Question 1

Is this available without the 1-2-3 block? I already have two and just need the smaller spacers. View answer

Asked 6 ´years ago | Infinity Tools 8-Pc. Precision Tool & Project Setup Blocks

Question 2

Is the Inset Pro 45* Lock Miter Cutter available in 3/4 bore? View answer

Asked 6 ´years ago | Infinity Tools Insert-Pro 45° Lock Miter Shaper Cutter, 1-1/4" Bore

Question 3

what's the largest size crown I can make with this kit? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank 7-Pc. Master Crown Molding Router Bit Set

Question 4

will the mini power feeder fit on my laguna lt 16 hd bandsaw ? View answer

Asked 6 ´years ago | Infinity Tools Mini Power Feeder For Router Table & Shapers

Question 5

I need a bearing with a 5/16 ID for a 1/16 groove bit. Does Infinity make a kit with a 5/16 ID bearing? View answer

Asked 6 ´years ago | Infinity Tools 16-Pc. Ultimate Router Bit Bearing Kit - 3/16" I.D.

Question 6

the end fence seems not to be secured. is there something I am missing ? View answer

Asked 6 ´years ago | Kreg Accu-Cut and Rip-Cut Systems (KMA2685 & KMA2700)

Question 7

Is this a mechanical switch, not momentary or magnetic? I need a non-momentary paddle switch. View answer

Asked 6 ´years ago | Infinity Tools Power Tool Safety On & Off Switch

Question 8

What size collet wrench is used in a SawStop in-line roter lift? View answer

Asked 6 ´years ago | Infinity Tools Router Collet Offset Wrench For Porter Cable 1-1/8"

Question 9

Will your mitre lock set up jig work with large mitre bit by CMT? View answer

Asked 6 ´years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 10

Trying to find a collete sleeve that will fit 1/4" "hand-tite" chuck by Jacobs By any chance, will these fit? View answer

Asked 6 ´years ago | Infinity Tools 8mm x 1/2" x 1-1/4" Router Collet Reducing Sleeve

Question 11

Are connectors/clamps available for the 2 1/2" Dia. hoses? View answer

Asked 6 ´years ago | Anti-Static PVC Dust Collection Hose, 10 Feet.

Question 12

The vise’s max opening is 4-7/8”. What’s the max opening with jaw covers on? Is it the same for all covers? View answer

Asked 6 ´years ago | Infinity Tools Parrot Vise with Jaw Covers

Question 13

how much does the vise weigh without the jaw covers View answer

Asked 6 ´years ago | Infinity Tools Parrot Vise with Jaw Covers

Question 14

Is Wixey's digital table saw fence read-out compatible with the Sawstop Jobsite Saw Pro? View answer

Asked 6 ´years ago | Wixey 0" - 60" Digital Table Saw Fence Readout

Question 15

how do i attach dust collection to my 21/4 hp triton router pls View answer

Asked 6 ´years ago | Triton 2-1/4 HP (1400w) Dual Mode Plunge Router (MOF001)

Question 16

What are the dimensions of your 3 piece ultimate glass door bit sets. Specifically Art Deco set. View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank 3-Pc. Ultimate Glass Door Making Router Bit Set

Question 17

Re round nose router bits 14-190 and 14-690. Are they carbide tipped it solid carbide or HSS View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Roundnose Router Bits

Question 18

Hi, I have a craftsman brand table saw 10" model 137-248480 and I want to know if the digital fence is compatible View answer

Asked 6 ´years ago | Wixey 0" - 60" Digital Table Saw Fence Readout

Question 19

I purchased the Infinity Mobile Mitre Station plans. Is there a cut list for the Dust Collection Expansion piece, and how can I get it? View answer

Asked 6 ´years ago | Mobile Miter Saw Station Plans

Question 20

You list the "Bosch 1615/1617(fixed base only)/1618", but not the newer Bosch MRF23EVS. View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 21

I need a 10" Fine Crosscutting Saw Blade for my mitre saw but my Bosch table saw needs an 8" blade. Do you have one? View answer

Asked 6 ´years ago | Hojas de sierra de mesa combinadas Infinity Tools de 10" x 50T, orificio de 5/8"

Question 22

Can the Triton TRA001 router be adjusted from the base while mounted? Does it come with the needed wrench? View answer

Asked 6 ´years ago | Infinity Tools Aluminum Router Table Insert Plate, 9-1/4" x 11-3/4"

Question 23

what is the diameter of the center hole in the 12" x 12" base plate View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 24

Are the Insert - Pro knives made of Carbide? If so, what kind of carbide? View answer

Asked 6 ´years ago | Infinity Tools Insert Pro Reverse Glue Joint Shaper Cutter, 1-1/4" Bore

Question 25

Where are these saws made? View answer

Asked 6 ´years ago | Shark Corp. Dowel / Dovetail / Detail Saw

Question 26

Hello are Lapped Miter Joint Router Bits available with a 1/4" shank? View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Lapped Miter Joint Router Bit Set w/ 3/4" Setup Block

Question 27

I an using a 510 shopsmith with the new wider fence, will this work on this fence? View answer

Asked 6 ´years ago | JessEm Clear-Cut Table Saw Stock Guides

Question 28

Can I use your Lock Miter Master Jig LMM-002 with a standard router bit I already have? View answer

Asked 6 ´years ago | Infinity Tools 2-Pc. Lock Miter Master Jig Set - For 3/8" - 1-3/16" Stock

Question 29

Will your RTT-029 table fit my Grizzly G1023RLW without modification? Will the 3” overhang cause issues with my setup? View answer

Asked 6 ´years ago | Infinity Tools 27" x 29" Table Saw Router Table & Stand

Question 30

What is the track spacing specs on the table? View answer

Asked 6 ´years ago | Infinity Tools Drill Press Table Packages

Question 31

Can you buy replacement cutters for tools you already own? View answer

Asked 6 ´years ago | iGaging Wheel Marking, Mortise & Depth Gauge

Question 32

How do you trim veneer on an angle? View answer

Asked 6 ´years ago | Infinity Tools Handheld Edge Banding Trimmer

Question 33

your door set number 91-525 does that come with the raised panel cutter View answer

Asked 6 ´years ago | Infinity Tools 1/2" Shank Interior & Exterior Door Router Bit Set

Question 34

What is the warranty on the iGaging 6" EZ Cal Digital Caliper? Thanks View answer

Asked 6 ´years ago | iGaging 6" EZ Cal Digital Caliper

Question 35

Will this mount to a Shop Fox 1837? View answer

Asked 6 ´years ago | Infinity Tools 27" x 29" Table Saw Router Table & Stand

Question 36

What table saw does this tool fit? I have a Dewalt contractor saw. The docs don?t specify compatibility. View answer

Asked 6 ´years ago | Infinity Tools Thin-Rip Guide For Table Saw, Bandsaw & Router Table

Question 37

Will the baseplate 115-030 fit my Bosch 1617evs plunge router? View answer

Asked 6 ´years ago | Infinity Tools Universal 7.5" Router Base Plate

Question 38

Will the Miter Express and V-27 fit my Craftsman 21833? What's the max board size for the 5000 crosscut sled? View answer

Asked 6 ´years ago | INCRA Miter EXPRESS

Question 39

For a Skilsaw SPT-99, which side of the blade should the sled be assembled? View answer

Asked 6 ´years ago | INCRA Miter 5000 Table Saw Crosscut Sled

Question 40

To break edges on dog holes, should I use the 1/16” roundover bit or the 45-degree chamfer bit? View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Brass Guided Chamfer Router Bits

Question 41

can the mega be used on end grain cutting boards without a lot of tear-out/? View answer

Asked 6 ´years ago | Infinity Tools 1/4" Shank Dado Router Bit

Question 42

After you are through changing the bearing or cleaning the bit, how do you get the bit out of the device? View answer

Asked 6 ´years ago | Infinity Tools Router Bit Vise

Question 43

Can this be resharpened? View answer

Asked 6 ´years ago | Infinity Tools 10" x 80T Multi-Material Saw Blade 5/8" Bore

Question 44

can you buy replacement cutters? Or sell cutters separately. View answer

Asked 6 ´years ago | iGaging Wheel Marking, Mortise & Depth Gauge

Question 45

Does the handle control both clamping and swiveling, or is there a separate mechanism to lock/release the swivel? View answer

Asked 6 ´years ago | Infinity Tools Carver's Vise

Question 46

What is included in the Box Joint jig box (BJJ 001)? Does it include the set up blocks? View answer

Asked 6 ´years ago | Infinity Tools Box Joint Jig For Router Table & Table Saw

Question 47

Does your 101-632 hand jointer plane operate like steel planes with a Norris style cut adjuster? View answer

Asked 6 ´years ago | Infinity Tools Wood Jointer Hand Plane

Question 48

Does the 8" dado blade come with a case? View answer

Asked 6 ´years ago | Infinity Tools Dadonator Jr., 6" Stacked Dado Saw Blade Set, 5/8" Bore

Question 49

Will this fit the Ryobi p601 View answer

Asked 6 ´years ago | Placa base para enrutador con mango en D universal de Infinity Tools

Question 50

What is this sled made of? I know the brackets are aluminum but what's the rest made of? Thank you. View answer

Asked 6 ´years ago | Infinity Tools Vertical Router Sled

Browse by Topic

Tools