Question 1

What speed is optimum for this set? View answer

Asked 6 ´years ago | Broca para enrutador del siglo XVII con vástago de 1/2" de Infinity Tools, moldura de base

Question 2

For a 20” table saw, does it matter which Pro-Grip edge clamp size I order? View answer

Asked 6 ´years ago | Infinity Tools 2" Wide Pro-Grip Straight Edge Clamps

Question 3

Do you have this bit (Three-in-one), or any bit with this profile, with a 25 to 30 degree angle. View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Three-in-One Router Bit

Question 4

What are the model numbers for the Mirka Dust-Free Sanding System components? Shipping cost to Seattle? View answer

Asked 6 ´years ago | Mirka Dust-Free Sanding System Deros Sander Coaxial Vacuum Hose

Question 5

Do you have the router holder that holds the router in place when you crank the router up and down? View answer

Asked 6 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 6

Does the aluminum insert plate fit older tables and can it be purchased separately? Is it a good upgrade? View answer

Asked 6 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 7

How much extra material should be planned when cutting 3/4" thick stock with a 22.5° Lock Miter Bit Set? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank 22.5° Lock Miter Router Bit Set w/ Setup Block

Question 8

Where is the Dadonator made? View answer

Asked 6 ´years ago | Infinity Tools Dadonator Jr., 6" Stacked Dado Saw Blade Set

Question 9

Does this work on carbide blades? View answer

Asked 6 ´years ago | Deulen 6" Jointer Knife Sharpener - For Knives Up To 8" Long

Question 10

My iGaging Angle Cube only reads zero. Is there a reset needed to fix this issue? View answer

Asked 6 ´years ago | Guía de ángulos digital iGaging Angle Cube

Question 11

Which Rosette Cutter is shown on page 51 of your flyer? Which bead bit is paired with it for straight cuts? View answer

Asked 6 ´years ago | Infinity Tools Carbide Tipped Rosette Cutters, 2-3/4"" Diameter

Question 12

Where are the 10" Super General thin kerf blades manufactured? View answer

Asked 6 ´years ago | Infinity Tools 10" Super General Combination Table Saw Blade

Question 13

Is the plate thickness of the 010-045 thin kerf blade suitable for my Skilsaw worm-drive contractor saw, which requires a minimum of 0.088”? View answer

Asked 6 ´years ago | Infinity Tools 10" Super General Combination Table Saw Blade

Question 14

size? View answer

Asked 6 ´years ago | Two-Sided Mobile Clamp Rack Plans

Question 15

I would like to know if the table is all phenolic. View answer

Asked 6 ´years ago | Infinity Tools Pro Router Table Package with Triton 3-1/4 HP Router (TRA001)

Question 16

What is the rail/stile slot width for your bit set? I need to match acrylic panels for cabinet doors. View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Matched Rail & Stile Router Bits

Question 17

Will your setup master jig work with a Freud lock miter shaper cutter? View answer

Asked 6 ´years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 18

I use a lot of baltic birch plywood for drawers. Does the Lock Miter bits produce excessive tear-out issues? View answer

Asked 6 ´years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 19

hello I am looking for planer blades for a Powermatic 412 View answer

Asked 6 ´years ago | Infinity Tools High Speed Steel Planer & Jointer Knives, 1/8" Thick, 3-Pc. Sets

Question 20

I bought a Triton 3 1/4 hp router. Need help finding a quality lift table insert. Thanks for your assistance. View answer

Asked 6 ´years ago | JessEm Mast-R-Lift II - 8-1/4" x 11-3/4" Aluminum Plate

Question 21

Shaper cutters need a 3/4” spindle. Can you advise where to find one or how to return the cutters if needed? View answer

Asked 6 ´years ago | Infinity Tools Shape-Up Radius Backcutter Shaper Cutter, 3/4" Bore

Question 22

Are the sanding disks aluminum oxide? Do you sell a gizmo for fine-tuning a table saw using a caliper? View answer

Asked 6 ´years ago | Klingspor 10" Sanding Disk w/ 5/8" Arbor'

Question 23

Where can I find arbors for the 83-070 with a 3/4” spindle hole? I can't find anything that fits. View answer

Asked 6 ´years ago | Infinity Tools Rabbeting Shape-Up Shaper Cutter

Question 24

I’m looking at a spray booth for a big project. Are there vents at the bottom? Can it adapt to a low airflow box fan? View answer

Asked 6 ´years ago | HomeRight Portable Spray Booths

Question 25

For Ivac systems, what’s the solution for 3-phase tools? How can I make the system compatible with my setup? View answer

Asked 6 ´years ago | Contactor iVac; disparador de 115 V CA; capacidad de 10 HP

Question 26

Can I add more tracks to this saw set to cut 4' X 8' sheets of plywood? If so, what are the part #s and cost? View answer

Asked 6 ´years ago | Triton Track Saw With Track Pack & Clamps

Question 27

Will this fit the rockleer router table without modification View answer

Asked 6 ´years ago | JessEm Rout-R-Lift II

Question 28

Are these made in the USA? View answer

Asked 6 ´years ago | Narex Premium Hand Stitched Rasp

Question 29

What is the total thickness of the football tray, and how should I attach the laces to the wood? View answer

Asked 6 ´years ago | Infinity Tools Football Tray Making Template

Question 30

Do you sell longer lengths of your Anti-Static PVC Dust Collection Hoses? View answer

Asked 6 ´years ago | Anti-Static PVC Dust Collection Hose, 10 Feet.

Question 31

It would be helpful to know the size of the inlays to determine if they are appropriate for the project. View answer

Asked 6 ´years ago | Infinity Tools Light House - Multi-Layer Inlay System

Question 32

the dragonfly inlay template appears to be able to make 3 different sizes of dragonfly, how is this done? View answer

Asked 6 ´years ago | Infinity Tools Dragonfly - Multi-Layer Inlay System

Question 33

How much does an electric branding iron with my signature cost? How do I submit my signature for customization? View answer

Asked 6 ´years ago

Question 34

Do you have frame making router bits with an 8mm shank View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Picture & Frame Making Router Bits

Question 35

What is height and width of completed tree ? View answer

Asked 6 ´years ago | Infinity Tools Bonsai - Multi-Layer Inlay System

Question 36

When you buy a plane is the blade already sharpen. View answer

Asked 6 ´years ago | Cepillo de mano para fregar madera Infinity Tools

Question 37

Do the wooden skewed rabbit planes have a nicker for slicing into the corner against the wall of the rabbit? View answer

Asked 6 ´years ago | Infinity Tools Double Rabbet Wood Hand Plane

Question 38

I bought the Celtic Knot but am confused about the order and rotation. Can you assist with this? View answer

Asked 6 ´years ago | Infinity Tools Celtic Knot - Multi-Layer Inlay System

Question 39

I?m new to dado blades. With the MDS-PK2 set, does expanding it require specifying a particular mating blade? View answer

Asked 6 ´years ago | Tope para dados MicroJIG MATCHFIT

Question 40

Does this bit require a 31/2 hp motor? Or will my Bosch 1617evs motor be sufficient? View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Dado Router Bit

Question 41

Do you sell these products in The Netherlands? View answer

Asked 6 ´years ago | Armor Tool 6-Pc Auto-Adjust Dog Hole Clamp Master Pack

Question 42

What type of sandpaper is it? View answer

Asked 6 ´years ago | Deulen Six Pack Sandpaper For Lapping Plate

Question 43

Can I use item 23-GLS with item 00-102 to build a cabinet door with glass that has a curved top rail? View answer

Asked 6 ´years ago | Infinity Tools Divided Light Door Kit For Rail & Stile Router Bit Sets

Question 44

Can the 03-500 router bit round over 3/4" stock without leaving square cuts, or is there a better bit for a full radius? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Thumbnail Router Bit

Question 45

Will this work with birch plywood that is slightly less than 3/4 inch? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Drawer Locking Router Bit

Question 46

What is the difference between the BJJ-002 and the BJJ-003 set? Do either come with the hinge attachment? View answer

Asked 6 ´years ago | Plantilla para juntas de caja Incra I-BOX con paquete de 3 cuchillas planas de Infinity Tools

Question 47

Are you making this saw in different sizes? I need a blade for a cordless 6 1/2” circular saw. View answer

Asked 6 ´years ago

Question 48

What size are the wood boards for 100-195? View answer

Asked 6 ´years ago | Infinity Tools 20-Pc. Assorted Wood Pack

Question 49

What is the bevel angle of the Narex Dovetail Chisels? View answer

Asked 6 ´years ago | Narex Dovetail Chisel, 1/2"

Question 50

Can I use this blade on a circular saw? View answer

Asked 6 ´years ago | Hoja de sierra de corte láser y divisor de 10" de Infinity Tools, eje de 5/8"

Browse by Topic

Tools