\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magswitch","offers":[{"title":"Default Title","offer_id":46847529812257,"sku":"100-643","price":409.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/100-643_base.webp?v=1705895227"},{"product_id":"milescraft-table-saw-dust-collector-dust-cutter","title":"Milescraft Table Saw Dust Collector - Dust Cutter","description":"\u003cp data-end=\"102\" data-start=\"57\"\u003e\u003cstrong\u003eBreathe Easier and Keep Your Shop Cleaner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"512\" data-start=\"104\"\u003eTable saws are one of the biggest sources of airborne dust in any woodworking shop. The \u003cstrong data-end=\"218\" data-start=\"192\"\u003eMilescraft DustCutter™\u003c\/strong\u003e provides a simple, effective solution to dramatically reduce the mess and improve shop air quality. Designed to capture dust directly at the source, the DustCutter can reduce table saw dust by \u003cstrong data-end=\"424\" data-start=\"412\"\u003eover 90%\u003c\/strong\u003e, helping keep your workspace cleaner and safer. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"737\" data-start=\"514\"\u003eWhether you’re working in a professional shop, garage workshop, or jobsite environment, the DustCutter offers a fast and affordable way to control dust without complicated installations or expensive dust collection systems.\u003c\/p\u003e\n\u003cp data-end=\"802\" data-start=\"744\"\u003e\u003cstrong\u003eUniversal Dust Collection for Contractor \u0026amp; Jobsite Saws\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1107\" data-start=\"804\"\u003eThe DustCutter attaches easily to most contractor-style and portable table saws with base dimensions up to \u003cstrong data-end=\"934\" data-start=\"911\"\u003e23\" wide x 19\" deep\u003c\/strong\u003e. Its durable nylon collection bag mounts directly to the saw stand or base and captures dust before it spreads throughout your shop. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"1149\" data-start=\"1109\"\u003eThis flexible design makes it ideal for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1149\" data-start=\"1109\"\u003eJobsite table saws\u003c\/li\u003e\n\u003cli data-end=\"1149\" data-start=\"1109\"\u003eContractor saws\u003c\/li\u003e\n\u003cli data-end=\"1149\" data-start=\"1109\"\u003eDIY and garage workshops\u003c\/li\u003e\n\u003cli data-end=\"1149\" data-start=\"1109\"\u003eSmall shops without full dust collection systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1374\" data-start=\"1277\"\u003eInstallation takes only minutes, allowing you to improve dust control without modifying your saw.\u003c\/p\u003e\n\u003cp data-end=\"1374\" data-start=\"1277\"\u003e\u003cstrong\u003eThree Dust Collection Modes for Maximum Versatility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1567\" data-start=\"1437\"\u003eThe DustCutter is designed to adapt to different shop setups and workflow needs. Use it in one of three collection configurations:\u003c\/p\u003e\n\u003cp data-end=\"1726\" data-start=\"1569\"\u003e\u003cstrong data-end=\"1587\" data-start=\"1569\"\u003eCollector Mode\u003c\/strong\u003e\u003cbr data-end=\"1590\" data-start=\"1587\"\u003eDust collects in the durable bag during operation. When finished, simply unzip the bottom and empty the contents into a waste container.\u003c\/p\u003e\n\u003cp data-end=\"1853\" data-start=\"1728\"\u003e\u003cstrong data-end=\"1743\" data-start=\"1728\"\u003eFunnel Mode\u003c\/strong\u003e\u003cbr data-end=\"1746\" data-start=\"1743\"\u003eOpen the bottom zipper to continuously funnel sawdust directly into a bucket or trash container during use.\u003c\/p\u003e\n\u003cp data-end=\"1960\" data-start=\"1855\"\u003e\u003cstrong data-end=\"1870\" data-start=\"1855\"\u003eVacuum Mode\u003c\/strong\u003e\u003cbr data-end=\"1873\" data-start=\"1870\"\u003eConnect a \u003cstrong data-end=\"1920\" data-start=\"1883\"\u003e1-1\/4\" or 2-1\/2\" shop vacuum hose\u003c\/strong\u003e to actively extract dust while cutting.\u003c\/p\u003e\n\u003cp data-end=\"2072\" data-start=\"1962\"\u003eWith these options, the DustCutter works whether you have a full dust collection system or just a shop vacuum.\u003c\/p\u003e\n\u003cp data-end=\"2115\" data-start=\"2079\"\u003e\u003cstrong\u003eDurable Design Built for the Shop\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"2340\" data-start=\"2117\"\u003eConstructed from \u003cstrong data-end=\"2158\" data-start=\"2134\"\u003etear-resistant nylon\u003c\/strong\u003e, the DustCutter is built to withstand the rigors of woodworking environments. An internal baffle helps prevent clogging and bag collapse while maintaining steady airflow during use.\u003c\/p\u003e\n\u003cp data-end=\"2544\" data-start=\"2342\"\u003eThe generous \u003cstrong data-end=\"2385\" data-start=\"2355\"\u003e3 cubic foot dust capacity\u003c\/strong\u003e allows extended cutting sessions before emptying, making it practical for both hobbyists and professional woodworkers. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"2562\" data-start=\"2551\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eReduces table saw dust by \u003cstrong data-end=\"2604\" data-start=\"2592\"\u003eover 90%\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eFits most contractor and portable table saws\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eWorks with saw bases up to \u003cstrong data-end=\"2702\" data-start=\"2685\"\u003e23\" W x 19\" D\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eThree collection modes: \u003cstrong data-end=\"2763\" data-start=\"2731\"\u003ecollector, funnel, or vacuum\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eCompatible with \u003cstrong data-end=\"2818\" data-start=\"2784\"\u003e1-1\/4\" and 2-1\/2\" vacuum hoses\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eDurable tear-resistant nylon construction\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eLarge \u003cstrong data-end=\"2902\" data-start=\"2875\"\u003e3 cu. ft. dust capacity\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2562\" data-start=\"2551\"\u003eQuick installation with no permanent modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"3003\" data-start=\"2964\"\u003e\u003cstrong\u003eA Simple Upgrade for Cleaner Cutting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"3276\" data-start=\"3005\"\u003eIf you’re working without a dedicated dust collection system—or just want to improve your existing setup—the Milescraft DustCutter is a smart upgrade. By capturing dust where it’s created, it helps protect your shop, your tools, and the air you breathe while woodworking.\u003c\/p\u003e","brand":"Milescraft","offers":[{"title":"Default Title","offer_id":46847537611041,"sku":"115-116","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/115-116_base_1.webp?v=1772646236"},{"product_id":"replacement-inserts-for-betterley-tru-cut-insert-systems-4-pc","title":"Replacement Inserts For Betterley Tru-Cut Insert System, 4-Pcs.","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n.style1 {font-size: larger}\n--\u003e\n\u003c\/style\u003e\n\u003ch4 align=\"center\" style=\"text-align: left;\"\u003eDon't replace the entire throat plate - just put in a new insert!\u003c\/h4\u003e\n\u003cp\u003eBy not supporting your stock close to the saw blade's teeth the standard throat plate will allow your workpiece to chip and tear on the bottom of the cut. Worse yet, small pieces can fall in the gap between blade and saw creating a dangerous kickback situation or even ruing your saw blade.\u003c\/p\u003e\n\u003cp\u003ePrecision machined from solid aluminum, these Tru-Cut™ inserts are guaranteed to never twist warp or bend. They will dramatically reduce unsightly tearout and chipping along the edge of your cut and make your stock come out smoother than ever before.\u003c\/p\u003e\n\u003cp\u003eThis set includes four (4) replaceable phenolic inserts to be used with the Tru-Cut system.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Betterley","offers":[{"title":"Default Title","offer_id":46847554486561,"sku":"BIS-INS","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bis-110g_05_1_e260715f-010b-4ae8-80d4-e3caa405b3d0.webp?v=1721404598"},{"product_id":"infinity-tools-box-joint-jig-for-router-table-table-saw","title":"Infinity Tools  Box Joint Jig For Router Table \u0026 Table Saw","description":"\u003cp\u003e\u003cstrong\u003eA Precise And Easy-To-Use Box Joint Jig That Won't Break The Bank!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse this clever jig to make tight-fitting box joints with your router table or table saw. Use with our exclusive \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-10-x-80t-ultra-smooth-crosscutting-saw-blades\" target=\"_blank\" title='Infinity Tools 10\" x 80T Ultra-Smooth Crosscutting Saw Blades, 5\/8\" Bore' rel=\"noopener\"\u003eflat top saw blades\u003c\/a\u003e and you'll be making beautiful box joints in no time. Watch the video to see exactly how it's done.\u003c\/p\u003e\n\u003cp\u003eMade with a pair of sacrificial face plates mounted on an aluminum Ultra Track, this jig allows you to create a zero-clearance cut for multiple kerf widths on your table saw or router table. Throw in the lifetime guarantee against defects and picking up this pain-saving jig is a no brainer.\u003c\/p\u003e\n\u003cp\u003e*Color and material of sacrificial face plates may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCuts any box joint between 1\/8\" to 13\/16\" wide and 1-5\/8\" deep.\u003c\/li\u003e\n\u003cli\u003eWorks on a table saw or router table.\u003c\/li\u003e\n\u003cli\u003eAttaches to any miter gauge (not included).\u003c\/li\u003e\n\u003cli\u003eIncludes a 24\" aluminum Ultra Track with bit\/blade cutout and replaceable sub-fences.\u003c\/li\u003e\n\u003cli\u003eAdjustable pins prevent part slippage.\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee against defects in material or workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847554584865,"sku":"BJJ-001","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bjj-001_add2_1.webp?v=1705896690"},{"product_id":"infinity-tools-case-for-6-8-stacked-dado-blade","title":"Infinity Tools Case For 6\" \u0026 8\" Stacked Dado Blade","description":"\u003cp\u003eKeep your 6\" or 8\" stacked dado set safe and secure with our specially designed solid wood carry case. Beautifully constructed with attractive box-joints and made from 5\/8\" thick solid wood, make sure to add this great carry-case and protect your investment in top quality tooling. Fits any of our stacked dado sets, including the Dadonator XL.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/craftisian.com\/reviews\/54-infinity-dadonator-dado-blade\" title=\"Infinity Dadonator Dado Blade Review by Craftisian\" rel=\"noopener\" target=\"_blank\"\u003eFeatured review of the SDB-800 Dadonator Set\u003c\/a\u003e \u003cspan\u003eGeorge of Craftisian highlights why our Dadonator is a game-changer for woodworkers tired of the trial-and-error hassle of other dado sets.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847556452641,"sku":"BOX-SDB","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/Dado_Box.jpg?v=1775504351"},{"product_id":"igaging-digialign-with-track","title":"iGaging DigiAlign With Track","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eEasy To Setup and Use, An Absolute Must-Have Shop Accessory!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe iGaging DigiAlign gauge is an ideal tool for getting your woodworking machines in tip-top-shape. Use it to get perfect alignment on your table saw, both for the blade and for the fence. Also use it for checking drill press arbor run-out, setting your planer and jointer knives and also shaper spindle run-out. The precision 6\" miter bar features strong magnets and expansion anvils for a prefect fit in any standard ¾\" x 3\/8\" miter channel. Slide the bar into the miter slot on your table saw and quickly get the precision you need to insure a perfect cut. Measure the distance from your fence to your blade in multiple points along the channel. \u003cbr\u003e\u003cbr\u003eThe large digital display gives you readings in metric, inch or fractional increments and has a 1\" range. With accuracy of .001\" and extra features like an ABS reading (absolute\/relative) and HOLD function you'll get precise setups every time. The versatility of this tool is amazing. Detach the digital indicator from its aluminum slide and use the 3\/8\" hole on the back mounting to fit it to multiple alignment tools. The digital indicator attaches to our magnetic base \u003ca href=\"https:\/\/infinitytools.com\/products\/magnetic-base-for-dial-or-digital-indicator\" rel=\"noopener\" target=\"_blank\"\u003e(MAG-001)\u003c\/a\u003e and other alignment helpers.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eExtra-large and easy to read display\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eReads in Fractions, Inch and Metric\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eMeasuring range from 4 - 11\"\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eAbsolute \/ Relative \u0026amp; Hold functions\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eStrong magnets on all bottom\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eAccuracy - +\/- .001\"\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eOne year life from 3V CR2032 battery ( extra battery included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iGaging","offers":[{"title":"Default Title","offer_id":46847557992737,"sku":"DAG-002","price":69.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/210240-3.jpg?v=1729000548"},{"product_id":"infinity-tools-dado-measuring-gauge-5-8-bore","title":"Infinity Tools Dado Measuring Gauge, 5\/8\" Bore","description":"\u003cp\u003e\u003cstrong\u003eQuickly and Easily Set Up Your Stacked Dado Blade with this Precision Gauge!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAccurately measure stock thickness and set up your dado cut in seconds with our exclusive jig! Our Dado Setup Gauge is designed to accurately measure 19 different stock thicknesses and tell you the exact combination of outside blades and chipper blades in your dado stack you need to make the cut. Guaranteed accurate to within 0.003\", this heavy-duty gauge will change the way you setup your stacked dado blade.\u003c\/p\u003e\n\u003cp\u003eWill work with any stacked dado set. When used with our \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-dadonator-jr-6-stacked-dado-saw-blade-set\" title='Infinity Tools Dadonator Jr., 6\" Stacked Dado Saw Blade Set' rel=\"noopener\" target=\"_blank\"\u003e6\" Dadonator™ Stacked Dado Sets\u003c\/a\u003e or \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-dadonator-8-stacked-dado-saw-blade-set\" title='Infinity Tools Dadonator, 8\" Stacked Dado Saw Blade Set' rel=\"noopener\" target=\"_blank\"\u003e8\" Dadonator™ Stacked Dado Sets\u003c\/a\u003e, simply match the appropriate notch on the gauge with the material thickness you'll be using. The instructions on the gauge show you which combination of blades and chippers to use. All of the Dadonator™ stacked dado blades are marked for easy identification so your setup will only take seconds! To fine-tune the cut we recommend using our \u003ca rel=\"noopener\" title='6 pc Shim Set for 6\" or 8\" Stacked Dado Blades' href=\"https:\/\/infinitytools.com\/products\/6-pc-shim-set-for-6-or-8-stacked-dado-blades\" target=\"_blank\"\u003edado shim set (DSS-100)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out these reviews:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.newwoodworker.com\/reviews\/infdadocalprrvu.html\" target=\"_blank\"\u003eNewWoodworker.com\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wwgoa.com\/article\/infinity-dado-gauge\/\" target=\"_blank\"\u003eWoodworkers Guild of America\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/craftisian.com\/reviews\/54-infinity-dadonator-dado-blade\" title=\"Infinity Dadonator Dado Blade Review\" rel=\"noopener\" target=\"_blank\"\u003eCraftisian\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847558353185,"sku":"DMG-800","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/dmg-800_1_2.webp?v=1736430618"},{"product_id":"incra-miter-1000se-with-18-to-31-fence-flip-stop","title":"INCRA Miter 1000SE with 18\" to 31\" Fence \u0026 Flip Stop","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003ch3 align=\"center\"\u003eINCRA MITER 1000 Special Edition - Perfect, Repeatable Accuracy Every Time\u003c\/h3\u003e\n\u003cp\u003eThe MITER1000 Special Edition (SE) features Incra's exclusive AngleLOCK Indexing System which delivers 41 Lock-Solid angle stops in 5° increments over a full 180° range. Combine this with the included GlideLOCK Miter Bar, Telescoping IncraLOCK Cut-off Fence and the Incra Flip Shop Stop, and you'll easily achieve mitering accuracy that you never thought possible. Whether it's your basic 90° cut-off, simple picture frames, or a 20-sided object, the Miter1000SE by Incra delivers perfect, repeatable accuracy everytime.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Miter 1000 Special Edition Features;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlideLOCK miter bar adjusts to fit any standard table saw\u003c\/li\u003e\n\u003cli\u003eINCRA-LOCK fence telescopes from 18\" to 31\"\u003c\/li\u003e\n\u003cli\u003eDual Flip Shop Stop Positioner with Incra's patented automatic positioning control\u003c\/li\u003e\n\u003cli\u003e41 Indexed Angle Stops every 5° over 180° range with special stops at 22-1\/2° and 67-1\/2°\u003c\/li\u003e\n\u003cli\u003eIncredible 1\/10th° resolution between stops with the vernier cursor\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Solid Steel Protractor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847559631137,"sku":"IMG-003","price":199.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/img-003_1.webp?v=1705896983"},{"product_id":"wixey-0-60-digital-table-saw-fence-readout","title":"Wixey 0\" - 60\" Digital Table Saw Fence Readout","description":"\u003cp\u003e\u003cstrong\u003eStep up the Accuracy of your Cuts with this Must-Have Table Saw Accessory!\u003c\/strong\u003e\u003c\/p\u003e\nThe Wixey Digital Table Saw Fence Readout provides unmatched accuracy in setting up and locating the rip fence on your table saw. It eliminates the frustration and guesswork when using your saw's built-in scale, tape measure, or ruler. The readout mounts to your existing table saw fence. It comes complete with a drill bit and self-tapping screws to mount the rails to the bottom of your saw's rip fence rail.\n\u003cp\u003eFits Beisemeyer, Powermatic, Jet, HTC and other T-Square fences. Also fits DeWalt, Vega and other fences that utilize round fence rails.\u003c\/p\u003e\n\u003cp\u003eThe digital readout can be quickly moved out of the way when it becomes necessary to remove the rip fence. When you reattach the readout to the fence, it maintains calibration.\u003c\/p\u003e\n\u003cp\u003eThe large, easy-to-read display shows decimal inches, inches with fractions, or millimeters. The fractions are displayed using “Precise Fraction Technology” which gives you 4 times the accuracy of other fractional readouts.\u003c\/p\u003e\n\u003cp\u003eTo calibrate the display, move the fence so that it lightly contacts the blade and then press the Calibrate button to zero the readout.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures Include:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation, setup, and calibration\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eUp to 60\" measuring length\u003c\/li\u003e\n\u003cli\u003eDisplays decimal inches, inches with fractions, or millimeters\u003c\/li\u003e\n\u003cli\u003eExtra-large and easy-to-read display\u003c\/li\u003e\n\u003cli\u003eResolution - 0.1mm, 0.005\", 1\/32\"\u003c\/li\u003e\n\u003cli\u003eAccuracy - +\/- .002\", +\/- 1\/500 in., +\/- .13mm, (per foot)\u003c\/li\u003e\n\u003cli\u003eRequires 2 AAA batteries (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eUses in the Shop:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate rip fence positioning on the table saw\u003c\/li\u003e\n\u003cli\u003ePreceisely spaced incremental cuts such as dadoes and grooves\u003c\/li\u003e\n\u003cli\u003eRepeatable accuracy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wixey","offers":[{"title":"Default Title","offer_id":46847559926049,"sku":"DFR-001","price":161.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/dfr-001_base_1.webp?v=1705896892"},{"product_id":"incra-miter-express","title":"INCRA Miter EXPRESS","description":"\u003ch4 align=\"center\" style=\"text-align: left;\"\u003eConverts ANY Miter Gauge Into A Crosscutting Power House!\u003c\/h4\u003e\n\u003cp\u003eUpgrade your miter gauge to the safety and extra crosscutting capacity of INCRA Miter Express sled. Converts ANY miter gauge into a crosscutting powerhouse, providing up to 24\" of crosscut range. \"Dock and Lock\" or remove your gauge in seconds. The twin t-slots provide an anchor point for the included Hold Down Clamp and user-made accessories. You won't find a more versatile miter sled on the market today. Does not include miter gauge.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMiter Express features:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with any standard Miter Gauge (Not Included)\u003c\/li\u003e\n\u003cli\u003eDouble any miter gauge's crosscut range up to 24\"\u003c\/li\u003e\n\u003cli\u003eDual embedded T-Tracks secure the included INCRA hold down clamp \u0026amp; other accessories\u003c\/li\u003e\n\u003cli\u003eSafely handles both extra large \u0026amp; extra small workpieces\u003c\/li\u003e\n\u003cli\u003eElimanates all side-play between table saw's miter slot and any miter gauge\u003c\/li\u003e\n\u003cli\u003eSuperb crosscut and mitering control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847559991585,"sku":"IMG-EXP","price":219.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/img-exp_base_1.webp?v=1705896988"},{"product_id":"micro-jig-grr-ripper-1-8-thin-stock-accessory","title":"MicroJIG GRR-Ripper 1\/8\" Thin-Stock Accessory","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eA woodworker knows that eye-catching details are what really make a project stand out. If you're a magician in the woodshop, this 1\/8” Leg accessory makes you a surgeon. This new add-on for the GRR-Ripper is your scalpel on the table saw, allowing you to  reach new levels of excellence and achieve new dimensions of accuracy. This accessory allows you to make rips as thin as 1\/8\" without breaking a sweat. Prior to this accessory, the level of control and surgical precision would have been virtually impossible for manual feeding. Now, producing consistent, clean, safe, and controlled cuts is a reality for thousands of workshops around the world. \u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847560614177,"sku":"MJG-204","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-204_base_1.webp?v=1705897009"},{"product_id":"incra-miter-1000-18-incra-track-fence-with-positioner","title":"INCRA Miter 1000 18\" Incra Track Fence With Positioner","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eThe INCRA Miter 1000 is a no-nonsense, high-performance Miter Gauge that's big on capability at a great price. It features a solid-steel laser cut protractor head with a gold anodized INCRA Track Fence and a red Stop Positioner. The sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate. Whether it's your basic 90° cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter1000 delivers perfect repeatable accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e41 AngleLock indexing stops every 5° over 180° range \u003c\/li\u003e\n  \u003cli\u003e1\/2° vernier cursor \u003c\/li\u003e\n  \u003cli\u003e Special stops at 22 1\/2° and 67 1\/2° \u003c\/li\u003e\n  \u003cli\u003eGlideLOCK Miter Bar with 6 expansion points \u003c\/li\u003e\n  \u003cli\u003e18\" Incra Track Fence\n\u003c\/li\u003e\n  \u003cli\u003eINCRA Sliding Stop Positioner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847561269537,"sku":"IMG-002","price":169.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/IMG-002_B.jpg?v=1715881463"},{"product_id":"micro-jig-grr-ripper-deflector-connector","title":"MicroJIG GRR-Ripper Deflector \/ Connector","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eThe MJ Deflector \/ Connector keeps flying wood chips at bay or acts as an extended blade guard for the GRR-Ripper. This useful accessory is great when working with larger stock when the need arrises to connect two GRR-Rippers together. A useful addition to the woodshop control system that never compromises your safety or the quality of your work.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847561761057,"sku":"MJG-208","price":13.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-208_base.webp?v=1705897013"},{"product_id":"incra-i-box-box-joint-jig-for-table-saw-router-table","title":"INCRA I-BOX - Box Joint Jig For Table Saw \u0026 Router Table","description":"\u003cdiv data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp style=\"text-align: left;\" align=\"center\"\u003e\u003cstrong\u003eThe Incra I-BOX Jig Makes Beautiful Box Joints, Fast \u0026amp; Easy!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"mso-bidi-font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Calibri;\"\u003eTo get right to the point, the \u003cspan style=\"font-style: italic; text-decoration: underline;\"\u003enew\u003c\/span\u003e INCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints \u0026amp; finger joints. It features fast setup for basic joints, plus advanced capability for unique decorative joints. \u003c\/span\u003eIts revolutionary design allows greater versatility and improved user safety compared to traditional jigs. \u003cspan style=\"line-height: 115%;\"\u003e This single jig can be used on both your table saw and your router table, and the I-Box's dual-pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1\/8\" - 3\/4\" range of pin widths \u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003ein lumber up to 1\" thick\u003c\/span\u003e\u003cspan style=\"line-height: 115%;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 115%;\"\u003e\u003cstrong\u003eThe advantages continue beyond the basics:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 115%;\"\u003eINCRA I-Box-exclusive box joints like the Center Keyed Box Joint can be used to produce symmetric patterns on a wider variety of lumber widths than traditional jigs, making it easier to adapt box joints to existing project plans. Taking the Center Keyed joint a step further, the Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects.\u003c\/span\u003e\u003c\/p\u003e\nAs a bonus, the I-Box can even be used to produce classic dentil moldings! Altering the spacing between cuts and height of the cutter lets you change the moulding's proportions to create a nearly infinite variety\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(0,96,147);\"\u003e\u003cspan style=\"background-color: rgb(255,255,255);\"\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(0,0,0);\"\u003e. And \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003eNothing says \"Craftsmanship\" like adding solid wood hinges to your projects. The I-Box can be used in conjunction with the \u003c\/span\u003e\u003cspan style=\"line-height: 14px; color: #000000;\"\u003eINCRA HingeCrafter\u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003e to produce wooden hinges in four different barrel diameters and in lengths up to 10\". \u003c\/span\u003e And to make sure you get to use all of the jigs' awesome features, we've include a 1-hour instructional DVD that covers everything from basic setup to advanced decorative joinery.\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThe INCRA I-Box is packed with innovative features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it on your table saw or router table to cut great looking box joints with a \u003ca rel=\"noopener\" title='Infinity Tools Dadonator Jr., 6\" Stacked Dado Saw Blade Set, 5\/8\" Bore' href=\"https:\/\/infinitytools.com\/products\/infinity-tools-dadonator-jr-6-stacked-dado-saw-blade-set-5-8-bore\" target=\"_blank\"\u003estacking-type dado blade\u003c\/a\u003e, \u003ca rel=\"noopener\" title='Infinity Tools Box Joint Jig Package with 1\/4\" Kerf Flat Top Blade and Setup Block Kit' href=\"https:\/\/infinitytools.com\/products\/infinity-tools-joint-jig-package-with-1-4-kerf-flat-top-blade-and-setup-block-kit\" target=\"_blank\"\u003ededicated box joint blade set\u003c\/a\u003e, or \u003ca rel=\"noopener\" title=\"Straight Router Bits\" href=\"https:\/\/infinitytools.com\/collections\/straight-spiral-router-bits\" target=\"_blank\"\u003estraight router bits.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReversible design works on either side of the cutter \u003cspan style=\"text-align: left; line-height: 115%;\"\u003eExclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1\/8\" - 3\/4\" range of pin widths.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExclusive INCRA GlideLOCK miter bar fits standard 3\/4\" x 3\/8\" miter slots with a 0.740\" - 0.762\" adjustment range\u003cspan style=\"line-height: 115%;\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eFront and rear blade guards; front guard also stabilizes boards vertically and is adjustable for 1\/8\" to \u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003e1\" lumber thicknesses for box joints or even thicker for other applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eThe wide fence allows clamping lumber securely into position while cutting much better than hand-holding boards, especially when joining small or large lumber (hand screw clamp not included).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eReversible \u0026amp; reusable MDF sub fence dramatically reduces or eliminates tea rout\u003c\/span\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847565005089,"sku":"BJJ-002","price":249.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bjj-002_feed_2.webp?v=1705896692"},{"product_id":"infinity-tools-splitter-for-laser-thin-kerf-saw-blade-010-046","title":"Infinity Tools Splitter For Laser Thin-Kerf Saw Blade, 010-046","description":"\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e our Laser Thin-Kerf Saw Blade (010-046) includes this splitter. But if you would like to have a second one on hand or have another 1\/16\" kerf saw blade in your shop, this  is a smart buy. The splitter kit has been specifically designed to work with our \u003ca rel=\"noopener\" title='Infinity Tools 10\" Laser Kerf Saw Blade \u0026amp; Splitter, 5\/8\" Arbor' href=\"https:\/\/infinitytools.com\/products\/infinity-tools-10-laser-kerf-saw-blade-splitter-5-8-arbor\" target=\"_blank\"\u003eLaser Thin-Kerf saw blade (010-046)\u003c\/a\u003e. Install the stainless steel kerf splitter for safer cuts when ripping stock to width. Measure just under a 1\/16\" thick, use as shown in the pics. Takes only minutes to set up. Includes splitter and wood screws.\u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847565627681,"sku":"TKS-001","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/tks-001_base_1.jpg?v=1721744707"},{"product_id":"incra-miter-1000hd-180-anglelock-stops","title":"INCRA Miter 1000HD - 180 AngleLOCK Stops","description":"\u003ch4 style=\"text-align: left;\" align=\"center\"\u003eINCRA MITER 1000HD - Sharpen Your Table Saw's Focus With 180 Indexing Stops!\u003c\/h4\u003e\n\u003cp\u003eThe NEW INCRA Miter 1000HD is a highly accurate, compact solution for general woodworking featuring an 18\"-31\" telescoping fence, INCRA Flip Shop Stop, 180 positive angle stops, and a 1\/10° vernier cursor. The adjustable miter bar fits 3\/8\" deep miter slots measuring between 0.740\" and 0.765\" wide. This new Miter Gauge is the most refined model in our lineup. The HD stands for High Definition owing to the fact that the protractor's plate has an incredible 180 can't-miss angle stops in 1 ° increments with special stops at 22.5° Combine that high-resolution protractor with the industry's smoothest adjustable miter bar, a telescoping IncraLOCK Cut-off Fence \u0026amp; Flip Shop Stop, and a steel vernier scale that reads to 1\/10 degrees, and you've got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will allow you to precisely set and quickly duplicate any angle you might need, whether it's 18\" for cutting 10 sides, 25.7 degrees for 7-sided objects, or anything else imaginable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe Miter 1000HD Features;\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlideLOCK adjustable miter bar will fit any standard table saw\u003c\/li\u003e\n\u003cli\u003eINCRA-LOCK fence telescopes from 18\" to 31\"\u003c\/li\u003e\n\u003cli\u003eDual Flip Shop Stop Positioner with Incra's patented automatic positioning control\u003c\/li\u003e\n\u003cli\u003e180 Indexed Angle Stops every 1 ° over 180° range with special stops at 22-1\/2° and 67-1\/2°\u003c\/li\u003e\n\u003cli\u003eIncredible 1\/10th° resolution between stops with the vernier cursor\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Solid Steel Protractor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847567462689,"sku":"IMG-004","price":219.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bl_100hd_1.webp?v=1705896986"},{"product_id":"10-tablesaw-set-up-sanding-plate-only","title":"Infinity Tools 10\" Tablesaw Set-up \u0026 Sanding Plate Only","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eTurn Your Table Saw Into A Setup \u0026amp; Sanding Station!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur Setup \u0026amp; Sanding disk makes table, radial and miter saws more accurate and useful. This disk is laser cut from the same premium steel plate that we use for our saw blades and is guaranteed to be within .002\" flat. It will allow you to fine-tune your saw for perfectly efficient and clean cuts. It's perfect for checking the arbor for square, setting your miter gauge to the precise angle or stick on our \u003ca href=\"http:\/\/www.infinitytools.com\/Table-Saw-Sanding-Disks-10\/products\/1689\/\" target=\"_blank\"\u003eNEW 10\" Hook \u0026amp; Loop Sanding Disks\u003c\/a\u003e and turn your saw into a super disk sander!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMajor benefits include;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck saw for alignment\u003c\/li\u003e\n\u003cli\u003eCheck arbor for runout\u003c\/li\u003e\n\u003cli\u003eUse as convenient sanding station for angled parts\u003c\/li\u003e\n\u003cli\u003eExtra fine polish allows easy removal and changing of sanding disks\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.infinitytools.com\/Table-Saw-Sanding-Disks-10\/products\/1689\/\" target=\"_blank\"\u003eAccepts our new 10\" Hook \u0026amp; Loop Sanding Disk System \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe plate measures 10\" x 1\/8\" thick and has a 5\/8\" arbor hole.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.infinitytools.com\/Table-Saw-Sanding-Disks-10\/products\/1689\/\" target=\"_blank\"\u003e\u003cspan class=\"style1\"\u003eNEW\u003c\/span\u003e - Click here to see our Table Saw Setup \u0026amp; Sanding Disk Premium Package, item 00-SSD\u003c\/a\u003e\u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847568347425,"sku":"SSD-010","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/ssd-010_base.webp?v=1705897267"},{"product_id":"incra-miter-v27-with-27-anglelock-stops","title":"INCRA Miter V27 - with 27 AngleLOCK Stops","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eThe INCRA Miter V27 Miter Gauge is engineered to provide a high performance, low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all INCRA Miter Gauges, the V27 delivers extreme miter cutting accuracy through the advanced combination of INCRA's exclusive AngleLOCK indexing system and its patented Adjustable GlideLOCKMiter Bar. While the V27 delivers all of the accuracy of its bigger INCRA Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable Incra Miter Gauge.\u003c\/p\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847570641185,"sku":"IMG-001","price":79.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/img-001_feed_2.webp?v=1705896980"},{"product_id":"micro-jig-grr-ripper-handle-bridge-kit","title":"MicroJIG GRR-Ripper Handle Bridge Kit","description":"\u003cp\u003eSimply put, the MJ Handle Bridge improves the control of the GRR-Ripper and reduces the amount of handle adjustments.  Great for comfort and ergonomic handle positions. A useful and convienient accessory that allows you to place the handle of the GRR-Ripper exactly where it is most comfortable for your specific cut.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571263777,"sku":"MJG-206","price":15.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-206_base_1.webp?v=1705897011"},{"product_id":"microjig-zero-play-guide-bar-system-2-bars-2-stops","title":"MicroJIG Zero Play Guide Bar System (2 Bars \u0026 2 Stops)","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003ch3 align=\"center\"\u003eNo More Hardwood Guides - Year Round Precision Regardless Of The Weather!\u003c\/h3\u003e\n\u003cp\u003eThe ZeroPlay Guide Bar is a “One-Touch Calibration” miter bar (9 ½” in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot for a perfect fit and smooth glide, even fits tricky Shopsmith™ or General’s miter slots. The old method of making guide bars out of wood (yes, even plywood) is a thing of the past. The \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eMicroJIG\u003c\/span\u003e Zero Play system won't swell and shrink with seasonal humidity.\u003c\/p\u003e\n\u003cp\u003eOur full ZeroPlay Guide Bar System comes with two bars and two stops. This package is great for serious woodworkers who build multiple jigs and recognize the value of a simple, exact, and trustworthy miter bar. Great for replacing your current runners or building new ZeroPlay Jigs. If you're feeling creative, use two ZeroPlay Guide bars in tandem for building larger, more elaborate, jigs as well.\u003c\/p\u003e\n\u003ch3\u003eFeatures Include:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCreate\u003c\/strong\u003e perfectly square cross cut jigs WITHOUT any trial and error set-screw adjustment along the miter bar\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasily\u003c\/strong\u003e square jig to the blade adjustment while securing through the top of the sled - Top Down Installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e small cut-off jig easy to carry and store, or build large jig with ZeroPlay Guide Bars in tendon with custom spacing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplace \u003c\/strong\u003eworn and warped wood runners and aluminum bars that can be a hassle to calibrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetro-Fit \u003c\/strong\u003eyour existing cross-cut jigs for improved precision\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccurately\u003c\/strong\u003e check alignment of saw blade to the miter slot with a dial-indicator (not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e your own unique jig or jigs with included plan\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZeroPlay Stops \u003c\/strong\u003eserve as an anchor for your clamping devices within the miter slot – shop build clamp plan included\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e table saw coving fence with the ZeroPlay Stop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZeroPlay Stops\u003c\/strong\u003e limit the travel distance for specialty jig\u003c\/p\u003e\n\u003ch3 align=\"center\"\u003e\u003cstrong\u003eClick \u003ca href=\"..\/PDF\/MicroJigZPS.pdf\"\u003ehere\u003c\/a\u003e to read the complete WOOD Magazine review.\u003c\/strong\u003e\u003c\/h3\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571394849,"sku":"MJG-ZPS","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-zps_base.webp?v=1705897022"},{"product_id":"incra-i-box-box-joint-jig-with-infinity-tools-3-pc-flat-top-blade-package","title":"Incra I-BOX - Box Joint Jig with Infinity Tools 3-Pc. Flat Top Blade Package","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eExclusive Package - Incra's I-Box Jig Plus Our 3-Pc. Flat Top Blade Package!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis package includes the Incra I-Box jig plus our exclusive Flat Top Saw Blade Set, item 080-002. Allows you to quickly and easily set up for cutting box joints with 5\/32\", 3\/8\" and 1\/4\" pin widths on your table saw.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"mso-bidi-font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Calibri;\"\u003eTo get right to the point, the \u003cspan style=\"font-weight: bold;\"\u003e\u003cspan style=\"font-style: italic; text-decoration: underline;\"\u003enew\u003c\/span\u003e INCRA I-Box\u003c\/span\u003e is the most advanced tool ever produced for creating a stunning variety box joints \u0026amp; finger joints. It features fast setup for basic joints, plus advanced capability for unique decorative joints. \u003c\/span\u003eIts revolutionary design allows greater versatility and improved user safety compared to traditional jigs. \u003cspan style=\"line-height: 115%;\"\u003e This single jig can be used on both your table saw and your router table, and the I-Box's dual-pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1\/8\" - 3\/4\" range of pin widths \u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003ein lumber up to 1\" thick\u003c\/span\u003e\u003cspan style=\"line-height: 115%;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe advantages continue beyond the basics:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eINCRA I-Box-exclusive box joints like the Center Keyed Box Joint can be used to produce symmetric patterns on a wider variety of lumber widths than traditional jigs, making it easier to adapt box joints to existing project plans. Taking the Center Keyed joint a step further, the Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects.\u003c\/p\u003e\n\u003cp\u003eAs a bonus, the I-Box can even be used to produce classic dentil moldings! Altering the spacing between cuts and height of the cutter lets you change the moulding's proportions to create a nearly infinite variety\u003cspan style=\"background-color: #ffffff; color: #006093;\"\u003e\u003cspan style=\"background-color: #ffffff;\"\u003e\u003cspan style=\"background-color: #ffffff; color: #000000;\"\u003e. And \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003eNothing says \"Craftsmanship\" like adding solid wood hinges to your projects. The I-Box can be used in conjunction with the \u003c\/span\u003e\u003cspan style=\"line-height: 14px; color: #000000;\"\u003eINCRA HingeCrafter\u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003e to produce wooden hinges in four different barrel diameters and in lengths up to 10\". \u003c\/span\u003e And to make sure you get to use all of the jigs' awesome features, we've include a 1-hour instructional DVD that covers everything from basic setup to advanced decorative joinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe INCRA I-Box is packed with innovative features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it on your table saw or router table to cut great looking box joints with a \u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.com\/products\/8-dadonator-xl\" target=\"_blank\"\u003estacking-type dado blade,\u003c\/a\u003e \u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.com\/products\/4pc-thick-kerf-flat-top-saw-blade-package-5-8-arbor\" target=\"_blank\"\u003ededicated box joint blade set,\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/infinitytools.com\/products\/straight-router-bits?_pos=1\u0026amp;_sid=a6e86a120\u0026amp;_ss=r\" target=\"_blank\"\u003estraight router bits. \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReversible design works on either side of the cutter \u003cspan style=\"text-align: left; line-height: 115%;\"\u003eExclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1\/8\" - 3\/4\" range of pin widths.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExclusive INCRA GlideLOCK miter bar fits standard 3\/4\" x 3\/8\" miter slots with a 0.740\" - 0.762\" adjustment range\u003cspan style=\"line-height: 115%;\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eFront and rear blade guards; front guard also stabilizes boards vertically and is adjustable for 1\/8\" to \u003c\/span\u003e\u003cspan style=\"line-height: 14px;\"\u003e1\" lumber thicknesses for box joints or even thicker for other applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eThe wide fence allows clamping lumber securely into position while cutting much better than hand-holding boards, especially when joining small or large lumber (hand screw clamp not included).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-align: left; line-height: 115%;\"\u003eReversible \u0026amp; reusable MDF sub fence dramatically reduces or eliminates tea rout\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eThis exclusive package combines the Incra I-Box jig plus our \u003ca href=\"https:\/\/infinitytools.com\/products\/3pc-thick-kerf-flat-top-saw-blade-package-5-8-arbor\" rel=\"noopener\" target=\"_blank\"\u003e080-002\u003c\/a\u003e Flat Top Saw Blade package.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847571525921,"sku":"BJJ-004","price":499.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bjj-004_feed.webp?v=1705897731"},{"product_id":"micro-jig-grr-rip-smart-hook-push-block","title":"MicroJIG GRR-RIP Smart Hook Push Block","description":"\u003cp\u003e\u003cstrong\u003eGRR-RIP BLOCK - The Smart Choice For Safety In Your Shop!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Micro Jig GRR-RIP BLOCK features the innovative Green GRR-RIP nonslip pad and Smart Gravity Heel to give you total control over your workpiece. GRR-RRIP Block's drop-down heel hooks are there when you need them and instantly retract when you don't. GRR-RIP BLOCK gives you improved control for freehand routing while keeping your hands clear and away from the spinning router bit. We recommend adding the optional MJ Deflector\/Connector accessory (Item: MJG-208) for the ultimate protection against flying debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Use With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJointers\u003c\/li\u003e\n\u003cli\u003eBand Saws\u003c\/li\u003e\n\u003cli\u003eRouter Tables\u003c\/li\u003e\n\u003cli\u003eShapers\u003c\/li\u003e\n\u003cli\u003eTable Saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore features of the GRR-RIP Block include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReversible ergonomic handle is angled for all-day woodworking comfort\u003c\/li\u003e\n\u003cli\u003eUnique Green GRR-RIP ® nonslip pad has a super-grip on your material\u003c\/li\u003e\n\u003cli\u003eGravity actuated hooks drop down automatically to grab the end of a board\u003c\/li\u003e\n\u003cli\u003eHooks instantly retract when the pushblock grips a material surface\u003c\/li\u003e\n\u003cli\u003e90° flip guide for veneering or resawing on your bandsaw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847571853601,"sku":"MJG-201","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-201_add-5.webp?v=1742996662"},{"product_id":"thin-rip-guide-for-table-saw-bandsaw-router-table","title":"Infinity Tools Thin-Rip Guide For Table Saw, Bandsaw \u0026 Router Table","description":"\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eEasy, Repeatable \u0026amp; Precise - Get Perfect Thin Rip Cuts On Your Table Saw \u0026amp; More!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOur Thin Rip Table Saw Guide makes repetitive ripping of thin strips safer, more accurate and faster than before. Since the strips come off of the left side of the saw blade, there is no burning, binding or kickback. Manufactured from a solid piece of aluminum and beautifully finished, the guide locks itself into any 3\/4\" wide x 3\/8\" deep miter slot. The built-in scale features a 1\/8\" graduation for extra-fine adjustments. The ball bearing holds the stock firmly against the fence while it's smooth operation allows effortless feeding.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe Thin Ripping Guide is very easy to use and perfect for your Table Saw, Band Saw and Router Table. Simply set your desired strip thickness, make your cut, reposition the fence so your stock rides against the ball bearing and repeat. You can also position the guide on the right side of the saw blade to make repeated cross cuts using a miter gauge. You'll find many uses for the guide on your bandsaw as well. Instructions included.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use on your Table Saw, Band Saw and Router Table\u003c\/li\u003e\n\u003cli\u003eSolid aluminum construction for years of service\u003c\/li\u003e\n\u003cli\u003e6\" long scale\u003c\/li\u003e\n\u003cli\u003e1\/8\" graduated scale for fine adjustments\u003c\/li\u003e\n\u003cli\u003eAdjusts from 1-13\/16\" away from your miter track to 5-13\/16\" away from your miter track\u003c\/li\u003e\n\u003cli\u003eFits 3\/4\" x 3\/8\" miter tracks\u003c\/li\u003e\n\u003cli\u003eSmooth action ball bearing for super smooth ripping action\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSafety first:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a \u003ca href=\"https:\/\/infinitytools.com\/collections\/infinity-tools-zero-clearance-inserts-z-c-i\" target=\"_blank\" title=\"Infinity Tools Zero Clearance Inserts (Z.C.I.)\" rel=\"noopener\"\u003eZero Clearance Insert\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse a push stick\u003c\/li\u003e\n\u003cli\u003eUse a riving knife or splitter\u003c\/li\u003e\n\u003cli\u003eUse you saw's blade guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFor optimal results on your table saw, we recommend the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck to make sure your fence is parallel (or with slight toe-out) relative to your saw blade.\u003c\/li\u003e\n\u003cli\u003eUse a Thin Kerf blade to maximize stock yield.\u003c\/li\u003e\n\u003cli\u003eDon't use stock which is already narrow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847573066017,"sku":"TRG-001","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/trg_main_1.webp?v=1705897278"},{"product_id":"precision-miter-bar-9-7-8-x-3-4-x-3-8-thick","title":"Infinity Tools Precision Miter Bar - 9-7\/8\" x 3\/4\" x 3\/8\" Thick","description":"\u003cp style=\"text-align: left;\" align=\"center\"\u003e\u003cstrong\u003ePrecision Miter Bar With Adjustable Spring Plungers - Fits Standard 3\/8\" x 3\/4\" Miter Slots\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis universal plunger-style miter bar is a high quality accessory that is perfect for custom fixture making and more. The spring loaded side plungers remove any slop between the miter bar and your miter track. The plungers also allow the miter bar to effortlessly glide inside the miter track. This gives you a high level of accuracy that is very important when making precision jigs and fixtures. The round disk at the end of the bar allows you to \"lock\" your fixtures in place. Removable when using regular U channel tracks.\u003c\/p\u003e\n\u003cp\u003eWe developed this miter bar specifically for use with our new and improved Professional Coping Sled, COP-200,  but it can be used for any custom fixture in your shop. For ultimate flexibility, our steel miter bar attaches to the base of the sled in one of two positions, allowing you to keep the sled further or closer to the cutter. Our miter bar allows you to use the Professional Coping Sled in your router table, shaper table, table saw or any machine in your shop that accepts a 3\/4\" miter bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpring loaded ball bearing plungers give precision and smooth action\u003c\/li\u003e\n\u003cli\u003eRound disk at end of bar allows it to \"lock\" in place when using T-miter tracks.\u003c\/li\u003e\n\u003cli\u003eAlso fits in standard U-Track\u003c\/li\u003e\n\u003cli\u003eMeasures 9-7\/8\" long x 3\/4\" wide\u003c\/li\u003e\n\u003cli\u003eHardened steel and powder coated\u003c\/li\u003e\n\u003cli\u003eDrilled holes specifically for attaching to our new COP-200\/201 sleds.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847573492001,"sku":"COP-MB1","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/vop-mb1_1.jpg?v=1723475955"},{"product_id":"infinity-tools-saw-blade-stabilizer-5-5-8-bore-sold-as-pair","title":"Infinity Tools Saw Blade Stabilizer 5\", 5\/8\" Bore - Sold as Pair","description":"\u003cp\u003eA vibrating saw blade can produce ragged cuts, ear-splitting noise, and lots of frustration for you. Our Precision saw Blade Stabilizers improve the quality of cut by reducing vibration produced by your saw's motor, belts, and bearings. They also dramatically reduce blade deflection, resulting in quieter, more accurate cutting. Use the 5\" stabilizers for 10\" diameter saw blades. Stabilizers are bored for 5\/8\" arbors and are not designed for use on portable saws. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow with our exclusive Chrome-Armor plating!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJust like all Infinity tools saw blades, each pair of 5\" Saw Blade Stabilizers now feature our Chrome-Armor plating to eliminate corrosion and make them easier to keep clean and free sawdust and buildup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847576375585,"sku":"STA-500","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/sta-500_1_pn.webp?v=1705897270"},{"product_id":"infinity-tools-joint-jig-package-with-1-4-kerf-flat-top-blade-and-setup-block-kit","title":"Infinity Tools Box Joint Jig Package with 1\/4\" Kerf Flat Top Blade and Setup Block Kit","description":"\u003cp\u003eA lot of things are clever, but this Box Joint Jig set is ingenious. If you've been making box joints on the table saw or router table with your standard cross-cut sled, then you know just how annoying it is to have to set up stop-blocks at exactly the right location to ensure the correct distance between the joint's fingers. With this package, the guesswork is gone. Use the spacers in our Box Joint Setup Block Kit to set up the spacing between the blade and key, and the width of the key.\u003c\/p\u003e\n\u003cp\u003eThis set also comes with our 1\/4\" kerf flat top blade, so you know that your joints will be absolutely square every single time.\u003c\/p\u003e\n\u003cp\u003eMade with a pair of sacrificial face plates mounted on an aluminum Ultra Track, this jig allows you to create a zero-clearance cut for multiple kerf widths on your table saw or router table. Throw in the lifetime guarantee against defects and picking up this pain-saving jig is a no brainer.\u003c\/p\u003e\n\u003cp\u003e*Color and material of sacrificial face plates may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli id=\"features2\"\u003eOne \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-box-joint-jig-for-router-table-table-saw\" target=\"_blank\" title=\"Box Joint Jig\" rel=\"noopener\"\u003eBox Joint Jig for Router Table \u0026amp; Table Saw (BJJ-001)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne \u003ca href=\"https:\/\/infinitytools.com\/products\/infinity-tools-8-flat-top-dado-saw-blade-5-8-bore\" target=\"_blank\" rel=\"noopener\"\u003e8\" x 1\/4\"Kerf Flat Top Blade (080-250)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne \u003ca href=\"https:\/\/infinitytools.com\/products\/5-pc-setup-block-kit-for-box-joint-jig-bjj-001?_pos=1\u0026amp;_sid=79ab6e792\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003e5-Pc. Setup Block Kit For Box Joint Jig (BJJ-001.UK)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCuts any box joint between 1\/8\" to 13\/16\" wide and 1-5\/8\" deep.\u003c\/li\u003e\n\u003cli id=\"features\"\u003eWorks on a table saw or router table.\u003c\/li\u003e\n\u003cli\u003eAttaches to any miter gauge (not included).\u003c\/li\u003e\n\u003cli id=\"features\"\u003eAdjustable pins prevent part slippage.\u003c\/li\u003e\n\u003cli id=\"features\"\u003eLifetime guarantee against defects in material or workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce setup time to cut perfect box joints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847578997025,"sku":"BJJ-000","price":239.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bjj-000_base.webp?v=1705898163"},{"product_id":"micro-jig-grr-ripper-gravity-heel-kit","title":"MicroJIG GRR-Ripper Gravity Heel Kit","description":"\u003cp\u003e\u003cstrong\u003eMicro Jig GRR-Ripper Gravity Heel Kit: Save your Double-A's\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe new Gravity Heel Kit for Micro Jig's GRR-Ripper (item: MJG-200) works so well you'd think it ran on batteries. This device allows a seamless transition for your GRR-Ripper from flat pushing block to a rear-pressure pushing stick when working at the table saw, router table, bandsaw or the jointer. The heel drops into place when you need it, then lifts away when you don't.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eFully adjustable from 0-1\", this gravity operated heel accessory has been designed to double as a sacrificial component to your GRR-Ripper if you so need, so feel free to use it as a backing block when cutting end grain joints to prevent tear-out.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThe new Gravity Heel virtually eliminates tear-out and increases control and stability when feeding short or long stock on the table saw. It provides a secure backing on routing operations preventing blowout and can also be used as a template for repeat routing. The Gravity Heel is perfect for use with long stock on jointers. The Gravity Heel is there when you need it and gets out of the way when you don't.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003e5 Gravity Heels\u003c\/li\u003e\n\u003cli\u003e2 Heel Spacers\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware to fit any existing GRR-Ripper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses in your shop:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eUse with any existing GRR-Ripper to improve safety and cut quality at the table saw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847583093025,"sku":"MJG-199","price":16.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/mjg-199_base.webp?v=1705898460"},{"product_id":"incra-i-box-box-joint-jig-with-infinity-tools-1-4-kerf-flat-top-blade","title":"Incra I-BOX - Box Joint Jig with Infinity Tools 1\/4\" Kerf Flat Top Blade","description":"\u003cstyle type=\"text\/css\"\u003e\n\u003c!--\nbody {\n\tmargin-left: 0px;\n\tmargin-top: 0px;\n\tmargin-right: 0px;\n\tmargin-bottom: 0px;\n}\n--\u003e\n\u003c\/style\u003e\n\u003cp align=\"center\" style=\"text-align: left;\"\u003e\u003cstrong\u003eThe Incra I-BOX Jig Makes Beautiful Box Joints, Fast \u0026amp; Easy!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo get right to the point, the INCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints \u0026amp; finger joints. It features fast setup for basic joints, plus advanced capability for unique decorative joints. Its revolutionary design allows greater versatility and improved user safety compared to traditional jigs. This single jig can be used on both your table saw and your router table, and the I-Box's dual-pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1\/8\" - 3\/4\" range of pin widths in lumber up to 1\" thick.\u003c\/p\u003e\n\u003cp\u003eThe advantages continue beyond the basics: INCRA I-Box-exclusive box joints like the Center Keyed Box Joint can be used to produce symmetric patterns on a wider variety of lumber widths than traditional jigs, making it easier to adapt box joints to existing project plans. Taking the Center Keyed joint a step further, the Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects.\u003c\/p\u003e\n\u003cp\u003eAs a bonus, the I-Box can even be used to produce classic dentil moldings! Altering the spacing between cuts and height of the cutter lets you change the moulding's proportions to create a nearly infinite variety. And Nothing says \"Craftsmanship\" like adding solid wood hinges to your projects. The I-Box can be used in conjunction with the INCRA HingeCrafter to produce wooden hinges in four different barrel diameters and in lengths up to 10\". And to make sure you get to use all of the jigs' awesome features, we've include a 1-hour instructional DVD that covers everything from basic setup to advanced decorative joinery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe INCRA I-Box is packed with innovative features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it on your table saw or router table to cut great looking box joints with a \u003ca href=\"http:\/\/www.infinitytools.com\/Dadonator-8-Stacked-Dado-Set-With-5_8-Bore\/productinfo\/SDB-800\/\" target=\"_blank\"\u003es\u003c\/a\u003etacking-type dado blade, dedicated box joint blade set, or \u003ca href=\"http:\/\/www.infinitytools.com\/Straight-Router-Bits\/products\/1054\/\" target=\"_blank\"\u003estraight router bits.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eReversible design works on either side of the cutter Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1\/8\" - 3\/4\" range of pin widths.\u003c\/li\u003e\n\u003cli\u003eExclusive INCRA GlideLOCK miter bar fits standard 3\/4\" x 3\/8\" miter slots with a 0.740\" - 0.762\" adjustment range.\u003c\/li\u003e\n\u003cli\u003eFront and rear blade guards; front guard also stabilizes boards vertically and is adjustable for 1\/8\" to 1\" lumber thicknesses for box joints or even thicker for other applications.\u003c\/li\u003e\n\u003cli\u003eThe wide fence allows clamping lumber securely into position while cutting much better than hand-holding boards, especially when joining small or large lumber (hand screw clamp not included).\u003c\/li\u003e\n\u003cli\u003eReversible \u0026amp; reusable MDF sub fence dramatically reduces or eliminates tea rout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Infinity Cutting Tools","offers":[{"title":"Default Title","offer_id":46847583125793,"sku":"BJJ-003","price":369.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/bjj-003_feed.webp?v=1705897729"},{"product_id":"microjig-microdial-tapering-jig-table-saw-router-table","title":"MicroJIG Microdial Tapering Jig - Table Saw \u0026 Router Table","description":"\u003ch3\u003ePrecision Tappered Cuts On Your Table Saw Or Router Table\u003c\/h3\u003e\n\u003cp\u003eTables and chairs are just a few of the fine furniture projects that require tapered legs and tops. But most of us have been trained to set up our table saw to achieve perfectly straight, non-tapered cuts. Fortunately, a tapered cut is just a straight cut that is on an angle.\u003c\/p\u003e\n\u003cp\u003eAdjustable style jigs are built with two straight fences attached in the back by a pivoting hinge which allows you to make different angled cuts. When using this style of taper jig your material rests against a stop block in the back and is not secured to your fixture. This requires you to push your jig and material through the cut while simultaneously applying side pressure to hold your stock against the jig, not an ideal scenario. And forget making narrow tapered furniture legs with this style of jig, your fingers just can't push and hold the stock and be far enough away from the saw blade to make this type of cut safely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Micro Jig Microdial Taper jig takes tapered cuts to a whole new level of safety, accuracy, and speed. Now you can cut tapers with surgical precision using the intuitive COLORMATCH system which ensures the angle of your taper to 1\/8th of a degree (incrementally up to 10 degrees) so you can work with precision.\u003c\/li\u003e\n\u003cli\u003eThe built-in MEMORYLOCK technology maintains two independent stops so you can switch quickly and easily between two tapers on a single workpiece and work faster.\u003c\/li\u003e\n\u003cli\u003eAnd that’s just the start; the Microdial's versatile design coupled with the GRR-Ripper's control and protection allows you to feed table legs in a whole new way. By using the precision gauge, you can accurately create unique and uncommon table legs with up to 8 tapered sides. Combine the Microdial Tapering Jig with 1 or 2 \u003ca href=\"https:\/\/infinitytools.com\/products\/micro-jig-grr-ripper-advanced-model-200?_pos=1\u0026amp;_sid=2accdda5f\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eGRR-Ripper Advanced Model 200's\u003c\/a\u003e to craft impeccably tapered legs. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe MICRODIAL Tapering Jig gives you the ultimate precision when cutting tapered panels on the table saw too. Perfect for tapering large panels for table tops, small tapered panels for table aprons or lamps, and even making unique tapered pepper mills.\u003c\/p\u003e","brand":"MicroJIG","offers":[{"title":"Default Title","offer_id":46847583453473,"sku":"MJG-198","price":129.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/MJG-198_c.jpg?v=1711637139"},{"product_id":"incra-miter-5000-table-saw-crosscut-sled","title":"INCRA Miter 5000 Table Saw Crosscut Sled","description":"\u003cp\u003e\u003cstrong\u003eAccurate \u0026amp; Repeatable Table Saw Cuts Guaranteed!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Incra Miter 5000 is the ultimate table saw upgrade. Accurate, repeatable cuts are a sure thing. It provides clamping points for securing your work, a long solid fence for cutting all those long pieces, and a table that provides zero clearance accuracy for tear-out free cuts of every type.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures Of The Incra Miter 5000 Include:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eINCRA Hold Down Clamp - Included with every Miter 5000 is this simple and incredibly useful Hold Down Clamp which locks your workpiece onto the sled for maximum accuracy and the cleanest cuts possible. It only takes seconds to use and provides the rigidity needed for world class results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlideLOCK Miter Bar - The expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3\/4\" x 3\/8\" or near-standard miter gauge channels, including Delta, Craftsman, imports, etc. The miter bar's adjustment range accommodates actual slot widths between 0.740\" and 0.760\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial Edition Telescoping INCRA-LOCK Fence - This Special Edition Miter Fence telescopes from 36\" to a full 64\" length. Includes the Dual Flip Shop Stop and INCRA's patented Automatic Positioning Control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAngleLOCK Indexing - The Incra 3000SE Miter Gauge features precision angle indexing teeth that are laser cut in solid steel to lock in 364 positive angle stops in 1\/2, 1 or 5 degree increments over a full 180 degree range. It's also continuously adjustable between 1\/2 degree steps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Incra","offers":[{"title":"Default Title","offer_id":46847590924577,"sku":"IMG-005","price":399.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/files\/IMG-5000-a_sq.jpg?v=1727961935"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9622\/1217\/collections\/1_TableSaw.jpg?v=1705640475","url":"https:\/\/infinitytools.com\/collections\/table-saw-accessories-1.oembed?page=4","provider":"Infinity Cutting Tools","version":"1.0","type":"link"}